Newer
Older
* https://beagley-ai.org/
* Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
* Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation
*/
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-j722s.dtsi"
#include "k3-am67a-beagley-ai-pinmux.dtsi"
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mux/ti-serdes.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pwm/pwm.h>
/ {
compatible = "beagle,am67a-beagley-ai", "ti,j722s";
model = "BeagleBoard.org BeagleY-AI";
aliases {
serial0 = &wkup_uart0;
serial2 = &main_uart0;
serial3 = &main_uart1;
mmc1 = &sdhci1;
usb0 = &usb0;
usb1 = &usb1;
};
chosen {
stdout-path = &main_uart0;
};
memory@80000000 {
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
device_type = "memory";
bootph-pre-ram;
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global cma region */
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0x00 0x38000000>;
linux,cma-default;
};
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
no-map;
};
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>;
no-map;
};
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x100000>;
no-map;
};
wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0100000 0x00 0xf00000>;
no-map;
};
mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1000000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa1100000 0x00 0xf00000>;
no-map;
};
main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2000000 0x00 0x100000>;
no-map;
};
main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa2100000 0x00 0xf00000>;
no-map;
};
c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3000000 0x00 0x100000>;
no-map;
};
c7x_0_memory_region: c7x-memory@a3100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa3100000 0x00 0xf00000>;
no-map;
};
c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4000000 0x00 0x100000>;
no-map;
};
c7x_1_memory_region: c7x-memory@a4100000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa4100000 0x00 0xf00000>;
no-map;
};
rtos_ipc_memory_region: ipc-memories@a5000000 {
reg = <0x00 0xa5000000 0x00 0x1c00000>;
alignment = <0x1000>;
no-map;
};
};
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vsys_5v0>;
regulator-always-on;
regulator-boot-on;
};
wlan_en: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "wlan_en";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
/* regulator-always-on; */
regulator-off-in-suspend;
vin-supply = <&vdd_3v3>;
gpio = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_pins_default>;
};
vdd_mmc1: regulator-mmc1 {
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
pinctrl-names = "default";
pinctrl-0 = <&vdd_3v3_sd_pins_default>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
bootph-all;
};
vdd_sd_dv: regulator-TLV71033 {
compatible = "regulator-gpio";
regulator-name = "tlv71033";
pinctrl-names = "default";
pinctrl-0 = <&vdd_sd_dv_pins_default>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
vin-supply = <&vsys_5v0>;
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
states = <1800000 0x0>,
<3300000 0x1>;
};
vsys_io_1v8: regulator-vsys-io-1v8 {
compatible = "regulator-fixed";
regulator-name = "vsys_io_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vsys_io_1v2: regulator-vsys-io-1v2 {
compatible = "regulator-fixed";
regulator-name = "vsys_io_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_default>;
led-0 {
// red PWR
label = "PWR";
gpios = <&main_gpio0 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
default-state = "off";
};
led-1 {
// Green ACT
gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_HEARTBEAT;
linux,default-trigger = "heartbeat";
};
};
hdmi0: connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
type = "d";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&it66122_out>;
sound0: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "it66122 HDMI";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
simple-audio-card,frame-master = <&hdmi_dailink_master>;
hdmi_dailink_master: simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&it66122>;
fan: cooling_fan {
compatible = "pwm-fan";
pinctrl-names = "default";
pinctrl-0 = <&pwm_fan_pins>;
fan-supply = <&vsys_5v0>;
#cooling-cells = <2>;
cooling-min-state = <0>;
cooling-max-state = <3>;
cooling-levels = <0 75 125 175 250>;
pwms = <&epwm2 0 40000 0>;
pulses-per-revolution = <2>;
interrupt-parent = <&main_gpio1>;
interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
status = "okay";
};
mipi_switch: mipi-switch {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&mipi_switch_pins>;
oe-pin {
label = "MIPI_SWITCH_OE";
gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
sel-pin {
label = "MIPI_SWITCH_SEL";
gpios = <&main_gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
spi_gpio: spi {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
pinctrl-names = "default";
pinctrl-0 = <&spi_gpio_default_pins>;
sck-gpios = <&mcu_gpio0 2 GPIO_ACTIVE_HIGH>;
miso-gpios = <&mcu_gpio0 4 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&mcu_gpio0 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <2>;
cs-gpios = <
&mcu_gpio0 0 GPIO_ACTIVE_HIGH
&mcu_gpio0 9 GPIO_ACTIVE_HIGH
>;
status = "disabled";
};
};
&main_pmx0 {
bootph-all;
main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */
J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */
>;
bootph-all;
};
main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
>;
bootph-all;
};
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01ac, PIN_INPUT, 2) /* (C27) MCASP0_AFSR.UART1_RXD */
J722S_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (F24) MCASP0_ACLKR.UART1_TXD */
>;
bootph-all;
vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */
>;
bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */
J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */
J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */
J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */
J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */
J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD.GPIO1_48 */
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
>;
bootph-all;
};
ospi0_pins_default: ospi0-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */
J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */
J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */
J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */
J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */
J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */
J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */
J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */
J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */
J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */
J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */
>;
bootph-all;
};
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
J722S_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A22) I2C1_SDA */
>;
bootph-all;
};
main_i2c2_pins_default: main-i2c2-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
J722S_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
>;
};
main_dpi_pins_default: main-dpi-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AB23) VOUT0_VSYNC */
J722S_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
J722S_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC26) VOUT0_PCLK */
J722S_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (AC27) VOUT0_DE */
J722S_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (W27) VOUT0_DATA0 */
J722S_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA1 */
J722S_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA2 */
J722S_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W23) VOUT0_DATA3 */
J722S_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA4 */
J722S_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA5 */
J722S_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y26) VOUT0_DATA6 */
J722S_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (Y27) VOUT0_DATA7 */
J722S_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA8 */
J722S_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (AA27) VOUT0_DATA9 */
J722S_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA10 */
J722S_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA11 */
J722S_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA12 */
J722S_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA22) VOUT0_DATA13 */
J722S_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (AB26) VOUT0_DATA14 */
J722S_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AB27) VOUT0_DATA15 */
J722S_IOPAD(0x005c, PIN_OUTPUT, 1) /* (AC25) GPMC0_AD8.VOUT0_DATA16 */
J722S_IOPAD(0x0060, PIN_OUTPUT, 1) /* (U26) GPMC0_AD9.VOUT0_DATA17 */
J722S_IOPAD(0x0064, PIN_OUTPUT, 1) /* (V27) GPMC0_AD10.VOUT0_DATA18 */
J722S_IOPAD(0x0068, PIN_OUTPUT, 1) /* (V25) GPMC0_AD11.VOUT0_DATA19 */
J722S_IOPAD(0x006c, PIN_OUTPUT, 1) /* (V26) GPMC0_AD12.VOUT0_DATA20 */
J722S_IOPAD(0x0070, PIN_OUTPUT, 1) /* (V24) GPMC0_AD13.VOUT0_DATA21 */
J722S_IOPAD(0x0074, PIN_OUTPUT, 1) /* (V22) GPMC0_AD14.VOUT0_DATA22 */
J722S_IOPAD(0x0078, PIN_OUTPUT, 1) /* (V23) GPMC0_AD15.VOUT0_DATA23 */
>;
};
main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0110, PIN_INPUT, 7) /* (G27) MMC2_DAT1.GPIO0_67 */
>;
};
mdio_pins_default: mdio-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
>;
};
rgmii1_pins_default: rgmii1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */
J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */
J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */
J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */
J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */
J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */
J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */
J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */
J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
>;
};
led_pins_default: led-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x002c, PIN_OUTPUT, 7) /* (K26) OSPI0_CSn0.GPIO0_11 */
J722S_IOPAD(0x0030, PIN_OUTPUT, 7) /* (K23) OSPI0_CSn1.GPIO0_12 */
>;
};
vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */
>;
};
main_usb1_pins_default: main-usb1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0258, PIN_INPUT, 0) /* (B27) USB1_DRVVBUS */
>;
};
pmic_irq_pins_default: pmic-irq-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */
>;
};
wifi_pins_default: wifi-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0120, PIN_INPUT, 0) /* (F27) MMC2_CMD */
J722S_IOPAD(0x0118, PIN_OUTPUT, 0) /* (H26) MMC2_CLK */
J722S_IOPAD(0x011C, PIN_INPUT, 0) /* () MMC2_CLKLB */
J722S_IOPAD(0x0114, PIN_INPUT, 0) /* (G26) MMC2_DAT0 */
J722S_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (G27) MMC2_DAT1 */
J722S_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (H27) MMC2_DAT2 */
J722S_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (J27) MMC2_DAT3 */
>;
};
wifi_en_pins_default: wifi-en-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0010, PIN_OUTPUT, 7) /* (L27) OSPI0_D1.GPIO0_4 */
>;
};
wifi_wlirq_pins_default: wifi-wlirq-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0014, PIN_INPUT, 7) /* (L26) OSPI0_D2.GPIO0_5 */
>;
};
pwm_fan_pins: pwm-fan-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0124, PIN_OUTPUT, 4) /* (F26) MMC2_SDCD.EHRPWM2_A FAN_PWM */
J722S_IOPAD(0x01d0, PIN_INPUT, 7) /* (E22) UART0_CTSn.GPIO1_22 FAN_TACH */
>;
};
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
dss0_pins_default: dss0-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AB23) VOUT0_VSYNC */
J722S_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
J722S_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC26) VOUT0_PCLK */
J722S_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (AC27) VOUT0_DE */
J722S_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (W27) VOUT0_DATA0 */
J722S_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA1 */
J722S_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA2 */
J722S_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W23) VOUT0_DATA3 */
J722S_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA4 */
J722S_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA5 */
J722S_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y26) VOUT0_DATA6 */
J722S_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (Y27) VOUT0_DATA7 */
J722S_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA8 */
J722S_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (AA27) VOUT0_DATA9 */
J722S_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA10 */
J722S_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA11 */
J722S_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA12 */
J722S_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA22) VOUT0_DATA13 */
J722S_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (AB26) VOUT0_DATA14 */
J722S_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AB27) VOUT0_DATA15 */
J722S_IOPAD(0x005c, PIN_OUTPUT, 1) /* (U27) GPMC0_AD8.VOUT0_DATA16 */
J722S_IOPAD(0x0060, PIN_OUTPUT, 1) /* (U26) GPMC0_AD9.VOUT0_DATA17 */
J722S_IOPAD(0x0064, PIN_OUTPUT, 1) /* (V27) GPMC0_AD10.VOUT0_DATA18 */
J722S_IOPAD(0x0068, PIN_OUTPUT, 1) /* (V25) GPMC0_AD11.VOUT0_DATA19 */
J722S_IOPAD(0x006c, PIN_OUTPUT, 1) /* (V26) GPMC0_AD12.VOUT0_DATA20 */
J722S_IOPAD(0x0070, PIN_OUTPUT, 1) /* (V24) GPMC0_AD13.VOUT0_DATA21 */
J722S_IOPAD(0x0074, PIN_OUTPUT, 1) /* (V22) GPMC0_AD14.VOUT0_DATA22 */
J722S_IOPAD(0x0078, PIN_OUTPUT, 1) /* (V23) GPMC0_AD15.VOUT0_DATA23 */
>;
};
csi1_gpio_pins_default: csi1-gpio-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01d8, PIN_OUTPUT, 7) /* (D22) MCAN0_TX.GPIO1_24 */
>;
};
usb_hub: usb-hub-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0084, PIN_OUTPUT, 7) /* (N21) GPMC0_ADVn_ALE.GPIO0_32 */
>;
};
mipi_switch_pins: mipi-switch-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0004, PIN_OUTPUT, 7) /* (L23) OSPI0_LBCLKO.GPIO0_1 */
J722S_IOPAD(0x0008, PIN_OUTPUT, 7) /* (L22) OSPI0_DQS.GPIO0_2 */
>;
};
main_uart6_pins_default: main-uart6-default-pins {
Robert Nelson
committed
pinctrl-single,pins = <
J722S_IOPAD(0x0028, PIN_INPUT, 3) /* (M27) OSPI0_D7.UART6_CTSn */
J722S_IOPAD(0x0024, PIN_OUTPUT, 3) /* (N27) OSPI0_D6.UART6_RTSn */
J722S_IOPAD(0x001c, PIN_INPUT, 3) /* (L21) OSPI0_D4.UART6_RXD */
J722S_IOPAD(0x0020, PIN_OUTPUT, 3) /* (M26) OSPI0_D5.UART6_TXD */
>;
};
main_oldi_backlight_default_pins: main-backlight-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x01f0, PIN_OUTPUT, 8) /* (A23) EXT_REFCLK1.ECAP0_IN_APWM_OUT */
>;
};
main_oldi_touchscreen_default_pins: main-touchscreen-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0038, PIN_INPUT, 7) /* (J22) OSPI0_CSn3.GPIO0_14 */
>;
};
main_mcasp1_pins_default: main-mcasp1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x0090, PIN_INPUT, 2) /* (P27) GPMC0_BE0n_CLE.MCASP1_ACLKX */
J722S_IOPAD(0x0098, PIN_INPUT, 2) /* (V21) GPMC0_WAIT0.MCASP1_AFSX */
J722S_IOPAD(0x008c, PIN_INPUT, 2) /* (N23) GPMC0_WEn.MCASP1_AXR0 */
>;
};
};
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
&cpsw3g {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>;
assigned-clocks = <&k3_clks 227 0>;
assigned-clock-parents = <&k3_clks 227 6>;
};
&cpsw3g_mdio {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins_default>;
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
};
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
};
&cpsw_port2 {
status = "disabled";
};
&epwm2 {
status = "okay";
};
&main_gpio0 {
status = "okay";
pinctrl-names = "default";
gpio-line-names = "", "", "", "", "", /* 0-4 */
"", "", "", "", "", /* 5-9 */
"", "", "", "", "", /* 10-14 */
"", "", "", "", "", /* 15-19 */
"", "", "", "", "", /* 20-24 */
"", "", "", "", "", /* 25-29 */
"", "", "USB_RST", "GPIO27", "", /* 30-34 */
"", "GPIO26", "", "GPIO4", "", /* 35-39 */
"", "GPIO22", "GPIO25", "", ""; /* 40-44 */
&main_gpio1 {
status = "okay";
pinctrl-names = "default";
gpio-line-names = "", "", "", "", "", /* 0-4 */
"", "", "GPIO16", "GPIO17", "GPIO21", /* 5-9 */
"GPIO20", "GPIO18", "GPIO19", "GPIO15", "GPIO14", /* 10-14 */
"GPIO5", "GPIO12", "GPIO6", "GPIO13", ""; /* 15-19 */
};
&mcu_gpio0 {
status = "okay";
pinctrl-names = "default";
gpio-line-names = "GPIO8", "", "GPIO11", "GPIO10", "GPIO9", /* 0-4 */
"", "", "GPIO23", "", "GPIO7", /* 5-9 */
"GPIO24", "", "", "HDMI_RSTn", "HDMI_INTn", /* 10-14 */
"", "", "GPIO3", "GPIO2", ""; /* 15-19 */
};
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
status = "okay";
bootph-all;
};
//pinctrl-names = "default";
//pinctrl-0 = <&main_uart1_pins_default>;
status = "okay";
bootph-all;
};
symlink = "board/bluetooth/uart";
pinctrl-names = "default";
pinctrl-0 = <&main_uart6_pins_default>;
status = "okay";
bootph-all;
bluetooth {
cc33xx-supply = <&wlan_en>;
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
&main0_thermal {
trips {
main0_active0: trip-active0 {
temperature = <40000>;
hysteresis = <5000>;
type = "active";
};
main0_active1: trip-active1 {
temperature = <48000>;
hysteresis = <3000>;
type = "active";
};
main0_active2: trip-active2 {
temperature = <60000>;
hysteresis = <10000>;
type = "active";
};
};
cooling-maps {
map1 {
trip = <&main0_active0>;
cooling-device = <&fan 1 1>;
};
map2 {
trip = <&main0_active1>;
cooling-device = <&fan 2 2>;
};
map3 {
trip = <&main0_active2>;
cooling-device = <&fan 3 3>;
};
};
};
&mcu_pmx0 {
bootph-all;
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */
J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */
J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */
J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */
>;
bootph-all;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */
J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */
>;
bootph-all;
};
wifi_32k_clk: mcu-clk-out-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F12) WKUP_CLKOUT0 */
>;
};
hdmi_gpio_pins_default: hdmi-gpio-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x0038, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (D8) MCU_MCAN0_RX.MCU_GPIO0_14 HDMI_INTn */
J722S_MCU_IOPAD(0x0034, PIN_OUTPUT_PULLUP, 7) /* (B2) MCU_MCAN0_TX.MCU_GPIO0_13 HDMI_RSTn */
>;
};
pcie_pins_default: pcie-default-pins {
J722S_MCU_IOPAD(0x0018, PIN_OUTPUT, 7) /* (B4) MCU_UART0_TXD.MCU_GPIO0_6 */
J722S_MCU_IOPAD(0x0014, PIN_INPUT, 7) /* (B8) MCU_UART0_RXD.MCU_GPIO0_5 */ /* PCIE_DET_WAKE */
J722S_MCU_IOPAD(0x0020, PIN_OUTPUT, 7) /* (C5) MCU_UART0_RTSn.MCU_GPIO0_8 */ /* PCIE_PWR_EN */
Robert Nelson
committed
csi0_gpio_pins_default: csi0-gpio-default-pins {
Robert Nelson
committed
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x003c, PIN_OUTPUT, 7) /* (C1) MCU_MCAN1_TX.MCU_GPIO0_15 */
>;
};
mcu_i2c0_pins_default: mcu-i2c0-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (B13) MCU_I2C0_SCL */
J722S_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SDA */
mcu_oldi_backlight_default_pins: mcu-backlight-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x002c, PIN_OUTPUT, 7) /* (C4) WKUP_UART0_CTSn.MCU_GPIO0_11 */
>;
};
mcu_oldi_touchscreen_default_pins: mcu-touchscreen-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x0030, PIN_OUTPUT, 7) /* (C3) WKUP_UART0_RTSn.MCU_GPIO0_12 */
>;
};
gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */
>;
};
spi_gpio_default_pins: spi-gpio-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x000, PIN_OUTPUT, 7) /* (C12) MCU_SPI0_CS0.MCU_GPIO0_0 SS 0 */
J722S_MCU_IOPAD(0x024, PIN_OUTPUT, 7) /* (B3) WKUP_UART0_RXD.MCU_GPIO0_9 SS 1 */
J722S_MCU_IOPAD(0x008, PIN_OUTPUT, 7) /* (A9) MCU_SPI0_CLK.MCU_GPIO0_2 SCLK */
J722S_MCU_IOPAD(0x010, PIN_INPUT, 7) /* (C11) MCU_SPI0_D1.MCU_GPIO0_4 MISO */
J722S_MCU_IOPAD(0x00C, PIN_OUTPUT, 7) /* (B12) MCU_SPI0_D0.MCU_GPIO0_3 MOSI */
>;
};
};
&wkup_uart0 {
/* WKUP UART0 is used by Device Manager firmware */
pinctrl-names = "default";
pinctrl-0 = <&wkup_uart0_pins_default>;
status = "reserved";
bootph-all;
};
&mcu_i2c0 {
symlink = "hat/mcu_i2c0";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_i2c0_pins_default>;
clock-frequency = <100000>;
&wkup_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
Jared McArthur
committed
clock-frequency = <100000>;
status = "okay";
bootph-all;
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
tps65219: pmic@30 {
bootph-all;
compatible = "ti,tps65219";
reg = <0x30>;
buck1-supply = <&vsys_5v0>;
buck2-supply = <&vsys_5v0>;
buck3-supply = <&vsys_5v0>;
ldo1-supply = <&vdd_3v3>;
ldo3-supply = <&vdd_3v3>;
ldo4-supply = <&vdd_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
system-power-controller;
ti,power-button;
regulators {
buck1_reg: buck1 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck2_reg: buck2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: ldo1 {
regulator-name = "VDDSHV5_SDIO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-allow-bypass;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ldo3 {
regulator-name = "VDDA_PHY_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ldo4 {
regulator-name = "VDDA_PLL_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
rtc: rtc@68 {
compatible = "dallas,ds1340";
reg = <0x68>;
};
};
dsi0_csi1_i2c: &main_i2c0 {
symlink = "hat/dsi0_csi1_i2c";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
bootph-all;
};
&main_i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <100000>;
bootph-all;
it66122: bridge-hdmi@4c {
compatible = "ite,it66122";
Robert Nelson
committed
reg = <0x4c>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_gpio_pins_default>;
vcn33-supply = <&vdd_3v3>;
vcn18-supply = <&buck2_reg>;
vrf12-supply = <&ldo2_reg>;
reset-gpios = <&mcu_gpio0 13 GPIO_ACTIVE_LOW>;
interrupt-parent = <&mcu_gpio0>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
#sound-dai-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
/*
* HDMI can be serviced with 3 potential VPs -
* (DSS0 VP1 / DSS1 VP0 / DSS1 VP1).
* For now, we will service it with DSS0 VP1.
*/
port@0 {
reg = <0>;
it66122_in: endpoint {
Robert Nelson
committed
bus-width = <24>;
remote-endpoint = <&dss1_dpi0_out>;
};
};
port@1 {
reg = <1>;
it66122_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
csi0_i2c: &main_i2c2 {
symlink = "hat/csi0";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
status = "okay";