# PocketBeagle 2 PocketBeagle2 is based on [Texas Instrments AM6232 SoC](https://www.ti.com/product/AM623), it's dual A53 cores can provides better performance than the classic PocketBeagle. The new design comes with pre-soldered headers, 3-pin JST-SH 1.00mm uart debug port, USB-C port, MSPM0L1105, 512MB RAM, LiPo Battery charger, and optional eMMC storage.  ## Component location - Rev A | Front | Back | | :-------------------------: | :-------------------------: | |  | | ## Comparison table | Feature | PocketBeagle2 | PocketBeagle classic | | :---------------: | :-----------------: | :------------------------: | | SoC | AM6232 | AM3358 | | Arm CPU | Cortex-A53 (64-bit) | Cortex-A8 (32-bit) | | Arm cores | 2 x 1 GHz | 1 x 1GHz | | RAM | 512MB DDR4 | 512MB DDR3 | ## PocketBeagle2 Features and Specification | | Feature | | :---------------------: | :-------------------------------------------------------------------------------------------------------------------------------------: | | **Processor** | [Texas Instrments AM6232 SoC](https://www.ti.com/product/AM623) | | **SDRAM Memory** | 512MB DDR4 (Kingston D2516AN9EXGXN-TU) | | **PMIC** | TPS6521903 | | **Debug Support** | 3 pin 3.3V JST-SH 1.00mm UART debug port (RPI debug probe compatible) | | | 10-pin JTAG TAG-CONNECT footprint | | **Power Source** | USB C or Cape Header VIN (5V @ 1A) | | **PCB** | 55 x 35 mm | | **Indicators** | 1x Power, 1x Battery charging, and 4x User Controllable LEDs | | **SD/MMC Connector** | microSD (1.8/3.3V) | | **User Input** | 1. Power Button | | | 2. User/Boot Button | | **Weight** | 12.7gm |