- Oct 16, 2021
-
-
Dmitry Torokhov authored
We are using devm_input_allocate_device() that already sets parent of the input device, there is no need to do that again. Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/YWpiZqrfC9+GQsM4@google.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Randy Dunlap authored
Change the comment to a normal (non-kernel-doc) comment to avoid these kernel-doc warnings: max8925_onkey.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * MAX8925 ONKEY driver max8925_onkey.c:2: warning: missing initial short description on line: * MAX8925 ONKEY driver Fixes: 3734574c ("Input: enable onkey driver of max8925") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211002045943.9406-1-rdunlap@infradead.org Signed-off-by:
-
Dmitry Torokhov authored
When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by:
-
Dmitry Torokhov authored
Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by:
-
Dmitry Torokhov authored
Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by:
-
- Oct 15, 2021
-
-
Stephan Gerhold authored
At the moment the touch keys have key codes assigned from the device tree. In some cases, users might want to change the key code from userspace. There is existing functionality for this in the input core using the EVIOCSKEYCODE ioctl, which is integrated for example into udev. Make it possible to use this functionality for tm2-touchkey by simply making the input core aware of the array that holds the keycodes. Similar code also exists in mcs_touchkey and mpr121_touchkey. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-2-stephan@gerhold.net Signed-off-by:
-
Stephan Gerhold authored
Report the index of pressed touch key as MSC_SCAN code to userspace so it is possible to identify which of the keys was pressed (not just the function that is currently assigned to the key). This is done similarly also in mcs_touchkey and mpr121_touchkey. Signed-off-by:
-
Dmitry Torokhov authored
This fixes the following warning from sparse: CC [M] drivers/input/misc/adxl34x.o CHECK drivers/input/misc/adxl34x.c drivers/input/misc/adxl34x.c:245:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:248:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:251:29: warning: cast to restricted __le16 Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/YWZIjb91d6aAwgss@google.com Signed-off-by:
-
Dmitry Torokhov authored
By using managed resources (devm) we are able to streamline error handling in probe and remove most of the custom remove method. Acked-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/YWZGKWgdarGtvtYA@google.com Signed-off-by:
-
Dmitry Torokhov authored
Instead of manually toggling interrupt as wakeup source in suspend/resume methods, let's declare keypad interrupt and wakeup interrupt and leave the rest to the PM core. Acked-by:
-
Dmitry Torokhov authored
Also drop parenthesis around macros that do not use expressions as they are not needed. Acked-by:
-
Dmitry Torokhov authored
Instead of guarding suspend/resume methods with #ifdef CONFIG_PM let's mark them as __maybe_unused as this allows better compile coverage. Acked-by:
-
- Oct 12, 2021
-
-
Uwe Kleine-König authored
Up to now tsc200x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
Uwe Kleine-König authored
Up to now adxl34x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c and spi remove callbacks is ignored anyway. Signed-off-by:
-
- Oct 11, 2021
-
-
John Keeping authored
The device may take up to 100ms to become responsive during probe, so prefer asynchronous probing to avoid delaying the rest of the system. Suggested-by:
John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20211007111217.1935858-1-john@metanate.com Signed-off-by:
-
John Keeping authored
I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by:
-
- Oct 05, 2021
-
-
Lukas Bulwahn authored
Commit 04647773 ("dt-bindings: input: Convert ChipOne ICN8318 binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml, but missed to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.com Signed-off-by:
-
Arnd Bergmann authored
Overlapping input and output arguments to snprintf() are undefined behavior in C99: drivers/input/joystick/analog.c: In function 'analog_name': drivers/input/joystick/analog.c:428:3: error: 'snprintf' argument 4 overlaps destination object 'analog' [-Werror=restrict] 428 | snprintf(analog->name, sizeof(analog->name), "%s %d-hat", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 429 | analog->name, hweight16(analog->mask & ANALOG_HATS_ALL)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/input/joystick/analog.c:420:40: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 420 | static void analog_name(struct analog *analog) | ~~~~~~~~~~~~~~~^~~~~~ Change this function to use the simpler seq_buf interface instead. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210927101416.1569609-1-arnd@kernel.org Signed-off-by:
-
- Oct 02, 2021
-
-
Mark Brown authored
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210927134104.38648-1-broonie@kernel.org Signed-off-by:
-
- Sep 23, 2021
-
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922125954.533-1-caihuoqing@baidu.com Signed-off-by:
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
-
- Sep 21, 2021
-
-
Hans de Goede authored
Some Goodix touchscreen controllers, such as for example the GT912, don't have flash-storage for their firmware. These models require the OS to load the firmware at runtime, as well as some other special handling. Add support for this to the goodix driver. This patch was developed and tested on a Glavey TM800A550L tablet. Note the "goodix,main-clk" and "firmware-name" device-properties used by the new code are *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this properties for now is purely a kernel-internal thing and the name/working of the properties may still be changed for now. Reviewed-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-7-hdegoede@redhat.com Signed-off-by:
-
Hans de Goede authored
The config which needs to be send to the controller on some device-models is model-specific. Allow specifying a model-specific filename through a device-property, rather then always using a fixed filename. Note the "goodix,config-name" device-property used by this is *not* documented in the Documentation/devicetree/bindings/input/touchscreen/goodix.yaml device-tree bindings for now. Not documenting these is intentional. This is done because this code has only been tested on x86/ACPI so far, where devicetree is not used. Instead these properties are set through a software-fwnode attached to the device by the drivers/platform/x86/touchscreen_dmi.c code. This means that the use of this property for now is purely a kernel-internal thing and the name/working of the property may still be changed for now. Reviewed-by:
-
Hans de Goede authored
Make the goodix_i2c_read() and goodix_i2c_write*() helpers log errors themselves. This allows removing all the error logging from their callers. This already results in a nice cleanup with the current code and it also helps to make the upcoming support for controllers without flash cleaner. Reviewed-by:
-
Hans de Goede authored
Refactor reset handling a bit, change the main reset handler into a new goodix_reset_no_int_sync() helper and add a goodix_reset() wrapper which calls goodix_int_sync() separately. Also push the dev_err() call on reset failure into the goodix_reset_no_int_sync() and goodix_int_sync() functions, so that we don't need to have separate dev_err() calls in all their callers. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Reviewed-by:
-
Hans de Goede authored
Add a goodix.h header file, and move the register definitions, and struct declarations there and add prototypes for various helper functions. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Since MAINTAINERS needs updating because of this change anyways, also add myself as co-maintainer. Reviewed-by:
-
Hans de Goede authored
Change the type of the goodix_i2c_write() len parameter to from 'unsigned' to 'int' to avoid bare use of 'unsigned', changing it to 'int' makes goodix_i2c_write()' prototype consistent with goodix_i2c_read(). Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in the name of a joystick. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210920184748.18519-1-colin.king@canonical.com Signed-off-by:
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by:
Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210911112716.10067-1-len.baker@gmx.com Signed-off-by:
-
- Sep 10, 2021
-
-
Yassine Oudjana authored
Add a device tree binding for Cypress StreetFighter. Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210907174341.422013-3-y.oudjana@protonmail.com Signed-off-by:
-
Yassine Oudjana authored
This adds support for Cypress StreetFighter touchkey controllers such as sf3155. This driver supports managing regulators and generating input events. Due to lack of documentation, this driver is entirely based on information gathered from a driver written for an old Android kernel fork[1][2]. [1] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/drivers/input/touchscreen/cyttsp_button.c [2] https://github.com/LineageOS/android_kernel_xiaomi_msm8996/blob/lineage-18.1/arch/arm/boot/dts/qcom/a4-msm8996-mtp.dtsi#L291-L314 Signed-off-by:
-
Daniel Mack authored
This simplies the code a lot and fixes some potential resource leaks in the error return paths. Signed-off-by:
Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20210907200726.2034962-4-daniel@zonque.org Signed-off-by:
-
Daniel Mack authored
The functions in the platform data struct to initialize, cleanup and apply custom filters are not in use by any mainline board. Remove support for them to pave the road for more cleanups to come. The enum was moved as it has no users outside of the driver code itself. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210907200726.2034962-3-daniel@zonque.org Signed-off-by:
-
Daniel Mack authored
This will make the code a bit more terse. No functional change intended. Signed-off-by:
-
- Sep 05, 2021
-
-
Arvind Yadav authored
platform_get_irq() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
simba.hsu authored
Add support reading device ID when controller is in bootloader mode, which may happen if firmware update has been interrupted. Signed-off-by:
simba.hsu <simba.hsu@rad-ic.com> Link: https://lore.kernel.org/r/20210818063644.8654-1-simba.hsu@rad-ic.com Signed-off-by:
-
Tang Bin authored
The function cpcap_power_button_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802121740.8700-1-tangbin@cmss.chinamobile.com Signed-off-by:
-
- Sep 04, 2021
-
-
Geert Uytterhoeven authored
As the ADC ladder input driver does not have any code or data located in initmem, there is no need to annotate the adc_keys_driver structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/7091e8213602be64826fd689a7337246d218f3b1.1626255421.git.geert+renesas@glider.be Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by:
-
