Merge branch 'main' into 'main'

Fix a couple small spelling/capitalization nits.

See merge request !54

boards/beagleconnect/freedom/02-quick-start.rst

@@ -40,7 +40,7 @@ Attaching antenna
 
 To connect the SubGHz antenna with SMA connector to the BeagleConnect Freedom 
 you just have to align, place and rotate the antenna clockwise as shown in the 
-image below. To ditach the antenna just twist it anti-clocwise.
+image below. To detach the antenna just twist it anti-clockwise.
 
 .. figure:: media/BeagleConnect-Freedom-antenna-connection.*
    :align: center

boards/beagleplay/05-demos.rst

@@ -13,7 +13,7 @@ Demos and tutorials
 
     **Using serial console**
     ^^^
-    Learn ho to use any USB-UART converter to get access to BeaglePlay via serial console .
+    Learn how to use any USB-UART converter to get access to BeaglePlay via serial console.
     +++
     .. admonition:: Complexity level
         
@@ -59,9 +59,9 @@ Demos and tutorials
     :link: beagleplay-qwiic
     :link-type: ref
 
-    **Using QWIIC**
+    **Using Qwiic**
     ^^^
-    Learn to expand your BeaglePlay capabilities via quiic I2C boards.
+    Learn to expand your BeaglePlay capabilities via Qwiic I2C boards.
     +++
     .. admonition:: Complexity level
         

boards/beagleplay/demos-and-tutorials/zephyr-cc1352-development.rst

@@ -84,7 +84,7 @@ does not have a USB device, so the application was modified to communicate over
 For the :ref:`beagleconnect_freedom_home`, a USB-to-UART bridge device was used and the USB endpoints
 were made compatible with the `WPANUSB linux driver <https://github.com/finikorg/wpanusb>`_ which we
 `augmented <https://git.beagleboard.org/beagleconnect/linux/wpanusb/>`_ to support this board. To utilize
-the existing `WPANUSB` Zephyr application and this Linxu driver, we chose to encode our UART traffic with
+the existing `WPANUSB` Zephyr application and this Linux driver, we chose to encode our UART traffic with
 `HDLC <https://en.wikipedia.org/wiki/High-Level_Data_Link_Control>`_. This has the advantage of enabing a
 serial console interface to the Zephyr shell while WPANUSB-specific traffic is directed to other
 `USB endpoints <https://simple.wikipedia.org/wiki/USB#How_USB_works>`_.