- Oct 25, 2019
-
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Ben Dooks authored
Add __ioemm attribute to reg_rng to fix the following sparse warnings: drivers/char/hw_random/ks-sa-rng.c:102:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:102:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:102:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:104:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:104:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:104:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:113:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:113:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:113:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:116:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:116:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:116:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:119:17: warning: incorrect type in argument 1 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:119:17: expected void const volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:119:17: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:121:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:121:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:121:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:132:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:132:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:132:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:143:19: warning: incorrect type in argument 1 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:143:19: expected void const volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:143:19: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:144:19: warning: incorrect type in argument 1 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:144:19: expected void const volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:144:19: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:146:9: warning: incorrect type in argument 2 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:146:9: expected void volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:146:9: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:160:25: warning: incorrect type in argument 1 (different address spaces) drivers/char/hw_random/ks-sa-rng.c:160:25: expected void const volatile [noderef] <asn:2> *addr drivers/char/hw_random/ks-sa-rng.c:160:25: got unsigned int * drivers/char/hw_random/ks-sa-rng.c:194:28: warning: incorrect type in assignment (different address spaces) drivers/char/hw_random/ks-sa-rng.c:194:28: expected struct trng_regs *reg_rng drivers/char/hw_random/ks-sa-rng.c:194:28: got void [noderef] <asn:2> * Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ard Biesheuvel authored
Add the logic to deal with input sizes that are not a round multiple of the AES block size, as described by the XTS spec. This brings the SPE implementation in line with other kernel drivers that have been updated recently to take this into account. Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Tested with: export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig cat >> .config << EOF # CONFIG_MODULES is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y EOF make olddefconfig make -j32 qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \ -kernel arch/powerpc/boot/zImage \ -append cryptomgr.fuzz_iterations=1000 Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this patch. This patch also cleans up the code by ma...
-
Eric Biggers authored
Set the ivsize for the "ecb-ppc-spe" algorithm to 0, since ECB mode doesn't take an IV. This fixes a failure in the extra crypto self-tests: alg: skcipher: ivsize for ecb-ppc-spe (16) doesn't match generic impl (0) Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
The PowerPC SPE implementations of AES modes only disable preemption during the actual encryption/decryption, not during the scatterwalk functions. It's therefore unnecessary to request an atomic scatterwalk. So don't do so. Signed-off-by:
-
Ard Biesheuvel authored
In order to speed up aegis128 processing even more, duplicate the init() and final() routines as SIMD versions in their entirety. This results in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES instructions). Signed-off-by:
-
Ard Biesheuvel authored
Instead of passing around an ops structure with function pointers, which forces indirect calls to be used, refactor the code slightly so we can use ordinary function calls. At the same time, switch to a static key to decide whether or not the SIMD code path may be used. Signed-off-by:
-
Sumit Garg authored
Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG data rate which takes approx. 700us to produce 16 bytes of output data as per testing results. So configure the timeout as 1000us to also take account of lack of udelay()'s reliability. Fixes: 38321242 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K") Cc: <stable@vger.kernel.org> Signed-off-by:
Sumit Garg <sumit.garg@linaro.org> Signed-off-by:
-
- Oct 23, 2019
-
-
Pascal van Leeuwen authored
safexcel_pci_remove() is only used locally in the module and not exported, so added a static function specifier. This fixes a sparse issue reported by Ben Dooks. Fixes: 625f269a ("crypto: inside-secure - add support for...") Signed-off-by:
Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by:
-
Pascal van Leeuwen authored
Always take the zero length hash value for SM3 from the local constant to avoid a reported build error when SM3 is configured to be a module. Fixes: 0f2bc131 ("crypto: inside-secure - Added support for...") Signed-off-by:
-
Rikard Falkeborn authored
Arguments are supposed to be ordered high then low. Fixes: c8b4b477 ("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Laurent Vivier authored
Commit daae28de has moved add_early_randomness() out of the rng_mutex and tries to protect the reference of the new rng device by incrementing the reference counter. But in hwrng_register(), the function can be called with a new device that is not set as the current_rng device and the reference has not been initialized. This patch fixes the problem by not using the reference counter when the device is not the current one: the reference counter is only meaningful in the case of the current rng device and a device is not used if it is not the current one (except in hwrng_register()) The problem has been reported by Marek Szyprowski on ARM 32bit Exynos5420-based Chromebook Peach-Pit board: WARNING: CPU: 3 PID: 1 at lib/refcount.c:156 hwrng_register+0x13c/0x1b4 refcount_t: increment on 0; use-after-free. Modules linked in: CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00061-gdaae28debcb0 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c01124c8>] (unwind_backtrace) from [<c010dfb8>] (show_stack+0x10/0x14) [<c010dfb8>] (show_stack) from [<c0ae86d8>] (dump_stack+0xa8/0xd4) [<c0ae86d8>] (dump_stack) from [<c0127428>] (__warn+0xf4/0x10c) [<c0127428>] (__warn) from [<c01274b4>] (warn_slowpath_fmt+0x74/0xb8) [<c01274b4>] (warn_slowpath_fmt) from [<c054729c>] (hwrng_register+0x13c/0x1b4) [<c054729c>] (hwrng_register) from [<c0547e54>] (tpm_chip_register+0xc4/0x274) ... Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: daae28de ("hwrng: core - move add_early_randomness() out of rng_mutex") Tested-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
-
Eric Biggers authored
Convert the PowerPC Nest (NX) implementation of AES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
Convert the PowerPC Nest (NX) implementation of AES-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
Convert the PowerPC Nest (NX) implementation of AES-ECB from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
The NX crypto driver is using 'struct blkcipher_desc' to pass the IV around, even for AEADs (for which it creates the struct on the stack). This is not appropriate since this structure is part of the "blkcipher" API, which is deprecated and will be removed. Just pass around the IV directly instead. Signed-off-by:
-
Eric Biggers authored
Convert the VIA PadLock implementations of AES-ECB and AES-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the S390 CPACF implementations of DES-ECB, DES-CBC, DES-CTR, 3DES-ECB, 3DES-CBC, and 3DES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Note: I made CTR use the same function for encryption and decryption, since CTR encryption and decryption are identical. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the S390 CPACF protected key implementations of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Note: I made CTR use the same function for encryption and decryption, since CTR encryption and decryption are identical. Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the S390 CPACF implementations of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Note: I made CTR use the same function for encryption and decryption, since CTR encryption and decryption are identical. Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the SPARC64 DES opcodes implementations of DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the SPARC64 Camellia opcodes implementations of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Eric Biggers authored
Convert the glue code for the SPARC64 AES opcodes implementations of AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by:
-
Yunfeng Ye authored
A warning message reported by a static analysis tool: " Either the condition 'if(skb)' is redundant or there is possible null pointer dereference: skb. " Remove the unused redundant check. Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by:
-
Zhou Wang authored
To avoid compile error in some platforms, select NEED_SG_DMA_LENGTH in qm Kconfig. Fixes: dfed0098 ("crypto: hisilicon - add hardware SGL support") Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/crypto/ux500/hash/hash_core.c: In function hash_set_dma_transfer: drivers/crypto/ux500/hash/hash_core.c:143:15: warning: variable cookie set but not used [-Wunused-but-set-variable] It is not used since commit 8a63b199 ("crypto: ux500 - Add driver for HASH hardware") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Ard Biesheuvel authored
Instead of allowing the Crypto Extensions algorithms to be selected when using a toolchain that does not support them, and complain about it at build time, use the information we have about the compiler to prevent them from being selected in the first place. Users that are stuck with a GCC version <4.8 are unlikely to care about these routines anyway, and it cleans up the Makefile considerably. While at it, add explicit 'armv8-a' CPU specifiers to the code that uses the 'crypto-neon-fp-armv8' FPU specifier so we don't regress Clang, which will complain about this in version 10 and later. Signed-off-by:
-
Eric Biggers authored
The geode AES driver is heavily broken because it stores per-request state in the transform context. So it will crash or produce the wrong result if used by any of the many places in the kernel that issue concurrent requests for the same transform object. This driver is also implemented using the deprecated blkcipher API, which makes it difficult to fix, and puts it among the drivers preventing that API from being removed. Convert this driver to use the skcipher API, and change it to not store per-request state in the transform context. Fixes: 9fe757b0 ("[PATCH] crypto: Add support for the Geode LX AES hardware") Signed-off-by:
-
Łukasz Stelmach authored
Add binding documentation for the True Random Number Generator found on Samsung Exynos 5250+ SoCs. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
- Oct 18, 2019
-
-
YueHaibing authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by:
Antoine Tenart <antoine.tenart@ack.tf> Acked-by:
-
Ben Dooks authored
Fix the following build warnings by adding a header for the definitions shared between jitterentropy.c and jitterentropy-kcapi.c. Fixes the following: crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static? crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static? crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static? crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static? Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Add in missing newline. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
