CamleCase: Beaglebone -> BeagleBone

.gitignore

@@ -10,7 +10,7 @@
 \#*\#
 cscope.*
 .dir
-
+*.diff
 /*.patch
 
 # The .cache directory will be used to cache toolchain capabilities if

accessories/power-supplies.rst

@@ -3,8 +3,8 @@
 Power supplies
 ###############
 
-All Beaglebone boards require different power supplies like Beaglebone Balack and other AM335X 
-based boards will be fine with a 5VDC @ 1A  but, Beaglebone AI-64 requires aleast 5VDC @ 3A. You 
+All BeagleBone boards require different power supplies like BeagleBone Balack and other AM335X 
+based boards will be fine with a 5VDC @ 1A  but, BeagleBone AI-64 requires aleast 5VDC @ 3A. You 
 have to either supply the power via usb jack or a 2.1mm, center positive barrel jack. 
 
 .. note::
@@ -22,7 +22,7 @@ Sources for supplies that work include:
 
 .. tip::
     Most mobile phone chargers are capable of delivering enough 
-    current to power any Beaglebone. You may try using that before buying
+    current to power any BeagleBone. You may try using that before buying
     any standalone power srource for your board.
 
 If you plan to use capes or add your own circuitry, higher amperage may be required.

boards/beaglebone/blue/accessories.rst

@@ -75,7 +75,7 @@ UART, I2C, CAN, Quadrature encoders, PWR
 4-wire JST-SH (1mm pitch)
 
 -  `4-wire Grove
-   cable <https://www.seeedstudio.com/Grove-Universal-4-Pin-to-Beaglebone-Blue-4-Pin-Female-JST-SH-Convertion-Cable-(10-pcs-pack)-p-3026.html>`__
+   cable <https://www.seeedstudio.com/Grove-Universal-4-Pin-to-BeagleBone-Blue-4-Pin-Female-JST-SH-Convertion-Cable-(10-pcs-pack)-p-3026.html>`__
    (`Digi-Key <https://www.digikey.com/product-detail/en/seeed-technology-co-ltd/114991495/1597-1622-ND/8558386>`__)
 -  `Hobby King SKU
    258000190-0 <https://hobbyking.com/en_us/jst-sh-4pin-male-with-pig-tail.html>`__
@@ -104,7 +104,7 @@ SPI, GPIO, ADC
 -  `Digi-Key
    housings <https://www.digikey.com/product-detail/en/jst-sales-america-inc/SHR-06V-S-B/455-1381-ND/759870>`__
 -  `6-wire Grove cable (4
-   populated) <https://www.seeedstudio.com/Grove-Universal-4-Pin-to-Beaglebone-Blue-6-Pin-Female-JST-SH-Convertion-Cable-(10-pcs-pack)-p-3027.html>`__
+   populated) <https://www.seeedstudio.com/Grove-Universal-4-Pin-to-BeagleBone-Blue-6-Pin-Female-JST-SH-Convertion-Cable-(10-pcs-pack)-p-3027.html>`__
    (`Digi-Key <https://www.digikey.com/product-detail/en/seeed-technology-co-ltd/114991496/1597-1623-ND/8558387>`__)
 
 Motors

boards/beaglebone/blue/faq.rst

@@ -87,7 +87,7 @@ https://www.mathworks.com/hardware-support/beaglebone-blue.html
 
 .. _my_beaglebone_blue_fails_to_run_successful_tests:
 
-My Beaglebone Blue fails to run successful tests
+My BeagleBone Blue fails to run successful tests
 ======================================================
 
 You've tried to run rc_test_drivers to ensure your board is working for

boards/beaglebone/blue/flashing-firmware.rst

@@ -8,9 +8,9 @@ Overview
 
 Most Beaglebones have a built in 4 GB SD card known as a eMMC (embedded
 MMC). When the boards are made the eMMC is “flashed” with some version
-of the Beaglebone OS that is usually outdated. Therefore, whenever
-receiving the Beaglebone it is recommend that you update the eMMC with
-the last version of the Beaglebone OS or a specific version of it if
+of the BeagleBone OS that is usually outdated. Therefore, whenever
+receiving the BeagleBone it is recommend that you update the eMMC with
+the last version of the BeagleBone OS or a specific version of it if
 someone tells you otherwise.
 
 Required Items
@@ -18,7 +18,7 @@ Required Items
 
 1. Micro sd card. 4 GB minimum
 2. Micro sd card reader or a built in sd card reader for your PC
-3. Beaglebone image you want to flash.
+3. BeagleBone image you want to flash.
 4. `Etcher utility <https://etcher.io/>`__ for your PC’s OS.
 
 Steps Overview
@@ -26,20 +26,20 @@ Steps Overview
 
 1. Burn the image you want to flash onto a micro sd card using the
    Etcher utility.
-2. Boot the Beaglebone like normal and place the micro sd card into the
+2. Boot the BeagleBone like normal and place the micro sd card into the
    board once booted.
 3. Update the micro sd card image so its in “flashing” mode.
-4. Insert micro sd card, remove power from the Beaglebone, hold sd card
+4. Insert micro sd card, remove power from the BeagleBone, hold sd card
    select button, power up board
 5. Let the board flash
 
 Windows PCs
 =============
 
-1.  Download the `Beaglebone
+1.  Download the `BeagleBone
     OS <https://beagleboard.org/latest-images>`__ image you want to use.
 2.  Use the `Etcher utility <https://etcher.io/>`__ to burn the
-    Beaglebone image you want to use on the micro sd card you plan on
+    BeagleBone image you want to use on the micro sd card you plan on
     using.
 3.  Make sure you don’t have the micro sd card plugged into your board.
 4.  Boot the board
@@ -71,9 +71,9 @@ Windows PCs
 13. Restart (RST button) or power up (while still pushing SD button).
 
 Flashing can take some minutes. ## Linux/Mac PCs 1. Download the
-`Beaglebone OS <https://beagleboard.org/latest-images>`__ image you want
+`BeagleBone OS <https://beagleboard.org/latest-images>`__ image you want
 to use. 1. Use the `Etcher utility <https://etcher.io/>`__ to burn the
-Beaglebone image you want to use on the micro sd card you plan on using.
+BeagleBone image you want to use on the micro sd card you plan on using.
 1. On the SD card edit the file ``/boot/uEnv.txt`` in order for the SD
 card contents to be flashed onto the firmware eMMC. (Otherwise the BBBL
 will do no more than boot the SD image.) Uncomment the line containing

books/pru-cookbook/projects.rst

@@ -187,7 +187,7 @@ documentation visit the PRU-ICSS wiki.
 .. dropdown:: **Thermal imaging camera**
     :open:
     
-    **Description:** Thermal camera using Beaglebone Black, a small LCD, and a thermal array sensor    
+    **Description:** Thermal camera using BeagleBone Black, a small LCD, and a thermal array sensor    
 
     **Type:** Project Code Library
 
@@ -208,8 +208,8 @@ documentation visit the PRU-ICSS wiki.
 .. dropdown:: **Emulated memory interface**
     :open:
     
-    **Description:** ABX loads amovie into the Beaglebone's memory and then launches the memory emulator 
-    on the PRU sub-processor of the Beaglebone's ARM AM335x
+    **Description:** ABX loads amovie into the BeagleBone's memory and then launches the memory emulator 
+    on the PRU sub-processor of the BeagleBone's ARM AM335x
     
     **Type:** Project
 
@@ -231,7 +231,7 @@ documentation visit the PRU-ICSS wiki.
     :open:
     
     **Description:** Investigating the fastest way to program using JTAG and provide 
-    for debugging facilities built into the Beaglebone.
+    for debugging facilities built into the BeagleBone.
 
     **Type:** Project
     
@@ -262,8 +262,8 @@ documentation visit the PRU-ICSS wiki.
 .. dropdown:: **VisualPRU**
     :open:
     
-    **Description:** VisualPRU is a minimal browser-based editor and debugger for the Beaglebone PRUs. 
-    The app runs from a local server on the Beaglebone.
+    **Description:** VisualPRU is a minimal browser-based editor and debugger for the BeagleBone PRUs. 
+    The app runs from a local server on the BeagleBone.
     
     **Type:**  Editor and Debugger