- Jan 20, 2022
-
-
Isabella Basso authored
Use KUnit framework to make tests more easily integrable with CIs. Even though these tests are not yet properly written as unit tests this change should help in debugging. Also remove kernel messages (i.e. through pr_info) as KUnit handles all debugging output and let it handle module init and exit details. Link: https://lkml.kernel.org/r/20211208183711.390454-6-isabbasso@riseup.net Reviewed-by:
David Gow <davidgow@google.com> Reported-by:
kernel test robot <lkp@intel.com> Tested-by:
Augusto Durães Camargo <augusto.duraes33@gmail.com> Signed-off-by:
Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by:
Isabella Basso <isabbasso@riseup.net> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Isabella Basso authored
Split TEST_HASH so that each entry only has one file. Note that there's no stringhash test file, but actually <linux/stringhash.h> tests are performed in lib/test_hash.c. Link: https://lkml.kernel.org/r/20211208183711.390454-5-isabbasso@riseup.net Reviewed-by:
-
Isabella Basso authored
Split up test_hash_init so that it calls each test more explicitly insofar it is possible without rewriting the entire file. This aims at improving readability. Split tests performed on string_or as they don't interfere with those performed in hash_or. Also separate pr_info calls about skipped tests as they're not part of the tests themselves, but only warn about (un)defined arch-specific hash functions. Link: https://lkml.kernel.org/r/20211208183711.390454-4-isabbasso@riseup.net Reviewed-by:
-
Isabella Basso authored
Split the test_int_hash function to keep its mainloop separate from arch-specific chunks, which are only compiled as needed. This aims at improving readability. Link: https://lkml.kernel.org/r/20211208183711.390454-3-isabbasso@riseup.net Reviewed-by:
-
Isabella Basso authored
Patch series "test_hash.c: refactor into KUnit", v3. We refactored the lib/test_hash.c file into KUnit as part of the student group LKCAMP [1] introductory hackathon for kernel development. This test was pointed to our group by Daniel Latypov [2], so its full conversion into a pure KUnit test was our goal in this patch series, but we ran into many problems relating to it not being split as unit tests, which complicated matters a bit, as the reasoning behind the original tests is quite cryptic for those unfamiliar with hash implementations. Some interesting developments we'd like to highlight are: - In patch 1/5 we noticed that there was an unused define directive that could be removed. - In patch 4/5 we noticed how stringhash and hash tests are all under the lib/test_hash.c file, which might cause some confusion, and we also broke those kernel config entries up. Overall KUnit developments have been made in the other patches in this series: In patche...
-
Zhen Lei authored
Currently, the entry->prev and entry->next are considered to be valid as long as they are not LIST_POISON{1|2}. However, the memory may be corrupted. The prev->next is invalid probably because 'prev' is invalid, not because prev->next's content is illegal. Unfortunately, the printk and its subfunctions will modify the registers that hold the 'prev' and 'next', and we don't see this valuable information in the BUG context. So print the contents of 'entry->prev' and 'entry->next'. Here's an example: list_del corruption. prev->next should be c0ecbf74, but was c08410dc kernel BUG at lib/list_debug.c:53! ... ... PC is at __list_del_entry_valid+0x58/0x98 LR is at __list_del_entry_valid+0x58/0x98 psr: 60000093 sp : c0ecbf30 ip : 00000000 fp : 00000001 r10: c08410d0 r9 : 00000001 r8 : c0825e0c r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74 r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044 ... ... Stack: (0xc0ecbf30 to 0xc0ecc000) bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170 bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013 bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08 bf80: c0e807c0 c018965c 00000000 c013f2a0 c0e807c0 c013f154 00000000 00000000 bfa0: 00000000 00000000 00000000 c01001b0 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 (__list_del_entry_valid) from (__list_del_entry+0xc/0x20) (__list_del_entry) from (finish_swait+0x60/0x7c) (finish_swait) from (rcu_gp_kthread+0x560/0xa20) (rcu_gp_kthread) from (kthread+0x14c/0x15c) (kthread) from (ret_from_fork+0x14/0x24) At first, I thought prev->next was overwritten. Later, I carefully analyzed the RCU code and the disassembly code. The error occurred when deleting a node from the list rcu_state.gp_wq. The System.map shows that the address of rcu_state is c0840c00. Then I use gdb to obtain the offset of rcu_state.gp_wq.task_list. (gdb) p &((struct rcu_state *)0)->gp_wq.task_list $1 = (struct list_head *) 0x4dc Again: list_del corruption. prev->next should be c0ecbf74, but was c08410dc c08410dc = c0840c00 + 0x4dc = &rcu_state.gp_wq.task_list Because rcu_state.gp_wq has at most one node, so I can guess that "prev = &rcu_state.gp_wq.task_list". But for other scenes, maybe I wasn't so lucky, I cannot figure out the value of 'prev'. Link: https://lkml.kernel.org/r/20211207025835.1909-1-thunder.leizhen@huawei.com Signed-off-by:Zhen Lei <thunder.leizhen@huawei.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Andy Shevchenko authored
Introduce list_is_head() in the similar (*) way as it's done for list_entry_is_head(). Make use of it in the list.h. *) it's done as inliner and not a macro to be aligned with other list_is_*() APIs; while at it, make all three to have the same style. Link: https://lkml.kernel.org/r/20211201141824.81400-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Alexey Dobriyan authored
I've made a mistake of looking into lib/kstrtox.o code generation. The only function remotely performance critical is _parse_integer() (via /proc/*/map_files/*), everything else is not. Uninline everything, shrink lib/kstrtox.o by ~20 % ! Space savings on x86_64: add/remove: 0/0 grow/shrink: 0/23 up/down: 0/-1269 (-1269 !!!) Function old new delta kstrtoull 16 13 -3 kstrtouint 59 48 -11 kstrtou8 60 49 -11 kstrtou16 61 50 -11 _kstrtoul 46 35 -11 kstrtoull_from_user 95 83 -12 kstrtoul_from_user 95 83 -12 kstrtoll 93 80 -13 kstrtouint_from_user 124 83 -41 kstrtou8_from_user 125 83 -42 kstrtou16_from_user 126 83 -43 kstrtos8 101 50 -51 kstrtos16 102 51 -51 kstrtoint 100 49 -51 _kstrtol 93 35 -58 kstrtobool_from_user 156 75 -81 kstrtoll_from_user 165 83 -82 kstrtol_from_user 165 83 -82 kstrtoint_from_user 172 83 -89 kstrtos8_from_user 173 83 -90 kstrtos16_from_user 174 83 -91 _parse_integer 136 10 -126 _kstrtoull 308 101 -207 Total: Before=3421236, After=3419967, chg -0.04% Link: https://lkml.kernel.org/r/YZDsFDhHst4m2Pnt@localhost.localdomain Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Randy Dunlap authored
When --nogit is used with scripts/get_maintainer.pl, the script spews 4 lines of unnecessary information (noise). Do not print those lines when --nogit is specified. This change removes the printing of these 4 lines: ./scripts/get_maintainer.pl: No supported VCS found. Add --nogit to options? Using a git repository produces better results. Try Linus Torvalds' latest git repository using: git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Link: https://lkml.kernel.org/r/20220102031424.3328-1-rdunlap@infradead.org Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Davidlohr Bueso authored
PRIO_PGRP needs the tasklist_lock mainly to serialize vs setpgid(2), to protect against any concurrent change_pid(PIDTYPE_PGID) that can move the task from one hlist to another while iterating. However, the remaining can only rely only on RCU: PRIO_PROCESS only does the task lookup and never iterates over tasklist and we already have an rcu-aware stable pointer. PRIO_USER is already racy vs setuid(2) so with creds being rcu protected, we can end up seeing stale data. When removing the tasklist_lock there can be a race with (i) fork but this is benign as the child's nice is inherited and the new task is not observable by the user yet either, hence the return semantics do not differ. And (ii) a race with exit, which is a small window and can cause us to miss a task which was removed from the list and it had the highest nice. Similarly change the buggy do_each_thread/while_each_thread combo in PRIO_USER for the rcu-safe for_each_proce...
-
Yafang Shao authored
When I was implementing a new per-cpu kthread cfs_migration, I found the comm of it "cfs_migration/%u" is truncated due to the limitation of TASK_COMM_LEN. For example, the comm of the percpu thread on CPU10~19 all have the same name "cfs_migration/1", which will confuse the user. This issue is not critical, because we can get the corresponding CPU from the task's Cpus_allowed. But for kthreads corresponding to other hardware devices, it is not easy to get the detailed device info from task comm, for example, jbd2/nvme0n1p2- xfs-reclaim/sdf Currently there are so many truncated kthreads: rcu_tasks_kthre rcu_tasks_rude_ rcu_tasks_trace poll_mpt3sas0_s ext4-rsv-conver xfs-reclaim/sd{a, b, c, ...} xfs-blockgc/sd{a, b, c, ...} xfs-inodegc/sd{a, b, c, ...} audit_send_repl ecryptfs-kthrea vfio-irqfd-clea jbd2/nvme0n1p2- ... We can shorten these names to work around this problem, bu... -
Yafang Shao authored
As the sched:sched_switch tracepoint args are derived from the kernel, we'd better make it same with the kernel. So the macro TASK_COMM_LEN is converted to type enum, then all the BPF programs can get it through BTF. The BPF program which wants to use TASK_COMM_LEN should include the header vmlinux.h. Regarding the test_stacktrace_map and test_tracepoint, as the type defined in linux/bpf.h are also defined in vmlinux.h, so we don't need to include linux/bpf.h again. Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Acked-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
-
Yafang Shao authored
tools/bpf/bpftool/skeleton: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm bpf_probe_read_kernel_str() will add a nul terminator to the dst, then we don't care about if the dst size is big enough. Link: https://lkml.kernel.org/r/20211120112738.45980-7-laoar.shao@gmail.com Signed-off-by:
-
Yafang Shao authored
samples/bpf/test_overhead_kprobe_kern: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm bpf_probe_read_kernel_str() will add a nul terminator to the dst, then we don't care about if the dst size is big enough. This patch also replaces the hard-coded 16 with TASK_COMM_LEN to make it grepable. Link: https://lkml.kernel.org/r/20211120112738.45980-6-laoar.shao@gmail.com Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Yafang Shao authored
It is better to use get_task_comm() instead of the open coded string copy as we do in other places. struct elf_prpsinfo is used to dump the task information in userspace coredump or kernel vmcore. Below is the verification of vmcore, crash> ps PID PPID CPU TASK ST %MEM VSZ RSS COMM 0 0 0 ffffffff9d21a940 RU 0.0 0 0 [swapper/0] > 0 0 1 ffffa09e40f85e80 RU 0.0 0 0 [swapper/1] > 0 0 2 ffffa09e40f81f80 RU 0.0 0 0 [swapper/2] > 0 0 3 ffffa09e40f83f00 RU 0.0 0 0 [swapper/3] > 0 0 4 ffffa09e40f80000 RU 0.0 0 0 [swapper/4] > 0 0 5 ffffa09e40f89f80 RU 0.0 0 0 [swapper/5] 0 0 6 ffffa09e40f8bf00 RU 0.0 0 0 [swapper/6] > 0 0 7 ffffa09e40f88000 RU 0.0 0 0 [swapper/7] > 0 0 8 ffffa09e40f8de80 RU 0.0 0 0 [swapper/8] > 0 0 9 ffffa09e40f95e80 RU 0.0 0 0 [swapper/9] > 0 0 10 ffffa09e40f91f80 RU 0.0 0 0 [swapper/10] > 0 0 11 ffffa09e40f93f00 RU 0.0 0 0 [swapper/11] > 0 0 12 ffffa09e40f90000 RU 0.0 0 0 [swapper/12] > 0 0 13 ffffa09e40f9bf00 RU 0.0 0 0 [swapper/13] > 0 0 14 ffffa09e40f98000 RU 0.0 0 0 [swapper/14] > 0 0 15 ffffa09e40f9de80 RU 0.0 0 0 [swapper/15] It works well as expected. Some comments are added to explain why we use the hard-coded 16. Link: https://lkml.kernel.org/r/20211120112738.45980-5-laoar.shao@gmail.com Suggested-by: -
Yafang Shao authored
We'd better use the helper get_task_comm() rather than the open-coded strlcpy() to get task comm. As the comment above the hard-coded 16, we can replace it with TASK_COMM_LEN. Link: https://lkml.kernel.org/r/20211120112738.45980-4-laoar.shao@gmail.com Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Reviewed-by:
-
Yafang Shao authored
If the dest buffer size is smaller than sizeof(tsk->comm), the buffer will be without null ternimator, that may cause problem. Using strscpy_pad() instead of strncpy() in __get_task_comm() can make the string always nul ternimated and zero padded. Link: https://lkml.kernel.org/r/20211120112738.45980-3-laoar.shao@gmail.com Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Yafang Shao authored
Patch series "task comm cleanups", v2. This patchset is part of the patchset "extend task comm from 16 to 24"[1]. Now we have different opinion that dynamically allocates memory to store kthread's long name into a separate pointer, so I decide to take the useful cleanups apart from the original patchset and send it separately[2]. These useful cleanups can make the usage around task comm less error-prone. Furthermore, it will be useful if we want to extend task comm in the future. [1]. https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/ [2]. https://lore.kernel.org/lkml/CALOAHbAx55AUo3bm8ZepZSZnw7A08cvKPdPyNTf=E_tPqmw5hw@mail.gmail.com/ This patch (of 7): strlcpy() can trigger out-of-bound reads on the source string[1], we'd better use strscpy() instead. To make it be robust against full tsk->comm copies that got noticed in other places, we should make sure it's zero padded. [1] https://github.com/KSPP/linux/issues/89 Link: https://lkml.kernel.org/r/20211120112738.45980-1-laoar.shao@gmail.com Link: https://lkml.kernel.org/r/20211120112738.45980-2-laoar.shao@gmail.com Signed-off-by:
-
Andy Shevchenko authored
Include a note at the top to discourage people from including it in headers. Link: https://lkml.kernel.org/r/20211209150803.4473-1-andriy.shevchenko@linux.intel.com Signed-off-by:
-
Andy Shevchenko authored
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. The rest of the changes are induced by the above and may not be split. Link: https://lkml.kernel.org/r/20211209123823.20425-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Kalle Valo <kvalo@kernel.org> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Wright Feng <wright.feng@infineon.com> Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
luo penghao authored
Subsequent if judgments will assign new values to ret, so the statement here should be deleted The clang_analyzer complains as follows: fs/proc/proc_sysctl.c: Value stored to 'ret' is never read Link: https://lkml.kernel.org/r/20211230063622.586360-1-luo.penghao@zte.com.cn Signed-off-by:
luo penghao <luo.penghao@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
sysctl_print_dir() always terminates the printed path name with a slash, so printing a slash before the file part causes a duplicate like in sysctl duplicate entry: /kernel//perf_user_access Fix this by dropping the extra slash. Link: https://lkml.kernel.org/r/e3054d605dc56f83971e4b6d2f5fa63a978720ad.1641551872.git.geert+renesas@glider.be Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
-
Qi Zheng authored
Convert return type of proc_fd_access_allowed() and the 'allowed' in it to be boolean since the return type of ptrace_may_access() is boolean. Link: https://lkml.kernel.org/r/20211219024404.29779-1-zhengqi.arch@bytedance.com Signed-off-by:
Qi Zheng <zhengqi.arch@bytedance.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Hans de Goede authored
Change the proc_create[_data]() stubs which are used when CONFIG_PROC_FS is not set from #defines to a static inline stubs. This should fix clang -Werror builds failing due to errors like this: drivers/platform/x86/thinkpad_acpi.c:918:30: error: unused variable 'dispatch_proc_ops' [-Werror,-Wunused-const-variable] Fixing this in include/linux/proc_fs.h should ensure that the same issue is also fixed in any other drivers hitting the same -Werror issue. [akpm@linux-foundation.org: fix CONFIG_PROC_FS=n] [akpm@linux-foundation.org: fix arch/sparc/kernel/led.c] [akpm@linux-foundation.org: fix build] Link: https://lkml.kernel.org/r/20211116131112.508304-1-hdegoede@redhat.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reported-by:
-
David Hildenbrand authored
In commit cc5f2704 ("proc/vmcore: convert oldmem_pfn_is_ram callback to more generic vmcore callbacks"), we added detection of surprise vmcore_cb unregistration after the vmcore was already opened. Once detected, we warn the user and simulate reading zeroes from that point on when accessing the vmcore. The basic reason was that unexpected unregistration, for example, by manually unbinding a driver from a device after opening the vmcore, is not supported and could result in reading oldmem the vmcore_cb would have actually prohibited while registered. However, something like that can similarly be trigger by a user that's really looking for trouble simply by unbinding the relevant driver before opening the vmcore -- or by disallowing loading the driver in the first place. So it's actually of limited help. Currently, unregistration can only be triggered via virtio-mem when manually unbinding the driver from the device inside the VM; there is no way to trigger it from the hypervisor, as hypervisors don't allow for unplugging virtio-mem devices -- ripping out system RAM from a VM without coordination with the guest is usually not a good idea. The important part is that unbinding the driver and unregistering the vmcore_cb while concurrently reading the vmcore won't crash the system, and that is handled by the rwsem. To make the mechanism more future proof, let's remove the "read zero" part, but leave the warning in place. For example, we could have a future driver (like virtio-balloon) that will contact the hypervisor to figure out if we already populated a page for a given PFN. Hotunplugging such a device and consequently unregistering the vmcore_cb could be triggered from the hypervisor without harming the system even while kdump is running. In that case, we don't want to silently end up with a vmcore that contains wrong data, because the user inside the VM might be unaware of the hypervisor action and might easily miss the warning in the log. Link: https://lkml.kernel.org/r/20211111192243.22002-1-david@redhat.com Signed-off-by:
Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Philipp Rudo <prudo@redhat.com> Signed-off-by:
-
Kefeng Wang authored
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to populate pte, this patch adds a generic pcpu populate pte function, pcpu_populate_pte(), which is marked __weak and used on most architectures, but it is overridden on x86, which has its own implementation. Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lamete...
-
Kefeng Wang authored
With the previous patch, we could add a generic pcpu first chunk allocate and free function to cleanup the duplicated definations on each architecture. Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com Signed-off-by:
-
Kefeng Wang authored
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu first chunk allocation will call it to alloc memblock on the corresponding node by it, this is prepare for the next patch. Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com Signed-off-by:
-
Kefeng Wang authored
Patch series "mm: percpu: Cleanup percpu first chunk function". When supporting page mapping percpu first chunk allocator on arm64, we found there are lots of duplicated codes in percpu embed/page first chunk allocator. This patchset is aimed to cleanup them and should no function change. The currently supported status about 'embed' and 'page' in Archs shows below, embed: NEED_PER_CPU_PAGE_FIRST_CHUNK page: NEED_PER_CPU_EMBED_FIRST_CHUNK embed page ------------------------ arm64 Y Y mips Y N powerpc Y Y riscv Y N sparc Y Y x86 Y Y ------------------------ There are two interfaces about percpu first chunk allocator, extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size, size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); extern int __init pcpu_page_first_chunk(size_t reserved_size, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn); The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the pcpu_embed/page_first_chunk(). 1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be provided when archs supported NUMA. 2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too, a generic pcpu_populate_pte() which marked '__weak' is provided, if you need a different function to populate pte on the arch(like x86), please provide its own implementation. [1] https://github.com/kevin78/linux.git percpu-cleanup This patch (of 4): The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/ NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have duplicate definitions on platforms that subscribe it. Move them into mm, drop these redundant definitions and instead just select it on applicable platforms. Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by:
-
- Jan 09, 2022
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "A small fixup to the Zinitix touchscreen driver to avoid enabling the IRQ line before we successfully requested it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: zinitix - make sure the IRQ is allocated before it gets enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fix from Olof Johansson: "One more fix for 5.16 I had missed one patch when I sent up what I thought was the last batch of fixes for this release. This one fixes issues on the Raspberry Pi platforms due to gpio init changes this release, so hopefully we can get it merged before final release is cut" * tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: gpio-ranges property is now required
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'. - Avoid early exit in 'perf trace' due to running SIGCHLD handler before it makes sense to. It can happen when using a BPF source code event that have to be first built into an object file. * tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "libtraceevent: Increase libtraceevent logging when verbose" perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
-
Len Brown authored
This reverts commit f7d6779d. This bisected regression has impacted suspend-resume stability since 5.15-rc1. It regressed -stable via 5.14.10. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315 Fixes: f7d6779d ("drm/amdgpu: stop scheduler when calling hw_fini (v2)") Cc: Guchun Chen <guchun.chen@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Nikita Travkin authored
Since irq request is the last thing in the driver probe, it happens later than the input device registration. This means that there is a small time window where if the open method is called the driver will attempt to enable not yet available irq. Fix that by moving the irq request before the input device registration. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Fixes: 26822652 ("Input: add zinitix touchscreen driver") Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20220106072840.36851-2-nikita@trvn.ru Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- Jan 08, 2022
-
-
Phil Elwell authored
Since [1], added in 5.7, the absence of a gpio-ranges property has prevented GPIOs from being restored to inputs when released. Add those properties for BCM283x and BCM2711 devices. [1] commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges") Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Reported-by:
Jan Kiszka <jan.kiszka@web.de> Signed-off-by:
Phil Elwell <phil@raspberrypi.com> Acked-by:
Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few more fixes have come in, nothing overly severe but would be good to get in by final release: - More specific compatible fields on the qspi controller for socfpga, to enable quirks in the driver - A runtime PM fix for Renesas to fix mismatched reference counts on errors" * tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: socfpga: change qspi to "intel,socfpga-qspi" dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi" reset: renesas: Fix Runtime PM usage -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Fix the regression with AMD GPU suspend by reverting the handling of bus regulators in the I2C core. Also, there is a fix for the MPC driver to prevent an out-of-bound-access" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: core: support bus regulator controlling in adapter" i2c: mpc: Avoid out of bounds memory access
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply fixes from Sebastian Reichel: "Three fixes for the 5.16 cycle: - Avoid going beyond last capacity in the power-supply core - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation in LLVM resulting in a build failure - Fix ADC measurements in bq25890 charger driver" * tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: reset: ltc2952: Fix use of floating point literals power: bq25890: Enable continuous conversion for ADC at charging power: supply: core: Break capacity loop -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: - Make the old ALLOCSP ioctl behave in a consistent manner with newer syscalls like fallocate. * tag 'xfs-5.16-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: map unwritten blocks in XFS_IOC_{ALLOC,FREE}SP just like fallocate
-
