Update accessories content

accessories/cables.rst

@@ -131,8 +131,28 @@ Bad HDMI Cables
 
 `High Speed HDMI Cable with Ethernet ,Type D Micro M/M Cable <http://www.newegg.com/Product/Product.aspx?Item=N82E16882241049>`_: Didn't work, not grounded. 
 
+Working MiniDP to HDMI
+-----------------------
+
+.. note::
+    BeagleBone-AI64 requires **ACTIVE** miniDP to HDMI cable or adaptor to work, 
+    your passive miniDP to HDMI setup will not work at all.
+
+- `IVANKY 4K Active Mini DisplayPort to HDMI Adapter <https://www.amazon.com/dp/B089GF8M87/>`_
+- `CableCreation Mini DP (Thunderbolt 2 Compatible) to HDMI <https://www.amazon.in/CD0257-Mini-DP-to-HDMI/dp/B01FM51O0W/>`_
+
+Bad MiniDP to HDMI
+-------------------
+
+- `UGREEN Mini DP Male to HDMI <https://www.amazon.in/Mini-Male-Female-Converter-Cable/dp/B01CL1P6TA/>`_
+- `AGARO Mini Displayport (Mini Dp) To Hdmi <https://www.amazon.in/AGARO-Meters-Laptop-Computers-Mobile/dp/B09GW1NMNZ/>`_
+- `AmazonBasics Mini Display Port to HDMI <https://www.amazon.in/AmazonBasics-Mini-DisplayPort-HDMI-Adapter/dp/B0134V3KIA/>`_
+
 USB Cables
 -----------
 
-TBD
+According the board you have, you can choose any cable to handle the current required like,
+
+- MicroUSB to TypeA (3Amp)
+- Type-C to Type-A (5Amp)
 

accessories/cameras.rst

@@ -4,8 +4,18 @@ Cameras
 #######
 
 USB Cameras
-=============
+************
 
+- Logitech c270
 
 CSI Cameras
-===========
\ No newline at end of file
+************
+
+.. note:: 
+    Using any CSI camera will require you to load an additional overlay.
+    
+BeagleBone AI-64
+=================
+
+- IMX219 from Arducam
+- Raspberry Pi v2 (IMX219)
\ No newline at end of file

accessories/displays.rst

@@ -15,6 +15,10 @@ Check here often as we will update the list as we confirm the operation. Let
 model and resolution at which it works and we will add it to the list. Only the highest 
 resolution is listed below.
 
+.. note::
+    All the monitors most likely will work with AI-64 also but, make sure that 
+    you are using active miniDP to HDMI converter becuase passive convertor will not work.
+
 Links are not provided as they change frequently. So, search on the model number to find a source for these.
 
 - Sony Model LMD-2450W 1280 x 1024 @60Hz
@@ -49,3 +53,8 @@ Panasonic TX-L19X10BW 1280x720 @60Hz.
 
 Unsupported Televisions
 ------------------------
+
+.. tip::
+    If you don't have a monitor/TV you can use a Video Captiure Card like 
+    `this from PiBox <https://www.amazon.com/Capture-India-Aluminium-Streaming-Teaching/dp/B0973PR9HH/>`_ 
+    with `OBS <https://obsproject.com/>`_ or any camera application to see the video coming through.
\ No newline at end of file

accessories/peripherals.rst

@@ -3,6 +3,11 @@
 Peripherals
 ############
 
+.. note::
+    Most Keyboards, Mouse, and USB Hubs are plug-n-play devices and they are 
+    supported out of the box in linux. List below only shows what has been tested. 
+    You may have something different and it will work without any additional software requirement.
+
 Keyboards
 ==========
 
@@ -23,10 +28,10 @@ Mice
 
 **Make sure that you plug the mice into the USB Host connector before powering on the board.**
 
-- `Microsoft Wireless 1000 <http://www.amazon.com/Microsoft-Wireless-Mobile-Mouse-1000/dp/B003STDQQU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1371841170&sr=1-1&keywords=microsoft+wireless+1000>`
-- `Logitech M705 <http://www.amazon.com/Logitech-Wireless-Marathon-Battery-910-001935/dp/B003TG75EG/>`
-- `Logitech M600 <http://www.amazon.com/Logitech-Touch-Mouse-M600-910-002666/dp/B006MBP7T0/>`
-- `Logitech M310 <http://www.logitech.com/en-us/product/wireless-mouse-m310>`
+- `Microsoft Wireless 1000 <http://www.amazon.com/Microsoft-Wireless-Mobile-Mouse-1000/dp/B003STDQQU/ref=sr_1_1?s=electronics&ie=UTF8&qid=1371841170&sr=1-1&keywords=microsoft+wireless+1000>`_
+- `Logitech M705 <http://www.amazon.com/Logitech-Wireless-Marathon-Battery-910-001935/dp/B003TG75EG/>`_
+- `Logitech M600 <http://www.amazon.com/Logitech-Touch-Mouse-M600-910-002666/dp/B006MBP7T0/>`_
+- `Logitech M310 <http://www.logitech.com/en-us/product/wireless-mouse-m310>`_
 
 USB HUBS
 =========
@@ -39,4 +44,6 @@ USB HUBS
 - `D-LINK DUB-H7 <http://www.dlink.com/us/en/home-solutions/connect/usb/dub-h7-7-port-usb-2-0-hub>`_
 - `Trust HU-5770 7-Port Powered Hub <http://www.amazon.co.uk/TRUST-UK-HU-5770-PORT-POWERED/dp/B000HG5Q42>`_
 
-
+.. tip::
+    Make sure you are powering BeagleBone with decent power supply with 
+    enough current before attaching any additional Peripherals.

accessories/power-supplies.rst

@@ -20,5 +20,10 @@ Sources for supplies that work include:
 - `Sparkfun <https://www.sparkfun.com/products/8269?>`_
 - `Logic Supply <http://www.logicsupply.com/pw-5v2a/>`_
 
+.. tip::
+    Most mobile phone chargers are capable of delivering enough 
+    current to power any Beaglebone. You may try using that before buying
+    any standalone power srource for your board.
+
 If you plan to use capes or add your own circuitry, higher amperage may be required.
 Make sure that you have a grounded connection. This can be the USB cable or the HDMI cable.