- Oct 19, 2020
-
-
Dave Airlie authored
In all 3 drivers there is a case where the driver knows the bo is in SYSTEM so don't call the api that checks that. Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019071314.1671485-4-airlied@gmail.com
-
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
This factors out the code to setup non-system tt. The same code was used twice in the move paths. Reviewed-by:
-
Neil Armstrong authored
This adds support for the TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com
-
Neil Armstrong authored
This add the bindings for the 1024x600 TFT LCD TL070WSH30 DSI panel to panel-simple-dsi. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-4-narmstrong@baylibre.com
-
Neil Armstrong authored
Simple DSI panels can also have a reset GPIO signal in addition/instead of an enable GPIO signal. This adds an optional reset-gpios property. Signed-off-by:
-
Neil Armstrong authored
Shanghai Top Display Optolelectronics Co., Ltd is a display manufacturer from Shanghai. Web site of the company: http://www.shtdo.com/ Signed-off-by:
-
Dave Airlie authored
This isn't really used anymore, if drivers needs it later, just add back an inline wrapper. Reviewed-by:
-
- Oct 18, 2020
-
-
Tian Tao authored
Consistently Use the same style of variable type in hibmc_drm_drv.c and hibmc_drm_drv.h. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1602808711-65193-3-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
Consistently Use the same style of variable type in hibmc_drm_de.c. Signed-off-by:
-
- Oct 17, 2020
-
-
Bernard Zhao authored
In function via_mem_alloc`s error branch, DRM_ERROR is protected in the mutex_lock(&dev->struct_mutex) area. >From the code, we see that DRM_ERROR is just an error log print without any struct element, there is no need to protect this. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 179c02fe ("drm/tve200: Add new driver for TVE200") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
-
Jagan Teki authored
Add panel timings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Jagan Teki authored
Add dt-bindings for YTC700TLAG-05-201C 7" TFT LCD panel from Yes Optoelectronics Co.,Ltd. Signed-off-by:
-
Jagan Teki authored
Add vendor dt-bindings for Yes Optoelectronics Co.,Ltd. Signed-off-by:
-
Jason Yan authored
Eliminate the following coccicheck warning: drivers/video/fbdev/fsl-diu-fb.c:1428:5-8: Unneeded variable: "res". Return "0" on line 1450 Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Jason Yan authored
Eliminate the following coccicheck warning: drivers/video/fbdev/sis/sis_accel.h:143:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:144:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:145:72-73: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:273:75-76: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:274:75-76: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:275:73-74: Unneeded semicolon drivers/video/fbdev/sis/sis_accel.h:276:75-76: Unneeded semicolon Reported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/panel/panel-sitronix-st7703.c:156:26: warning: symbol 'jh057n00900_panel_desc' was not declared. Should it be static? Reported-by:
Guido Günther <agx@sigxcpu.org> [Use static const] Signed-off-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/bridge/adv7511/adv7511_audio.c:58:5: warning: symbol 'adv7511_hdmi_hw_params' was not declared. Should it be static? Reported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:527:5: warning: symbol 'analogix_dp_start_aux_transaction' was not declared. Should it be static? Reported-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
-
- Oct 16, 2020
-
-
Qilong Zhang authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
Qilong Zhang <zhangqilong3@huawei.com> Signed-off-by:
-
Qinglang Miao authored
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Xin Ji authored
The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed for portable device. It converts MIPI DSI/DPI to DisplayPort 1.3 4K. Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Xin Ji authored
anx7625: MIPI to DP transmitter DT schema Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
-
Biju Das authored
Add the support for enabling optional regulator that may be used as VCC source. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Replaced 'error' variable with 'ret'] [Renamed regulator from 'vcc' to 'power'] Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
Wang Qing authored
Use kobj_to_dev() instead of container_of() Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Li Heng authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/video/fbdev/sis/300vtbl.h:1064:28: warning: ‘SiS300_CHTVVCLKSONTSC’ defined but not used [-Wunused-const-variable=] Reported-by:
Li Heng <liheng40@huawei.com> Signed-off-by:
-
Yannick Fertre authored
Compute new timings to get a framerate of 50fps with a pixel clock @54Mhz. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Tested-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
-
Xu Wang authored
Because clk_disable_unprepare already checked NULL clock parameter, so the additional checks are unnecessary, just remove it Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Douglas Anderson authored
On some panels hooked up to the ti-sn65dsi86 bridge chip we found that link training was failing. Specifically, we'd see: ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR* Link training failed, link is off (-5) The panel was hooked up to a logic analyzer and it was found that, as part of link training, the bridge chip was writing a 0x1 to DPCD address 00600h and the panel responded NACK. As can be seen in header files, the write of 0x1 to DPCD address 0x600h means we were trying to write the value DP_SET_POWER_D0 to the register DP_SET_POWER. The panel vendor says that a NACK in this case is not unexpected and means "not ready, try again". In testing, we found that this panel would respond with a NACK in about 1/25 times. Adding the retry logic worked fine and the most number of tries needed was 3. Just to be safe, we'll add 10 tries here and we'll add a little blurb to the logs if we ever need more than 5. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Tested-By:
Steev Klimaszewski <steev@kali.org> Signed-off-by:
-
