- Mar 17, 2021
-
-
Trond Myklebust authored
[ Upstream commit 82e7ca13 ] There should be no reason to expect the directory permissions to change just because the directory contents changed or a negative lookup timed out. So let's avoid doing a full call to nfs_mark_for_revalidate() in that case. Furthermore, if this is a negative dentry, and we haven't actually done a new lookup, then we have no reason yet to believe the directory has changed at all. So let's remove the gratuitous directory inode invalidation altogether when called from nfs_lookup_revalidate_negative(). Reported-by:
Geert Jansen <gerardu@amazon.com> Fixes: 5ceb9d7f ("NFS: Refactor nfs_lookup_revalidate()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Coddington authored
[ Upstream commit f0940f4b ] We could recurse into NFS doing memory reclaim while sending a sync task, which might result in a deadlock. Set memalloc_nofs_save for sync task execution. Fixes: a1231fda ("SUNRPC: Set memalloc_nofs_save() on all rpciod/xprtiod jobs") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Anshuman Khandual authored
[ Upstream commit eeb0753b ] pfn_valid() validates a pfn but basically it checks for a valid struct page backing for that pfn. It should always return positive for memory ranges backed with struct page mapping. But currently pfn_valid() fails for all ZONE_DEVICE based memory types even though they have struct page mapping. pfn_valid() asserts that there is a memblock entry for a given pfn without MEMBLOCK_NOMAP flag being set. The problem with ZONE_DEVICE based memory is that they do not have memblock entries. Hence memblock_is_map_memory() will invariably fail via memblock_search() for a ZONE_DEVICE based address. This eventually fails pfn_valid() which is wrong. memblock_is_map_memory() needs to be skipped for such memory ranges. As ZONE_DEVICE memory gets hotplugged into the system via memremap_pages() called from a driver, their respective memory sections will not have SECTION_IS_EARLY set. Normal hotplug memory will never have MEMBLOCK_NOMAP set in their memblock regions. Because the flag MEMBLOCK_NOMAP was specifically designed and set for firmware reserved memory regions. memblock_is_map_memory() can just be skipped as its always going to be positive and that will be an optimization for the normal hotplug memory. Like ZONE_DEVICE based memory, all normal hotplugged memory too will not have SECTION_IS_EARLY set for their sections Skipping memblock_is_map_memory() for all non early memory sections would fix pfn_valid() problem for ZONE_DEVICE based memory and also improve its performance for normal hotplug memory as well. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Acked-by:
David Hildenbrand <david@redhat.com> Fixes: 73b20c84 ("arm64: mm: implement pte_devmap support") Signed-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1614921898-4099-2-git-send-email-anshuman.khandual@arm.com Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Sergey Shtylyov authored
[ Upstream commit 75be7fb7 ] According to the RZ/A1H Group, RZ/A1M Group User's Manual: Hardware, Rev. 4.00, the TRSCER register has bit 9 reserved, hence we can't use the driver's default TRSCER mask. Add the explicit initializer for sh_eth_cpu_data::trscer_err_mask for R7S72100. Fixes: db893473 ("sh_eth: Add support for r7s72100") Signed-off-by:
Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ian Abbott authored
commit 148e34fd upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the call to `comedi_buf_write_samples()` is passing the address of a 32-bit integer parameter. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the parameter holding the sample value to `unsigned short`. [Note: the bug was introduced in commit edf4537b ("staging: comedi: pcl818: use comedi_buf_write_samples()") but the patch applies better to commit d615416d ("staging: comedi: pcl818: introduce pcl818_ai_write_sample()").] Fixes: d615416d ("staging: comedi: pcl818: introduce pcl818_ai_write_sample()") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20210223143055.257402-10-abbotti@mev.co.uk Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
commit a084303a upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the call to `comedi_buf_write_samples()` is passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variable holding the sample value to `unsigned short`. Fixes: 1f44c034 ("staging: comedi: pcl711: use comedi_buf_write_samples()") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Ian Abbott authored
commit b39dfcce upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the calls to `comedi_buf_write_samples()` are passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variable holding the sample value to `unsigned short`. Fixes: de88924f ("staging: comedi: me4000: use comedi_buf_write_samples()") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Ian Abbott authored
commit 54999c0d upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the call to `comedi_buf_write_samples()` is passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variable holding the sample value to `unsigned short`. [Note: the bug was introduced in commit 1700529b ("staging: comedi: dmm32at: use comedi_buf_write_samples()") but the patch applies better to the later (but in the same kernel release) commit 0c0eadad ("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()").] Fixes: 0c0eadad ("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Ian Abbott authored
commit 459b1e8c upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the call to `comedi_buf_write_samples()` is passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variable holding the sample value to `unsigned short`. Fixes: ad9eb43c ("staging: comedi: das800: use comedi_buf_write_samples()") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Ian Abbott authored
commit 1c0f20b7 upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the call to `comedi_buf_write_samples()` is passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variable holding the sample value to `unsigned short`. Fixes: d1d24cb6 ("staging: comedi: das6402: read analog input samples in interrupt handler") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Ian Abbott authored
commit b2e78630 upstream. The analog input subdevice supports Comedi asynchronous commands that use Comedi's 16-bit sample format. However, the calls to `comedi_buf_write_samples()` are passing the address of a 32-bit integer variable. On bigendian machines, this will copy 2 bytes from the wrong end of the 32-bit value. Fix it by changing the type of the variables holding the sample value to `unsigned short`. The type of the `val` parameter of `pci1710_ai_read_sample()` is changed to `unsigned short *` accordingly. The type of the `val` variable in `pci1710_ai_insn_read()` is also changed to `unsigned short` since its address is passed to `pci1710_ai_read_sample()`. Fixes: a9c3a015 ("staging: comedi: adv_pci1710: use comedi_buf_write_samples()") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by:
-
Ian Abbott authored
commit ac0bbf55 upstream. The digital input subdevice supports Comedi asynchronous commands that read interrupt status information. This uses 16-bit Comedi samples (of which only the bottom 8 bits contain status information). However, the interrupt handler is calling `comedi_buf_write_samples()` with the address of a 32-bit variable `unsigned int status`. On a bigendian machine, this will copy 2 bytes from the wrong end of the variable. Fix it by changing the type of the variable to `unsigned short`. Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: <stable@vger.kernel.org> #4.0+ Signed-off-by:
-
Ian Abbott authored
commit 25317f42 upstream. The Change-Of-State (COS) subdevice supports Comedi asynchronous commands to read 16-bit change-of-state values. However, the interrupt handler is calling `comedi_buf_write_samples()` with the address of a 32-bit integer `&s->state`. On bigendian architectures, it will copy 2 bytes from the wrong end of the 32-bit integer. Fix it by transferring the value via a 16-bit integer. Fixes: 6bb45f2b ("staging: comedi: addi_apci_1032: use comedi_buf_write_samples()") Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Lee Gibson authored
commit 8687bf9e upstream. Function _rtl92e_wx_set_scan calls memcpy without checking the length. A user could control that length and trigger a buffer overflow. Fix by checking the length is within the maximum allowed size. Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Lee Gibson <leegib@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210226145157.424065-1-leegib@gmail.com Signed-off-by:
-
Lee Gibson authored
commit b93c1e39 upstream. Function r8712_sitesurvey_cmd calls memcpy without checking the length. A user could control that length and trigger a buffer overflow. Fix by checking the length is within the maximum allowed size. Signed-off-by:
-
Dan Carpenter authored
commit e163b982 upstream. The user can specify a "req->essid_len" of up to 255 but if it's over IW_ESSID_MAX_SIZE (32) that can lead to memory corruption. Fixes: 13a9930d ("staging: ks7010: add driver from Nanonote extra-repository") Signed-off-by:
-
Dan Carpenter authored
commit d4ac6403 upstream. The "ie_len" is a value in the 1-255 range that comes from the user. We have to cap it to ensure that it's not too large or it could lead to memory corruption. Fixes: 9a7fe54d ("staging: r8188eu: Add source files for new driver - part 1") Signed-off-by:
-
Dan Carpenter authored
commit d660f4f4 upstream. The memdup_user() function does not necessarily return a NUL terminated string so this can lead to a read overflow. Switch from memdup_user() to strndup_user() to fix this bug. Fixes: c6dc001f ("staging: r8712u: Merging Realtek's latest (v2.6.6). Various fixes.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 74b6b20d upstream. This code has a check to prevent read overflow but it needs another check to prevent writing beyond the end of the ->ssid[] array. Fixes: a2c60d42 ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by:
-
Dan Carpenter authored
commit 87107518 upstream. We need to cap len at IW_ESSID_MAX_SIZE (32) to avoid memory corruption. This can be controlled by the user via the ioctl. Fixes: 5f53d8ca ("Staging: add rtl8192SU wireless usb driver") Signed-off-by:
-
Dmitry Baryshkov authored
commit 20c40794 upstream. Verify that user applications are not using the kernel RPC message handle to restrict them from directly attaching to guest OS on the remote subsystem. This is a port of CVE-2019-2308 fix. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210212192658.3476137-1-dmitry.baryshkov@linaro.org Signed-off-by:
-
Shile Zhang authored
commit 65527a51 upstream. Export the module FDT device table to ensure the FDT compatible strings are listed in the module alias. This help the pvpanic driver can be loaded on boot automatically not only the ACPI device, but also the FDT device. Fixes: 46f934c9 ("misc/pvpanic: add support to get pvpanic device info FDT") Signed-off-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Link: https://lore.kernel.org/r/20210218123116.207751-1-shile.zhang@linux.alibaba.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan authored
commit 46613c9d upstream. usbip_sockfd_store() is invoked when user requests attach (import) detach (unimport) usb gadget device from usbip host. vhci_hcd sends import request and usbip_sockfd_store() exports the device if it is free for export. Export and unexport are governed by local state and shared state - Shared state (usbip device status, sockfd) - sockfd and Device status are used to determine if stub should be brought up or shut down. Device status is shared between host and client. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - While the device is exported, device status is marked used and socket, sockfd, and thread pointers are valid. Export sequence (stub-up) includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the client to provide access to the exported device. rx and tx threads depends on local and shared state to be correct and in sync. Unexport (stub-down) sequence shuts the socket down and stops the rx and tx threads. Stub-down sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current stub-up sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to SDEV_ST_USED. This opens up a race condition between the threads and usbip_sockfd_store() stub up and down handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold usbip_device lock to update local and shared states after creating rx and tx threads. - Update usbip_device status to SDEV_ST_USED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is a hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the stub-up sequence. Fixes: 9720b4bc ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by:
syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com> Reported-by:
syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/b1c08b983ffa185449c9f0f7d1021dc8c8454b60.1615171203.git.skhan@linuxfoundation.org Signed-off-by:
-
Shuah Khan authored
commit 718ad969 upstream. attach_store() is invoked when user requests import (attach) a device from usbip host. Attach and detach are governed by local state and shared state - Shared state (usbip device status) - Device status is used to manage the attach and detach operations on import-able devices. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - Device has to be in the right state to be attached and detached. Attach sequence includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the host to get access to the imported device. rx and tx threads depends on local and shared state to be correct and in sync. Detach sequence shuts the socket down and stops the rx and tx threads. Detach sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current attach sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to VDEV_ST_NOTASSIGNED. This opens up a race condition between the threads, port connect, and detach handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold vhci and usbip_device locks to update local and shared states after creating rx and tx threads. - Update usbip_device status to VDEV_ST_NOTASSIGNED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the attach sequence. - Update usbip_device tcp_rx and tcp_tx pointers holding vhci and usbip_device locks. Tested with syzbot reproducer: - https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000 Fixes: 9720b4bc ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by:
-
Shuah Khan authored
commit 9380afd6 upstream. usbip_sockfd_store() is invoked when user requests attach (import) detach (unimport) usb device from usbip host. vhci_hcd sends import request and usbip_sockfd_store() exports the device if it is free for export. Export and unexport are governed by local state and shared state - Shared state (usbip device status, sockfd) - sockfd and Device status are used to determine if stub should be brought up or shut down. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - While the device is exported, device status is marked used and socket, sockfd, and thread pointers are valid. Export sequence (stub-up) includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the client to provide access to the exported device. rx and tx threads depends on local and shared state to be correct and in sync. Unexport (stub-down) sequence shuts the socket down and stops the rx and tx threads. Stub-down sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current stub-up sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to SDEV_ST_USED. This opens up a race condition between the threads and usbip_sockfd_store() stub up and down handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold usbip_device lock to update local and shared states after creating rx and tx threads. - Update usbip_device status to SDEV_ST_USED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is a hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the stub-up sequence. Tested with syzbot reproducer: - https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000 Fixes: 9720b4bc ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by:
-
Shuah Khan authored
commit 6801854b upstream. Fix usbip_sockfd_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by:
-
Shuah Khan authored
commit f55a0571 upstream. Fix attach_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by:
-
Shuah Khan authored
commit 47ccc8fc upstream. Fix usbip_sockfd_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by:
-
Sebastian Reichel authored
commit 42213a01 upstream. GE CS1000 has some more custom USB IDs for CP2102N; add them to the driver to have working auto-probing. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Karan Singhal authored
commit ca667a33 upstream. IDs of nLight Air Adapter, Acuity Brands, Inc.: vid: 10c4 pid: 88d8 Signed-off-by:
Karan Singhal <karan.singhal@acuitybrands.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Niv Sardi authored
commit 5563b3b6 upstream. Add PID for CH340 that's found on cheap programmers. The driver works flawlessly as soon as the new PID (0x9986) is added to it. These look like ANU232MI but ship with a ch341 inside. They have no special identifiers (mine only has the string "DB9D20130716" printed on the PCB and nothing identifiable on the packaging. The merchant i bought it from doesn't sell these anymore). the lsusb -v output is: Bus 001 Device 009: ID 9986:7523 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x9986 idProduct 0x7523 bcdDevice 2.54 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength ...
-
Pavel Skripkin authored
commit cfdc67ac upstream. sysbot found memory leak in edge_startup(). The problem was that when an error was received from the usb_submit_urb(), nothing was cleaned up. Reported-by:
<syzbot+59f777bdcbdd7eea5305@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Cc: stable@vger.kernel.org # 2.6.21: c5c0c555 Signed-off-by:
-
Mathias Nyman authored
commit d26c00e7 upstream. If port terminations are detected in suspend, but link never reaches U0 then xHCI may have an internal uncleared wake state that will cause an immediate wake after suspend. This wake state is normally cleared when driver clears the PORT_CSC bit, which is set after a device is enabled and in U0. Write 1 to clear PORT_CSC for ports that don't have anything connected when suspending. This makes sure any pending internal wake states in xHCI are cleared. Cc: stable@vger.kernel.org Tested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210311115353.2137560-5-mathias.nyman@linux.intel.com Signed-off-by:
-
Forest Crossman authored
commit b71c669a upstream. I've confirmed that both the ASMedia ASM1042A and ASM3242 have the same problem as the ASM1142 and ASM2142/ASM3142, where they lose some of the upper bits of 64-bit DMA addresses. As with the other chips, this can cause problems on systems where the upper bits matter, and adding the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue. Cc: stable@vger.kernel.org Signed-off-by:
Forest Crossman <cyrozap@gmail.com> Signed-off-by:
-
Mathias Nyman authored
commit 253f588c upstream. A xHC USB 3 port might miss the first wake signal from a USB 3 device if the port LFPS reveiver isn't enabled fast enough after xHC resume. xHC host will anyway be resumed by a PME# signal, but will go back to suspend if no port activity is seen. The device resends the U3 LFPS wake signal after a 100ms delay, but by then host is already suspended, starting all over from the beginning of this issue. USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device needs to delay 100ms before resending the wake. Don't suspend immediately if port activity isn't detected in resume. Instead add a retry. If there is no port activity then delay for 120ms, and re-check for port activity. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit a4a251f8 upstream. On some systems rt2800usb and mt7601u devices are unable to operate since commit f8f80be5 ("xhci: Use soft retry to recover faster from transaction errors") Seems that some xHCI controllers can not perform Soft Retry correctly, affecting those devices. To avoid the problem add xhci->quirks flag that restore pre soft retry xhci behaviour for affected xHCI controllers. Currently those are AMD_PROMONTORYA_4 and AMD_PROMONTORYA_2, since it was confirmed by the users: on those xHCI hosts issue happen and is gone after disabling Soft Retry. [minor commit message rewording for checkpatch -Mathias] Fixes: f8f80be5 ("xhci: Use soft retry to recover faster from transaction errors") Cc: <stable@vger.kernel.org> # 4.20+ Reported-by:
Bernhard <bernhard.gebetsberger@gmx.at> Tested-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Yoshihiro Shimoda authored
commit b1d25e6e upstream. According to the datasheet, this controller has a restriction which "set an endpoint number so that combinations of the DIR bit and the EPNUM bits do not overlap.". However, since the udc core driver is possible to assign a bulk pipe as an interrupt endpoint, an endpoint number may not match the pipe number. After that, when user rebinds another gadget driver, this driver broke the restriction because the driver didn't clear any configuration in usb_ep_disable(). Example: # modprobe g_ncm Then, EP3 = pipe 3, EP4 = pipe 4, EP5 = pipe 6 # rmmod g_ncm # modprobe g_hid Then, EP3 = pipe 6, EP4 = pipe 7. So, pipe 3 and pipe 6 are set as EP3. So, clear PIPECFG register in usbhs_pipe_free(). Fixes: dfb87b8b ("usb: renesas_usbhs: gadget: fix re-enabling pipe without re-connecting") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1615168538-26101-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by:
-
Pete Zaitcev authored
commit 9de2c43a upstream. Apparently an application that opens a device and calls select() on it, will hang if the decice is disconnected. It's a little surprising that we had this bug for 15 years, but apparently nobody ever uses select() with a printer: only write() and read(), and those work fine. Well, you can also select() with a timeout. The fix is modeled after devio.c. A few other drivers check the condition first, then do not add the wait queue in case the device is disconnected. We doubt that's completely race-free. So, this patch adds the process first, then locks properly and checks for the disconnect. Reviewed-by:
Zqiang <qiang.zhang@windriver.com> Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303221053.1cf3313e@suzdal.zaitcev.lan Signed-off-by:
-
Matthias Kaehlcke authored
commit 2664deb0 upstream. The dwc3-qcom currently enables wakeup interrupts unconditionally when suspending, however this should not be done when wakeup is disabled (e.g. through the sysfs attribute power/wakeup). Only enable wakeup interrupts when device_may_wakeup() returns true. Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver") Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210302103659.v2.1.I44954d9e1169f2cf5c44e6454d357c75ddfa99a2@changeid Signed-off-by:
-
Serge Semin authored
commit 1cffb1c6 upstream. of_get_child_by_name() increments the reference counter of the OF node it managed to find. So after the code is done using the device node, the refcount must be decremented. Add missing of_node_put() invocation then to the dwc3_qcom_of_register_core() method, since DWC3 OF node is being used only there. Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver") Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20210212205521.14280-1-Sergey.Semin@baikalelectronics.ru Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
