When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
  Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n]
  Selected by [y]:
  - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY
without selecting or depending on RESET_CONTROLLER, despite
PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

v2:
Fixed indentation to match the rest of the file.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com

The GEM CMA helpers allocate non-coherent (i.e., cached) backing storage
with dma_alloc_noncoherent(), but release it with dma_free_wc(). Fix this
with a call to dma_free_noncoherent(). Writecombining storage is still
released with dma_free_wc().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: cf8ccbc7

 ("drm: Add support for GEM buffers backed by non-coherent memory")
Acked-by: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20210708175146.10618-1-tzimmermann@suse.de

gv100_hdmi_ctrl() writes vendor_infoframe.subpack0_high to 0x6f0110, and
then overwrites it with 0. Just drop the overwrite with 0, that's clearly
a mistake.

Because of this issue the HDMI VIC is 0 instead of 1 in the HDMI Vendor
InfoFrame when transmitting 4kp30.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 290ffeaf

 ("drm/nouveau/disp/gv100: initial support")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d3bd0f7-c150-2479-9350-35d394ee772d@xs4all.nl

BO might sit in a wrong lru list as there is a small period of memory
moving and lru list updating.

Lets skip eviction if we hit such mismatch.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110043149.57554-2-xinhui.pan@amd.com


Signed-off-by: Christian König <christian.koenig@amd.com>

The postclose handler can run after the device has been removed (or the
driver has been unbound) since userspace clients are free to hold the
file open as long as they want. Because the device removal callback
frees the entire nouveau_drm structure, any reference to it in the
postclose handler will result in a use-after-free.

To reproduce this, one must simply open the device file, unbind the
driver (or physically remove the device), and then close the device
file. This was found and can be reproduced easily with the IGT
core_hotunplug tests.

To avoid this, all clients are cleaned up in the device finalization
rather than deferring it to the postclose handler, and the postclose
handler is protected by a critical section which ensures the
drm_dev_unplug() and the postclose handler won't race.

This is not an ideal fix, since as I understand the proposed plan for
the kernel<->userspace interface for hotplug support, destroying the
client before the file is closed will cause problems. However, I believe
to properly fix this issue, the lifetime of the nouveau_drm structure
needs to be extended to match the drm_device, and this proved to be a
rather invasive change. Thus, I've broken this out so the fix can be
easily backported.

This fixes with the two previous commits CVE-2020-27820 (Karol).

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-4-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14

Rather than protecting the nouveau_drm clients list with the lock within
the "client" nouveau_cli, add a dedicated lock to serialize access to
the list. This is both clearer and necessary to avoid lockdep being
upset with us when we need to iterate through all the clients in the
list and potentially lock their mutex, which is the same class as the
lock protecting the entire list.

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-3-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14

Nouveau does not currently support hot-unplugging, but it still makes
sense to switch from drm_dev_unregister() to drm_dev_unplug().
drm_dev_unplug() calls drm_dev_unregister() after marking the device as
unplugged, but only after any device critical sections are finished.

Since nouveau isn't using drm_dev_enter() and drm_dev_exit(), there are
no critical sections so this is nearly functionally equivalent. However,
the DRM layer does check to see if the device is unplugged, and if it is
returns appropriate error codes.

In the future nouveau can add critical sections in order to truly
support hot-unplugging.

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-2-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14

The reference counting issue happens in one exception handling path of
nouveau_svmm_bind(). When cli->svm.svmm is null, the function forgets
to decrease the refcount of mm increased by get_task_mm(), causing a
refcount leak.

Fix this issue by using mmput() to decrease the refcount in the
exception handling path.

Also, the function forgets to do check against null when get mm
by get_task_mm().

Fix this issue by adding null check after get mm by get_task_mm().

Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Fixes: 822cab61

 ("drm/nouveau/svm: check for SVM initialized before migrating")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907122633.16665-1-cymi20@fudan.edu.cn
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14

The code which constructs the modules for each engine present on the GPU
passes -1 for 'instance' on non-instanced engines, which affects how the
name for a sub-device is generated.  This is then stored as 'instance 0'
in nvkm_subdev.inst, so code can potentially be shared with earlier GPUs
that only had a single instance of an engine.

However, GF100's CE constructor uses this value to calculate the address
of its falcon before it's translated, resulting in CE0 getting the wrong
address.

This slightly modifies the approach, always passing a valid instance for
engines that *can* have multiple copies, and having the code for earlier
GPUs explicitly ask for non-instanced name generation.

Bug: https://gitlab.freedesktop.org/drm/nouveau/-/issues/91

Fixes: 50551b15

 ("drm/nouveau/ce: switch to instanced constructor")
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103011057.15344-1-skeggsb@gmail.com

drm_gem_ttm_mmap() drops a reference to the gem object on success. If
the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that
drop will free the gem object, and the subsequent drm_gem_object_get()
will be a UAF. Fix by grabbing a reference before calling the mmap
helper.

This issue was forseen when the reference dropping was adding in
commit 9786b65b

 ("drm/ttm: fix mmap refcounting"):
  "For that to work properly the drm_gem_object_get() call in
  drm_gem_ttm_mmap() must be moved so it happens before calling
  obj->funcs->mmap(), otherwise the gem refcount would go down
  to zero."

Signed-off-by: Anand K Mistry <amistry@google.com>
Fixes: 9786b65b

 ("drm/ttm: fix mmap refcounting")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930085932.1.I8043d61cc238e0168e2f4ca5f4783223434aa587@changeid

Because dma-buf.name can be freed in func: "dma_buf_set_name",
so, we need to acquire lock first before we read/write dma_buf.name
to prevent Use After Free(UAF) issue.

Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211008075420.42874-1-guangming.cao@mediatek.com

Fixes screen orientation for GPD Win 3 handheld gaming console.

Signed-off-by: Mario Risoldi <awxkrnl@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026112737.9181-1-awxkrnl@gmail.com

I forgot to do this properly in

commit 6f11f374


Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jul 23 10:34:55 2021 +0200

    drm/plane: remove drm_helper_get_plane_damage_clips

intel-gfx CI didn't spot this because we run each selftest in each own
invocations, which means reloading i915.ko. But if you just run all
the selftests in one go at boot-up, then it falls apart and eventually
we cross over the hardcoded limited of how many properties can be
attached to a single object.

Fix this by resetting the property count. Nothing else to clean up
since it's all static storage anyway.

Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 6f11f374

 ("drm/plane: remove drm_helper_get_plane_damage_clips")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021202048.2638668-1-daniel.vetter@ffwll.ch

Fixes screen orientation for the Aya Neo 2021 handheld gaming console.

Signed-off-by: Bryant Mairs <bryant@mai.rs>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019142433.4295-1-bryant@mai.rs

We need to cleanup the fences for ghost objects as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447
CC: <stable@vger.kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020173211.2247-1-christian.koenig@amd.com

On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.

v2: changed to atomic_bridge_chain_enable (Sam)

Fixes: 98521f4d

 ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com


Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Check for Overflow bits for layer3 in the irq handler.

Fixes: 7f7b96a8

 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Due to HW limitations, KMB cannot change height, width, or
pixel format after initial plane configuration.

v2: removed memset disp_cfg as it is already zero.

Fixes: 7f7b96a8

 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during
DSI initialization since this was causing MIPI Rx reset. Rest of the
writes are bitwise, so will not affect Mipi Rx side.

Fixes: 98521f4d

 ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

KMB only supports single resolution(1080p), this commit checks for
1920x1080x60 or 1920x1080x59 in crtc_mode_valid.
Also, modes with vfp < 4 are not supported in KMB display. This change
prunes display modes with vfp < 4.

v2: added vfp check

Fixes: 7f7b96a8

 ("drm/kmb: Add support for KeemBay Display")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Use a different value for system clock offset in the
ppl/llp ratio calculations for clocks higher than 500 Mhz.

Fixes: 98521f4d

 ("drm/kmb: Mipi DSI part of the display driver")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

This adjusts sync values according to the datasheet

Fixes: 1c243751

 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel")
Co-developed-by: Marius Gripsgard <marius@ubports.com>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.

Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.

Fixes: ae1ed009

 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Pull libata fixes from Damien Le Moal:
 "Two fixes for this cycle:

   - Fix a null pointer dereference in ahci-platform driver (from Hai)

   - Fix uninitialized variables in pata_legacy driver (from Dan)"

* tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()
  pata_legacy: fix a couple uninitialized variable bugs

Pull block fixes from Jens Axboe:
 "Bigger than usual for this point in time, the majority is fixing some
  issues around BDI lifetimes with the move from the request_queue to
  the disk in this release. In detail:

   - Series on draining fs IO for del_gendisk() (Christoph)

   - NVMe pull request via Christoph:
        - fix the abort command id (Keith Busch)
        - nvme: fix per-namespace chardev deletion (Adam Manzanares)

   - brd locking scope fix (Tetsuo)

   - BFQ fix (Paolo)"

* tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
  block, bfq: reset last_bfqq_created on group change
  block: warn when putting the final reference on a registered disk
  brd: reduce the brd_devices_mutex scope
  kyber: avoid q->disk dereferences in trace points
  block: keep q_usage_counter in atomic mode after del_gendisk
  block: drain file system I/O on del_gendisk
  block: split bio_queue_enter from blk_queue_enter
  block: facto...

Pull io_uring fix from Jens Axboe:
 "Just a single fix for a wrong condition for grabbing a lock, a
  regression in this merge window"

* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
  io_uring: fix wrong condition to grab uring lock

Pull virtio fixes from Michael Tsirkin:
 "Fixes up some issues in rc5"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: Fix the wrong input in config_cb
  VDUSE: fix documentation underline warning
  Revert "virtio-blk: Add validation for block size in config space"
  vhost_vdpa: unset vq irq before freeing irq
  virtio: write back F_VERSION_1 before validate

Pull powerpc fixes from Michael Ellerman:

 - Fix a bug where guests on P9 with interrupts passed through could get
   stuck in synchronize_irq().

 - Fix a bug in KVM on P8 where secondary threads entering a guest would
   write outside their allocated stack.

 - Fix a bug in KVM on P8 where secondary threads could confuse the host
   offline code and cause the guest or host to crash.

Thanks to Cédric Le Goater.

* tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest
  KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
  powerpc/xive: Discard disabled interrupts in get_irqchip_state()

Pull objtool fixes from Borislav Petkov:

 - Update section headers before the respective relocations to not
   trigger a safety check in elftoolchain's implementation of libelf

 - Do not add garbage data to the .rela.orc_unwind_ip section

* tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Update section header before relocations
  objtool: Check for gelf_update_rel[a] failures

Pull EDAC fix from Borislav Petkov:

 - Log the "correct" uncorrectable error count in the armada_xp driver

* tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/armada-xp: Fix output of uncorrectable error counter

Pull perf fix from Borislav Petkov:

 - Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR

* tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/msr: Add Sapphire Rapids CPU support

Pull EFI fixes from Borislav Petkov:
 "Forwarded from Ard Biesheuvel through the tip tree. Ard will send
  stuff directly in the near future.

  Low priority fixes but fixes nonetheless:

   - update stub diagnostic print that is no longer accurate

   - avoid statically allocated buffer for CPER error record decoding

   - avoid sleeping on the efi_runtime semaphore when calling the
     ResetSystem EFI runtime service"

* tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()
  efi/cper: use stack buffer for error record decoding
  efi/libstub: Simplify "Exiting bootservices" message

Pull x86 fixes from Borislav Petkov:

 - Do not enable AMD memory encryption in Kconfig by default due to
   shortcomings of some platforms, leading to boot failures.

 - Mask out invalid bits in the MXCSR for 32-bit kernels again because
   Thomas and I don't know how to mask out bits properly. Third time's
   the charm.

* tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Mask out the invalid MXCSR bits properly
  x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically

Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some small driver core fixes for 5.15-rc6, all of which have
  been in linux-next for a while with no reported issues.

  They include:

   - kernfs negative dentry bugfix

   - simple pm bus fixes to resolve reported issues"

* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
  drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
  driver core: Reject pointless SYNC_STATE_ONLY device links
  kernfs: don't create a negative dentry if inactive node exists

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.15-rc6 for reported
  issues that include:

   - habanalabs driver fixes

   - mei driver fixes and new ids

   - fpga new device ids

   - MAINTAINER file updates for fpga subsystem

   - spi module id table additions and fixes

   - fastrpc locking fixes

   - nvmem driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  eeprom: 93xx46: fix MODULE_DEVICE_TABLE
  nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
  mei: hbm: drop hbm responses on early shutdown
  mei: me: add Ice Lake-N device id.
  eeprom: 93xx46: Add SPI device ID table
  eeprom: at25: Add SPI ID table
  misc: HI6421V600_IRQ should depend on HAS_IOMEM
  misc: fastrpc: Add missing lock before accessing find_vma()
  cb710: avoid NULL pointer subtraction
  misc: gehc: Add SPI ID table
  MAINTAINERS: Drop outdated FPGA Manager website
  MAINTAINERS: Add Hao and Yilun as maintainers
  habanalabs: fix resetting args in wait for CS IOCTL
  fpga: ice40-spi: Add SPI device ID table

Pull staging and IIO driver fixes from Greg KH:
 "Here are a number of small IIO and staging driver fixes for 5.15-rc6.

  They include:

   - vc04_services bugfix for reported problem

   - r8188eu array underflow fix

   - iio driver fixes for a lot of tiny reported issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask()
  staging: vc04_services: shut up out-of-range warning
  iio: light: opt3001: Fixed timeout error when 0 lux
  iio: adis16480: fix devices that do not support sleep mode
  iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED
  iio: adis16475: fix deadlock on frequency set
  iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
  iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
  iio: adc: ad7793: Fix IRQ flag
  iio: adc: ad7780: Fix IRQ flag
  iio: adc: ad7192: Add IRQ flag
  iio: adc: aspeed: set driver data when adc probe.
  iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume()
  iio: adc: max1027: Fix the number of max1X31 channels
  iio: adc: max1027: Fix wrong shift with 12-bit devices
  iio: adc128s052: Fix the error handling path of 'adc128_probe()'
  iio: adc: rzg2l_adc: Fix -EBUSY timeout error return
  iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed
  iio: dac: ti-dac5571: fix an error code in probe()

Pull serial driver fix from Greg KH:
 "Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a
  regression that showed up in 5.15-rc1. It has been in linux-next for a
  while with no reported issues"

* tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250: allow disabling of Freescale 16550 compile test

Pull USB fixes from Greg KH:
 "Here are some small USB fixes that resolve a number of tiny issues.
  They include:

   - new USB serial driver ids

   - xhci driver fixes for a bunch of issues

   - musb error path fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: musb: dsps: Fix the probe error path
  xhci: Enable trust tx length quirk for Fresco FL11 USB controller
  xhci: Fix command ring pointer corruption while aborting a command
  USB: xhci: dbc: fix tty registration race
  xhci: add quirk for host controllers that don't update endpoint DCS
  xhci: guard accesses to ep_state in xhci_endpoint_reset()
  USB: serial: qcserial: add EM9191 QDL support
  USB: serial: option: add Quectel EC200S-CN module support
  USB: serial: option: add prod. id for Quectel EG91
  USB: serial: option: add Telit LE910Cx composition 0x1204

Pull input fixes from Dmitry Torokhov:

 - a new product ID for the xpad joystick driver

 - fixes to resistive-adc-touch and snvs_pwrkey drivers

 - a change to touchscreen helpers to make clang happier

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: touchscreen - avoid bitwise vs logical OR warning
  Input: xpad - add support for another USB ID of Nacon GC-100
  Input: resistive-adc-touch - fix division by zero error on z1 == 0
  Input: snvs_pwrkey - add clk handling