diff --git a/boards/beagleconnect/index.rst b/boards/beagleconnect/index.rst
index 0ebaa334019fce75af8c21ab4fdd0583bc8d63d8..e11ccd7f64bb6eb4912c4aca19f1b09a994698c8 100644
--- a/boards/beagleconnect/index.rst
+++ b/boards/beagleconnect/index.rst
@@ -49,6 +49,7 @@ BeagleConnectâ„¢ technology solves:
/boards/beagleconnect/technology/index.rst
/boards/beagleconnect/technology/story.rst
+ /boards/beagleconnect/technology/beagleplay_demo.rst
BeagleConnect Experience
*************************
diff --git a/boards/beagleplay/05-demos.rst b/boards/beagleplay/05-demos.rst
index 4501442468961174c9e87c9ff7123f05ef158989..948ce50a8536a05e070a58f768fe8b02696cc5af 100644
--- a/boards/beagleplay/05-demos.rst
+++ b/boards/beagleplay/05-demos.rst
@@ -115,6 +115,16 @@ Demos and tutorials
intermediate
+.. card::
+ :link: greybus-host
+ :link-type: ref
+
+ **Bealgplay Greybus Host**
+ +++
+ .. admonition:: Complexity level
+
+ intermediate
+
.. raw:: latex
\end{comment}
@@ -132,3 +142,4 @@ Demos and tutorials
demos-and-tutorials/using-csi
demos-and-tutorials/zephyr-cc1352-development
demos-and-tutorials/play-kernel-development
+ demos-and-tutorials/greybus-host
diff --git a/boards/beagleplay/demos-and-tutorials/greybus-host.rst b/boards/beagleplay/demos-and-tutorials/greybus-host.rst
new file mode 100644
index 0000000000000000000000000000000000000000..2f19be19b74ce1d862fe457f0ffcefc2a0577468
--- /dev/null
+++ b/boards/beagleplay/demos-and-tutorials/greybus-host.rst
@@ -0,0 +1,187 @@
+.. _greybus-host:
+
+BeagleConnectâ„¢ Greybus demo using BeagleConnectâ„¢ Freedom and BeaglePlay
+#######################################################################
+
+BeaglePlay CC1352 Firmware
+**************************
+
+Build
+=====
+#. Download and setup Zephyr for BeaglePlay
+
+ .. code-block:: bash
+
+ cd
+ sudo apt update
+ sudo apt install --no-install-recommends -y \
+ gperf \
+ ccache dfu-util \
+ libsdl2-dev \
+ libxml2-dev libxslt1-dev libssl-dev libjpeg62-turbo-dev libmagic1 \
+ libtool-bin autoconf automake libusb-1.0-0-dev \
+ python3-tk python3-virtualenv
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.16.3/zephyr-sdk-0.16.3_linux-aarch64_minimal.tar.gz
+ tar xf zephyr-sdk-0.16.3_linux-aarch64_minimal.tar.gz
+ rm zephyr-sdk-0.16.3_linux-aarch64_minimal.tar.gz
+ ./zephyr-sdk-0.16.3/setup.sh -t arm-zephyr-eabi -c
+ west init -m https://git.beagleboard.org/beagleconnect/zephyr/zephyr --mr sdk-next zephyr-beagle-cc1352-sdk
+ cd $HOME/zephyr-beagle-cc1352-sdk
+ python3 -m virtualenv zephyr-beagle-cc1352-env
+ echo "export ZEPHYR_TOOLCHAIN_VARIANT=zephyr" >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ echo "export ZEPHYR_SDK_INSTALL_DIR=$HOME/zephyr-sdk-0.16.3" >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ echo "export ZEPHYR_BASE=$HOME/zephyr-beagle-cc1352-sdk/zephyr" >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ echo 'export PATH=$HOME/zephyr-beagle-cc1352-sdk/zephyr/scripts:$PATH' >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ echo "export BOARD=beagleplay_cc1352" >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ source $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+ west update
+ west zephyr-export
+ pip3 install -r zephyr/scripts/requirements-base.txt
+
+#. Activate the Zephyr build environment
+
+ If you exit and come back, you'll need to reactivate your Zephyr build environment.
+
+ .. code-block:: bash
+
+ source $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
+
+#. Verify Zephyr setup for BeaglePlay
+
+ .. code-block:: shell-session
+
+ (zephyr-beagle-cc1352-env) debian@BeaglePlay:~$ cmake --version
+ cmake version 3.22.1
+
+ CMake suite maintained and supported by Kitware (kitware.com/cmake).
+ (zephyr-beagle-cc1352-env) debian@BeaglePlay:~$ python3 --version
+ Python 3.9.2
+ (zephyr-beagle-cc1352-env) debian@BeaglePlay:~$ dtc --version
+ Version: DTC 1.6.0
+ (zephyr-beagle-cc1352-env) debian@BeaglePlay:~$ west --version
+ West version: v0.14.0
+ (zephyr-beagle-cc1352-env) debian@BeaglePlay:~$ ./zephyr-sdk-0.16.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc --version
+ arm-zephyr-eabi-gcc (Zephyr SDK 0.16.3) 12.1.0
+ Copyright (C) 2022 Free Software Foundation, Inc.
+ This is free software; see the source for copying conditions. There is NO
+ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+#. Clone CC1352 Firmware at top level: https://git.beagleboard.org/gsoc/greybus/cc1352-firmware
+
+ .. code-block:: bash
+
+ git clone https://git.beagleboard.org/gsoc/greybus/cc1352-firmware
+
+#. Build the Firmware
+
+ .. code-block:: bash
+
+ west build -b beagleplay_cc1352 -p always cc1352-firmware
+
+#. You can now find the built firmware at `build/zephyr/zephyr.bin`
+
+Flash
+=====
+#. Ensure the `gb-beagleplay` driver isn't blocking the serial port.
+
+ .. code-block:: bash
+
+ debian@BeaglePlay:~$ echo " fdtoverlays /overlays/k3-am625-beagleplay-bcfserial-no-firmware.dtbo" | sudo tee -a /boot/firmware/extlinux/extlinux.conf
+ debian@BeaglePlay:~$ sudo shutdown -r now
+
+ .. note::
+
+ The default password is `temppwd`.
+
+#. Flash Firmware
+
+ .. code-block:: bash
+
+ west flash -b beagleplay_cc1352
+
+#. Ensure the `gb-beagleplay` driver is set to load.
+
+ .. code-block:: bash
+
+ sudo sed -e '/bcfserial-no-firmware/ s/^#*/#/' -i /boot/firmware/extlinux/extlinux.conf
+ sudo shutdown -r now
+
+Installing Kernel
+*****************
+.. note::
+ Check if it possible to use bbb.io-kernel-6.6-k3.
+
+Flashing BeagleConnect Freedom Greybus Firmware
+***********************************************
+#. Connect beagleconnect freedom to beagleplay
+#. Build beagleconnect freedom firmware
+
+.. code-block:: bash
+
+ west build -b beagleconnect_freedom modules/greybus/samples/subsys/greybus/net/ -p -- -DOVERLAY_CONFIG=overlay-802154-subg.conf
+
+#. Flash bcf
+
+.. code-block:: bash
+
+ west flash
+
+Run Demo
+*********
+#. Connect beagleconnect.
+#. See shell output using `tio`
+
+ .. code-block:: bash
+
+ tio /dev/ACM0
+
+#. Press reset button on beagleconnect freedom.
+
+#. Verify that greybus is working by checking the `tio` output. It should look as follows:
+
+ .. code-block:: bash
+
+ [00:00:00.000,976] <dbg> greybus_platform_bus: greybus_init: probed greybus: 0 major: 0 minor: 1
+ [00:00:00.001,068] <dbg> greybus_platform_string: greybus_string_init: probed greybus string 4: hdc2010
+ [00:00:00.001,129] <dbg> greybus_platform_string: greybus_string_init: probed greybus string 3: opt3001
+ [00:00:00.001,190] <dbg> greybus_platform_string: greybus_string_init: probed greybus string 2: Greybus Service Sample Application
+ [00:00:00.001,251] <dbg> greybus_platform_string: greybus_string_init: probed greybus string 1: Zephyr Project RTOS
+ [00:00:00.001,251] <dbg> greybus_platform_interface: greybus_interface_init: probed greybus interface 0
+ [00:00:00.001,281] <dbg> greybus_platform_bundle: greybus_bundle_init: probed greybus bundle 1: class: 10
+ [00:00:00.001,312] <dbg> greybus_platform_bundle: greybus_bundle_init: probed greybus bundle 0: class: 0
+ [00:00:00.001,342] <dbg> greybus_platform_control: greybus_control_init: probed cport 0: bundle: 0 protocol: 0
+ [00:00:00.001,434] <dbg> greybus_platform: gb_add_cport_device_mapping: added mapping between cport 1 and device gpio@40022000
+ [00:00:00.001,464] <dbg> greybus_platform_gpio_control: greybus_gpio_control_init: probed cport 1: bundle: 1 protocol: 2
+ [00:00:00.001,556] <dbg> greybus_platform: gb_add_cport_device_mapping: added mapping between cport 2 and device sensor-switch
+ [00:00:00.001,556] <dbg> greybus_platform_i2c_control: greybus_i2c_control_init: probed cport 2: bundle: 1 protocol: 3
+ *** Booting Zephyr OS build bcf-sdk-0.2.1-3384-ge76584f824c8 ***
+ [00:00:00.009,704] <dbg> greybus_service: greybus_service_init: Greybus initializing..
+ [00:00:00.009,765] <dbg> greybus_manifest: identify_descriptor: cport_id = 0
+ [00:00:00.009,796] <dbg> greybus_manifest: identify_descriptor: cport_id = 1
+ [00:00:00.009,826] <dbg> greybus_manifest: identify_descriptor: cport_id = 2
+ [00:00:00.009,857] <dbg> greybus_transport_tcpip: gb_transport_backend_init: Greybus TCP/IP Transport initializing..
+ [00:00:00.010,101] <inf> greybus_transport_tcpip: CPort 0 mapped to TCP/IP port 4242
+ [00:00:00.014,709] <inf> greybus_transport_tcpip: CPort 1 mapped to TCP/IP port 4243
+ [00:00:00.014,953] <inf> greybus_transport_tcpip: CPort 2 mapped to TCP/IP port 4244
+ [00:00:00.015,075] <inf> greybus_transport_tcpip: Greybus TCP/IP Transport initialized
+ [00:00:00.015,136] <inf> greybus_manifest: Registering CONTROL greybus driver.
+ [00:00:00.015,167] <dbg> greybus: _gb_register_driver: Registering Greybus driver on CP0
+ [00:00:00.015,411] <inf> greybus_manifest: Registering GPIO greybus driver.
+ [00:00:00.015,411] <dbg> greybus: _gb_register_driver: Registering Greybus driver on CP1
+ [00:00:00.015,625] <inf> greybus_manifest: Registering I2C greybus driver.
+ [00:00:00.015,625] <dbg> greybus: _gb_register_driver: Registering Greybus driver on CP2
+ [00:00:00.015,777] <inf> greybus_service: Greybus is active
+ uart:~$
+
+#. Check if `gb-beagleplay` is loaded:
+
+ .. code-block:: bash
+
+ debian@BeaglePlay:~$ lsmod | grep gb-beagleplay
+
+#. Check `iio_device` to verify that greybus node has been detected:
+
+ .. code-block:: bash
+
+ debian@BeaglePlay:~$ iio_device
+