- May 18, 2022
-
-
Marek Vasut authored
Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its parameter from struct device * to struct gpio_desc *, and use it as one single consistent reset implementation all over the driver. Also increase the minimum reset duration to 12ms, to make sure the reset is really within the spec. Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30 "2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum 10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset timings such that T4 is 12ms and T2 is 160ms to fit those figures. This prevents sporadic touch controller start up failures when some systems with at least ILI251x controller boot, without this patch the systems sometimes fail to communicate with the touch controller. Fixes: 201f3c80 ("Input: ili210x - add reset GPIO support") Signed-off-by:
-
- Apr 25, 2022
-
-
Mattijs Korpershoek authoredFengping has no longer interest and time to maintain this driver so he agreed to transfer maintainership over to me. Signed-off-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220421140255.2781505-1-mkorpershoek@baylibre.com Signed-off-by:
-
- Apr 17, 2022
-
-
Shelby Heffron authored
Add keycodes that are used by marine navigation devices. Signed-off-by:
Shelby Heffron <Shelby.Heffron@garmin.com> Link: https://lore.kernel.org/r/20220414015356.1619310-1-Shelby.Heffron@garmin.com Signed-off-by:
-
Miaoqian Lin authored
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com Signed-off-by:
-
- Apr 08, 2022
-
-
Zheyu Ma authored
When the driver fails to probe, we will get the following splat: [ 19.311970] ------------[ cut here ]------------ [ 19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 19.328831] Call Trace: [ 19.329112] <TASK> [ 19.329369] regulator_bulk_free+0x82/0xe0 [ 19.329860] devres_release_group+0x319/0x3d0 [ 19.330357] i2c_device_probe+0x766/0x940 Fix this by adding a callback that will deal with the disabling when the driver fails to probe. Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.com Signed-off-by:
-
- Apr 01, 2022
-
-
José Expósito authored
This reverts commit 37ef4c19. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Peter Hutterer <peter.hutterer@who-t.net> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by:
-
- Mar 31, 2022
-
-
Dmitry Torokhov authored
Prepare input updates for 5.18 merge window.
-
- Mar 21, 2022
-
-
Colin Ian King authored
Variable z is being assigned a value that is never read, the variable is redundant and can be removed. Cleans up clang scan build warning: drivers/input/joystick/adi.c:139:6: warning: Although the value stored to 'z' is used in the enclosing expression, the value is never actually read from 'z' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220318002318.80519-1-colin.i.king@gmail.com Signed-off-by:
-
Markuss Broks authored
Add support for the IST3038C touchscreen IC from Imagis, based on downstream driver. The driver supports multi-touch (10 touch points) The IST3038C IC supports touch keys, but the support isn't added because the touch screen used for testing doesn't utilize touch keys. Looking at the downstream driver, it is possible to add support for other Imagis ICs of IST30**C series. Reviewed-by:
Jeff LaBundy <jeff@labundy.com> Signed-off-by:
Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.com Signed-off-by:
-
Markuss Broks authored
This patch adds device-tree bindings for the Imagis IST3038C touch screen IC. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Matthew Haughton authored
Confirmed LEN2064 on my P14s works with psmouse.synaptics_intertouch=1 By all accounts T14 and P14s are the same hardware which only differ by model identifier. Signed-off-by:
Matthew Haughton <snafu109@gmail.com> Link: https://lore.kernel.org/r/20220318113949.32722-1-snafu109@gmail.com Signed-off-by:
-
Zheng Yongjun authored
pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com Signed-off-by:
-
Jeff LaBundy authored
Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by:
Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by:
-
Jeff LaBundy authored
Both iqs5xx_axis_init() and iqs5xx_irq() already define a local input_dev pointer 'input'. Use this instead of iqs5xx->input so as to make the code a bit smaller. Signed-off-by:
-
- Mar 15, 2022
-
-
Zhengqiao Xia authored
If HID_GROUP of eel is set to HID_GROUP_GENERIC, Whiskers Tablet Mode Switch of eel hammer will not be detected by system because the hid-vivaldi driver probes the device. When it is set to HID_GROUP_VIVALDI, system will detect Whiskers Tablet Mode Switch successfully and also support the vivaldi keyboard layout. Tested-by:
"Sean O'Brien" <seobrien@chromium.org> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> [swboyd@chromium.org: Expand on commit text] Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler Link: https://lore.kernel.org/r/20220228075446.466016-6-dmitry.torokhov@gmail.com Signed-off-by:
-
Stephen Boyd authored
Add support to the hammer driver to parse vivaldi keyboard layouts and expose them to userspace. This allows hammer devices to use vivaldi function row keys while also supporting the other features this driver supports, like the CBAS (chrome base attached switch) and a keyboard backlight. Signed-off-by:
-
Stephen Boyd authored
We need to support parsing the HID device in both the Vivaldi and the Hammer drivers so that we can properly expose the function row physmap to userspace when a hammer device uses a vivaldi keyboard layout for the function row keys. Extract the feature mapping logic from the vivaldi driver into an hid specific vivaldi library so we can use it from both HID drivers. To allow more code sharing we mandate that vivaldi data must be placed at the very beginning of the driver data attached to the HID device instance. Signed-off-by:
-
Stephen Boyd authored
Let's introduce a common library file for the physmap show function duplicated between three different keyboard drivers. This largely copies the code from cros_ec_keyb.c which has the most recent version of the show function, while using the vivaldi_data struct from the hid-vivaldi driver. This saves a small amount of space in an allyesconfig build. $ ./scripts/bloat-o-meter vmlinux.before vmlinux.after add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308) Function old new delta vivaldi_function_row_physmap_show - 292 +292 _sub_I_65535_1 1057564 1057616 +52 _sub_D_65535_0 1057564 1057616 +52 e843419@49f2_00062737_9b04 - 8 +8 e843419@20f6_0002a34d_35bc - 8 +8 atkbd_parse_fwnode_data 480 472 -8 atkbd_do_show_function_row_physmap 316 76 -240 function_row_physmap_show 620 148 -472 Total: Before=285581925, After=285581617, chg -0.00% Signed-off-by:
-
Dmitry Torokhov authored
We can use devm to register keyboard backlight LED on hammer devices, this will allow us to use HID's driver data for something else later. Link: https://lore.kernel.org/r/20220228075446.466016-2-dmitry.torokhov@gmail.com Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler Signed-off-by:
-
- Mar 14, 2022
-
-
Dmitry Torokhov authored
Sync up with mainline to again get the latest changes in HID subsystem.
-
Pavel Skripkin authored
Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2b ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by:
<syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by:
-
Lv Ruyi (CGEL ZTE) authored
The irq variable is defined as unsigned int. If the platform_get_irq() returns a negative value, data type cast may result in error. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn> Reviewed-by:
-
- Mar 13, 2022
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Free shmem backing storage for SGX enclave pages when those are swapped back into EPC memory - Prevent do_int3() from being kprobed, to avoid recursion - Remap setup_data and setup_indirect structures properly when accessing their members - Correct the alternatives patching order for modules too * tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Free backing memory after faulting the enclave page x86/traps: Mark do_int3() NOKPROBE_SYMBOL x86/boot: Add setup_indirect support in early_memremap_is_setup_data() x86/boot: Fix memremap of setup_indirect structures x86/module: Fix the paravirt vs alternative order
-
- Mar 12, 2022
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix event parser error for hybrid systems - Fix NULL check against wrong variable in 'perf bench' and in the parsing code - Update arm64 KVM headers from the kernel sources - Sync cpufeatures header with the kernel sources * tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf parse: Fix event parser error for hybrid systems perf bench: Fix NULL check against wrong variable perf parse-events: Fix NULL check against wrong variable tools headers cpufeatures: Sync with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm kconfig fix from Dave Airlie: "Thorsten pointed out this had fallen down the cracks and was in -next only, I've picked it out, fixed up it's Fixes: line. - fix regression in Kconfig" * tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm: drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
-
Zhengjun Xing authored
This bug happened on hybrid systems when both cpu_core and cpu_atom have the same event name such as "UOPS_RETIRED.MS" while their event terms are different, then during perf stat, the event for cpu_atom will parse fail and then no output for cpu_atom. UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ It is because event terms in the "head" of parse_events_multi_pmu_add will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS for cpu_core, then when parsing the same event for cpu_atom, it still uses the event terms for cpu_core, but event terms for cpu_atom are different with cpu_core, the event parses for cpu_atom will fail. This patch fixes it, the event terms should be parsed from the original event. This patch can work for the hybrid systems that have the same event in more than 2 PMUs. It also can work in non-hybrid systems. Before: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ Control descriptor is not initialized UOPS_RETIRED.MS: 2737845 16068518485 16068518485 Performance counter stats for 'system wide': 2,737,845 cpu_core/UOPS_RETIRED.MS/ 1.002553850 seconds time elapsed After: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ Control descriptor is not initialized UOPS_RETIRED.MS: 1977555 16076950711 16076950711 UOPS_RETIRED.MS: 568684 8038694234 8038694234 Performance counter stats for 'system wide': 1,977,555 cpu_core/UOPS_RETIRED.MS/ 568,684 cpu_atom/UOPS_RETIRED.MS/ 1.004758259 seconds time elapsed Fixes: fb081153 ("perf parse-events: Allow config on kernel PMU events") Reviewed-by:Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220307151627.30049-1-zhengjun.xing@linux.intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Weiguo Li authored
We did a NULL check after "epollfdp = calloc(...)", but we checked "epollfd" instead of "epollfdp". Signed-off-by:
Weiguo Li <liwg06@foxmail.com> Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.com Signed-off-by:
-
Weiguo Li authored
We did a null check after "tmp->symbol = strdup(...)", but we checked "list->symbol" other than "tmp->symbol". Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: d45476d9 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE") Its just a comment fixup. This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Borislav Petkov <bp@suse.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.org Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: a5905d6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") That don't causes any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.org Signed-off-by:
-
Thomas Zimmermann authored
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select the option to fix the build failure. The error message is shown below. arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to `drm_panel_dp_aux_backlight' make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1 The issue has been reported before, when DisplayPort helpers were hidden behind the option CONFIG_DRM_KMS_HELPER. [2] v2: * fix and expand commit description (Arnd) Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Fixes: 9d6366e7 ("drm: fb_helper: improve CONFIG_FB dependency") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1] Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2] Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- Mar 11, 2022
-
-
Randy Dunlap authored
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references to spectre_v2_update_state() cause a build error, so provide an empty stub for that function when the Kconfig option is not set. Fixes this build error: arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init': proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state' arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state' Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: patches@armlinux.org.uk Acked-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - prevent users from enabling the alternatives framework (and thus errata handling) on XIP kernels, where runtime code patching does not function correctly. - properly detect offset overflow for AUIPC-based relocations in modules. This may manifest as modules calling arbitrary invalid addresses, depending on the address allocated when a module is loaded. * tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix auipc+jalr relocation range checks riscv: alternative only works on !XIP_KERNEL
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "Fix STACKTRACE=n build, in particular for skiroot_defconfig" * tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix STACKTRACE=n build
-
Russell King (Oracle) authored
When building for Thumb2, the vectors make use of a local label. Sadly, the Spectre BHB code also uses a local label with the same number which results in the Thumb2 reference pointing at the wrong place. Fix this by changing the number used for the Spectre BHB local label. Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround") Tested-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Restore (mostly) the busy polling for MMC_SEND_OP_COND MMC host: - meson-gx: Fix DMA usage of meson_mmc_post_req()" * tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND mmc: meson: Fix usage of meson_mmc_post_req()
-
Jarkko Sakkinen authored
There is a limited amount of SGX memory (EPC) on each system. When that memory is used up, SGX has its own swapping mechanism which is similar in concept but totally separate from the core mm/* code. Instead of swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM comes from a shared memory pseudo-file and can itself be swapped by the core mm code. There is a hierarchy like this: EPC <-> shmem <-> disk After data is swapped back in from shmem to EPC, the shmem backing storage needs to be freed. Currently, the backing shmem is not freed. This effectively wastes the shmem while the enclave is running. The memory is recovered when the enclave is destroyed and the backing storage freed. Sort this out by freeing memory with shmem_truncate_range(), as soon as a page is faulted back to the EPC. In addition, free the memory for PCMD pages as soon as all PCMD's in a page have been marked as unused by zeroing its contents. Cc: stable@vger.kernel.org Fixes: 1728ab54 ("x86/sgx: Add a page reclaimer") Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from David Howells: "A set of patches for watch_queue filter issues noted by Jann. I've added in a cleanup patch from Christophe Jaillet to convert to using formal bitmap specifiers for the note allocation bitmap. Also two filesystem fixes (afs and cachefiles)" * emailed patches from David Howells <dhowells@redhat.com>: cachefiles: Fix volume coherency attribute afs: Fix potential thrashing in afs writeback watch_queue: Make comment about setting ->defunct more accurate watch_queue: Fix lack of barrier/sync/lock between post and read watch_queue: Free the alloc bitmap when the watch_queue is torn down watch_queue: Fix the alloc bitmap size to reflect notes allocated watch_queue: Use the bitmap API when applicable watch_queue: Fix to always request a pow-of-2 pipe ring size watch_queue: Fix to release page in ->release() watch_queue, pipe: Free watchqueue state after clearing pipe ring watch_queue: Fix filter limit check
-
