static_call: Properly initialise DEFINE_STATIC_CALL_RET0()

When a static call is updated with __static_call_return0() as target,
arch_static_call_transform() set it to use an optimised set of
instructions which are meant to lay in the same cacheline.

But when initialising a static call with DEFINE_STATIC_CALL_RET0(),
we get a branch to the real __static_call_return0() function instead
of getting the optimised setup:

	c00d8120 <__SCT__perf_snapshot_branch_stack>:
	c00d8120:	4b ff ff f4 	b       c00d8114 <__static_call_return0>
	c00d8124:	3d 80 c0 0e 	lis     r12,-16370
	c00d8128:	81 8c 81 3c 	lwz     r12,-32452(r12)
	c00d812c:	7d 89 03 a6 	mtctr   r12
	c00d8130:	4e 80 04 20 	bctr
	c00d8134:	38 60 00 00 	li      r3,0
	c00d8138:	4e 80 00 20 	blr
	c00d813c:	00 00 00 00 	.long 0x0

Add ARCH_DEFINE_STATIC_CALL_RET0_TRAMP() defined by each architecture
to setup the optimised configuration, and rework
DEFINE_STATIC_CALL_RET0() to call it:

	c00d8120 <__SCT__perf_snapshot_branch_stack>:
	c00d8120:	48 00 00 14 	b       c00d8134 <__SCT__perf_snapshot_branch_stack+0x14>
	c00d8124:	3d 80 c0 0e 	lis     r12,-16370
	c00d8128:	81 8c 81 3c 	lwz     r12,-32452(r12)
	c00d812c:	7d 89 03 a6 	mtctr   r12
	c00d8130:	4e 80 04 20 	bctr
	c00d8134:	38 60 00 00 	li      r3,0
	c00d8138:	4e 80 00 20 	blr
	c00d813c:	00 00 00 00 	.long 0x0

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1e0a61a88f52a460f62a58ffc2a5f847d1f7d9d8.1647253456.git.christophe.leroy@csgroup.eu