Forum | Documentation | Website | Blog

Skip to content
Snippets Groups Projects
  1. Apr 21, 2012
    • Wolfgang Denk's avatar
      Prepare v2012.04 · 2790bf69
      Wolfgang Denk authored
      
      Also tiny style cleanup to tools/patman/README
      
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      v2012.04
      2790bf69
    • Stephan Linz's avatar
      net: ll_temac: drop obsolete "NAMESIZE" define · 34921d04
      Stephan Linz authored
      ... after commit "net/miiphy/serial: drop duplicate NAMESIZE
      define" (sha1:f6add132
      
      ) was applied. The building of the new
      LL TEMAC network driver fails with error below:
      
      xilinx_ll_temac.c: In function 'xilinx_ll_temac_initialize':
      xilinx_ll_temac.c:301: error: 'NAMESIZE' undeclared (first use in this function)
      xilinx_ll_temac.c:301: error: (Each undeclared identifier is reported only once
      xilinx_ll_temac.c:301: error: for each function it appears in.)
      
      Signed-off-by: default avatarStephan Linz <linz@li-pro.net>
      Acked-by: default avatarMike Frysinger <vapier@gentoo.org>
      34921d04
    • Simon Glass's avatar
      Add 'patman' patch generation, checking and submission script · 0d24de9d
      Simon Glass authored
      
      What is this?
      
      =============
      
      This tool is a Python script which:
      - Creates patch directly from your branch
      - Cleans them up by removing unwanted tags
      - Inserts a cover letter with change lists
      - Runs the patches through checkpatch.pl and its own checks
      - Optionally emails them out to selected people
      
      It is intended to automate patch creation and make it a less
      error-prone process. It is useful for U-Boot and Linux work so far,
      since it uses the checkpatch.pl script.
      
      It is configured almost entirely by tags it finds in your commits.
      This means that you can work on a number of different branches at
      once, and keep the settings with each branch rather than having to
      git format-patch, git send-email, etc. with the correct parameters
      each time. So for example if you put:
      
      in one of your commits, the series will be sent there.
      
      See the README file for full details.
      END
      
      Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
      0d24de9d
    • Jens Scharsig's avatar
      0d62032e
    • Dirk Behme's avatar
      mmc: Fix warning if CONFIG_MMC_TRACE is enabled · 146bec79
      Dirk Behme authored
      
      Fix the warning
      
      mmc.c: In function 'mmc_send_cmd':
      mmc.c:87: warning: assignment from incompatible pointer type
      
      in case CONFIG_MMC_TRACE is enabled.
      
      Signed-off-by: default avatarDirk Behme <dirk.behme@de.bosch.com>
      CC: Andy Fleming <afleming@freescale.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      Acked-by: default avatarMarek Vasut <marex@denx.de>
      146bec79
    • Jeroen Hofstee's avatar
      ehci-omap: fix for enabling the correct usb port · 90579fdd
      Jeroen Hofstee authored
      This is just a patch for the problem reported here:
      http://lists.denx.de/pipermail/u-boot/2012-February/117580.html
      
       originally reported by Igor.
      
      "Looks like this is copy paste error from my side,(for port2/3 it should have been bypass
       for port2/3 rather its port1 set in bypass mode)"
      
      I only submit the patch since it is missing in 2012.04-rc3 while the twister board
      depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
      
      note: the twister boards still needs an additional `usb reset`, don't know why.
      
      U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
      
      AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz
      TAM3517 TWISTER Board + LPDDR/NAND
      I2C:   ready
      DRAM:  256 MiB
      NAND:  512 MiB
      MMC:   OMAP SD/MMC: 0
      In:    serial
      Out:   serial
      Err:   serial
      Die ID #746c0000000000000155dc1405011024
      Net:   DaVinci-EMAC, smc911x-0
      Hit any key to stop autoboot:  0
      twister => usb start
      (Re)start USB...
      USB:   Register 1313 NbrPorts 3
      USB EHCI 1.00
      scanning bus for devices... 1 USB Device(s) found
             scanning bus for storage devices... 0 Storage Device(s) found
      twister => usb reset
      (Re)start USB...
      USB:   Register 1313 NbrPorts 3
      USB EHCI 1.00
      scanning bus for devices... 1 USB Device(s) found
             scanning bus for storage devices... 0 Storage Device(s) found
      twister => usb reset
      (Re)start USB...
      USB:   Register 1313 NbrPorts 3
      USB EHCI 1.00
      scanning bus for devices... 1 USB Device(s) found
             scanning bus for storage devices... 0 Storage Device(s) found
      twister => usb reset
      (Re)start USB...
      USB:   Register 1313 NbrPorts 3
      USB EHCI 1.00
      scanning bus for devices... 1 USB Device(s) found
             scanning bus for storage devices... 0 Storage Device(s) found
      
      Signed-off-by: default avatarJeroen Hofstee <jeroen@myspectrum.nl>
      Acked-by: Govindraj.R <govindraj.raja <at> ti.com>
      Acked-by: default avatarTom Rini <trini@ti.com>
      90579fdd
    • Wolfgang Denk's avatar
      fdt: avoid bad MAKEALL status · 896bbb53
      Wolfgang Denk authored
      
      Current versions of  dtc  always print a message like
      
      	DTC: dts->dtb  on file "dt.dtb.tmp"
      
      which cannot even be suppressed with "-qqq".  To avoid incorrect
      MAKEALL status, we manually filter out this message.  This is a bit
      complicated, as we have to make sure to set a correct return code.
      
      Also, get rid of the temp file: dtc accepts "-" for stdin.
      
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Simon Glass <sjg@chromium.org>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      896bbb53
    • Wolfgang Denk's avatar
      fdt: fix out of tree builds with DT support · 82f45866
      Wolfgang Denk authored
      
      Fix: FATAL ERROR: Couldn't open "../arch/arm/dts/tegra20.dtsi": No
      such file or directory
      
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Simon Glass <sjg@chromium.org>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      82f45866
    • Wolfgang Denk's avatar
      GCC4.6: Squash warnings in onenand_base.c · 1432c763
      Wolfgang Denk authored
      
      Fix gcc 4.6 build warnings:
      onenand_base.c: In function 'onenand_probe':
      onenand_base.c:2577:6: warning: variable 'maf_id' set but not used
      [-Wunused-but-set-variable]
      
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Cc: Lukasz Majewski <l.majewski@samsung.com>
      Cc: Kyungmin Park <kyungmin.park@samsung.com>
      Tested-by: default avatarLukasz Majewski <l.majewski@samsung.com>
      1432c763
  2. Apr 18, 2012
  3. Apr 17, 2012
  4. Apr 16, 2012