beaglebone-ai: more in line with other board organization

boards/beaglebone/ai/ch11.rst

 .. _beaglebone-ai-support:
 
-Support Information
-######################
+Additional Support Information
+##############################
 
-TODO: Reference https://docs.beagleboard.org/latest/intro/support/index.html and
-https://beagleboard.org/resources
+.. todo::
 
-Related TI documentation: http://www.ti.com/tool/BEAGLE-3P-BBONE-AI
+  Reference https://docs.beagleboard.org/latest/intro/support/index.html and
\ No newline at end of file
+  https://beagleboard.org/resources
+
+  Related TI documentation: http://www.ti.com/tool/BEAGLE-3P-BBONE-AI
+
+.. _beaglebone-ai-regulatory:
+
+REGULATORY, COMPLIANCE, AND EXPORT INFORMATION
+*************************************************
+
+-  Country of origin: PRC
+-  FCC: 2ATUT-BBONE-AI
+-  CE: TBD
+-  CNHTS: 8543909000
+-  USHTS: 8473301180
+-  MXHTS: 84733001
+-  TARIC: 8473302000
+-  ECCN: 5A992.C
+-  CCATS:
+   `Z1613110/G180570 <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/tree/master/regulatory/Validation_Z1613110.pdf>`__
+-  RoHS/REACH: TBD
+-  Volatility: TBD
+
+.. _beaglebone-ai-mechanical:
+
+Mechanical Information
+************************
+
+-  Board Dimensions: 8.9cm x 5.4cm x 1.5cm
+-  Board Net Weight 48g
+-  Packaging Dimensions: 13.8cm x 10cm x 4cm
+-  Gross Weight (including packaging): 110g
+-  3D STEP model:
+   https://git.beagleboard.org/beagleboard/beaglebone-ai/-/tree/master/Mechanical
+
+
+.. _beaglebone-ai-change-history:
+
+Change History
+***************
+
+Rev A0
+=======
+
+Initial prototype revision. Not taken to production.
+eMMC flash image provided by Embest.
+
+Rev A1
+=======
+
+Second round prototype.
+
+-  Fixed size of mounting holes.
+-  Added LED for WiFi status.
+-  Added microHDMI.
+-  Changed eMMC voltage from 3.3V to 1.8V to support HS200.
+-  Changed eMMC from 4GB to 16GB.
+-  Changed serial debug header from 6-pin 100mil pitch to 3-pin 1.5mm pitch.
+-  Switched expansion header from UART4 to UART5. The UART4 pins were used for the microHDMI.
+
+eMMC flash image provided by Embest.
+
+Rev A1a
+========
+
+Alpha pilot-run units and initial production.
+
+-  `Added pull-down resistor on serial debug header RX
+   line <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/24>`__.
+
+Alpha pilot-run eMMC flash image:
+https://debian.beagleboard.org/images/bbai-pilot-20190408.img.xz
+
+Production eMMC flash image:
+http://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz
+
+Rev A2
+=======
+
+Proposed changes.
+
+-  `HW: need pull-down on console uart RX line 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/24>`__.
+
+-  `HW: position of microSD may impact existing case designs 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/25>`__.
+
+-  `HW: P9.13 does not have a GPIO 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/-/issues/22>`__.
+
+-  `HW: HDMI hotplug detection not working 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/19>`__.
+
+-  `HW: add extra DCAN 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/20>`__.
+
+-  `HW: wire mods required to enable JTAG 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/21>`__.
+
+-  `HW: Small I2C nvmem/eeprom for board identifier 
+   <https://git.beagleboard.org/beagleboard/beaglebone-ai/issues/23>`__.
+
+.. _beaglebone-ai-pictures:
+
+Pictures
+*********
+
+.. image:: images/BB_AI_Front.jpg
+    :align: center
+
+.. image:: images/BB_AI_Back.jpg
+    :align: center

boards/beaglebone/ai/index.rst

@@ -17,7 +17,7 @@ BeagleBone AI is based on the Texas Instruments AM5729 dual-core Cortex-A15 SoC
     * Design materials and license can be found in the `git repository <https://git.beagleboard.org/beagleboard/beaglebone-ai>`__
     * Use of the boards or design materials constitutes an agreement to the :ref:`boards-terms-and-conditions`
     * Software images and purchase links available on the `board page <https://www.beagleboard.org/boards/beaglebone-ai>`__
-
+    * For export, emissions and other compliance, see :ref:`beaglebone-ai-support`
 
 .. image:: images/BB_AI_handheld_500px.jpg
    :width: 500
@@ -30,15 +30,11 @@ BeagleBone AI is based on the Texas Instruments AM5729 dual-core Cortex-A15 SoC
     :maxdepth: 1
 
     ch01.rst
-    ch02.rst
     ch03.rst
     ch04.rst
     ch05.rst
     ch06.rst
     ch07.rst
     ch08.rst
-    ch09.rst
-    ch10.rst
     ch11.rst
-    ch12.rst