Maciej Fijalkowski says:

====================

Hello,

yet another fixes for XSK from Magnus and me.

Magnus addresses the fact that xp_alloc() can return NULL, so this needs
to be handled to avoid clearing entries in the SW ring on driver side.
Then he addresses the off-by-one problem in Tx desc cleaning routine for
ice ZC driver.

From my side, I am adding protection to ZC Rx processing loop so that
cleaning of descriptors wouldn't go over already processed entries.
Then I also fix an issue with assigning XSK pool to Tx queues.

This is directed to bpf tree.

Thanks!

Maciej Fijalkowski (2):
  ice: xsk: stop Rx processing when ntc catches ntu
  ice: xsk: fix indexing in ice_tx_xsk_pool()
====================

Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Ice driver tries to always create XDP rings array to be
num_possible_cpus() sized, regardless of user's queue count setting that
can be changed via ethtool -L for example.

Currently, ice_tx_xsk_pool() calculates the qid by decrementing the
ring->q_index by the count of XDP queues, but ring->q_index is set to 'i
+ vsi->alloc_txq'.

When user did ethtool -L $IFACE combined 1, alloc_txq is 1, but
vsi->num_xdp_txq is still num_possible_cpus(). Then, ice_tx_xsk_pool()
will do OOB access and in the final result ring would not get xsk_pool
pointer assigned. Then, each ice_xsk_wakeup() call will fail with error
and it will not be possible to get into NAPI and do the processing from
driver side.

Fix this by decrementing vsi->alloc_txq instead of vsi->num_xdp_txq from
ring-q_index in ice_tx_xsk_pool() so the calculation is reflected to the
setting of ring->q_index.

Fixes: 22bf877e

 ("ice: introduce XDP_TX fallback path")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-5-maciej.fijalkowski@intel.com

This can happen with big budget values and some breakage of re-filling
descriptors as we do not clear the entry that ntu is pointing at the end
of ice_alloc_rx_bufs_zc. So if ntc is at ntu then it might be the case
that status_error0 has an old, uncleared value and ntc would go over
with processing which would result in false results.

Break Rx loop when ntc == ntu to avoid broken behavior.

Fixes: 3876ff52

 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-4-maciej.fijalkowski@intel.com

The NIC Tx ring completion routine cleans entries from the ring in
batches. However, it processes one more batch than it is supposed
to. Note that this does not matter from a functionality point of view
since it will not find a set DD bit for the next batch and just exit
the loop. But from a performance perspective, it is faster to
terminate the loop before and not issue an expensive read over PCIe to
get the DD bit.

Fixes: 126cdfe1

 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-3-maciej.fijalkowski@intel.com

For the case when xp_alloc_batch() is used but the batched allocation
cannot be used, there is a slow path that uses the non-batched
xp_alloc(). When it fails to allocate an entry, it returns NULL. The
current code wrote this NULL into the entry of the provided results
array (pointer to the driver SW ring usually) and returned. This might
not be what the driver expects and to make things simpler, just write
successfully allocated xdp_buffs into the SW ring,. The driver might
have information in there that is still important after an allocation
failure.

Note that at this point in time, there are no drivers using
xp_alloc_batch() that could trigger this slow path. But one might get
added.

Fixes: 47e4075d

 ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-2-maciej.fijalkowski@intel.com

Masami Hiramatsu says:

====================
Here are the 3rd version for generic kretprobe and kretprobe on x86 for
replacing the kretprobe trampoline with rethook. The previous version
is here[1]

[1] https://lore.kernel.org/all/164821817332.2373735.12048266953420821089.stgit@devnote2/T/#u

This version fixed typo and build issues for bpf-next and CONFIG_RETHOOK=y
error. I also add temporary mitigation lines for ANNOTATE_NOENDBR macro
issue for bpf-next tree [2/4].

This will be removed after merging kernel IBT series.

Background:

This rethook came from Jiri's request of multiple kprobe for bpf[2].
He tried to solve an issue that starting bpf with multiple kprobe will
take a long time because bpf-kprobe will wait for RCU grace period for
sync rcu events.

Jiri wanted to attach a single bpf handler to multiple kprobes and
he tried to introduce multiple-probe interface to kprobe. So I asked
him to use ftrace and kretprobe-like hook if it is only for the
function entry and exit, instead of adding ad-hoc interface
to kprobes.
For this purpose, I introduced the fprobe (kprobe like interface for
ftrace) with the rethook (this is a generic return hook feature for
fprobe exit handler)[3].

[2] https://lore.kernel.org/all/20220104080943.113249-1-jolsa@kernel.org/T/#u
[3] https://lore.kernel.org/all/164191321766.806991.7930388561276940676.stgit@devnote2/T/#u



The rethook is basically same as the kretprobe trampoline. I just made
it decoupled from kprobes. Eventually, the all arch dependent kretprobe
trampolines will be replaced with the rethook trampoline instead of
cloning and set HAVE_RETHOOK=y.
When I port the rethook for all arch which supports kretprobe, the
legacy kretprobe specific code (which is for CONFIG_KRETPROBE_ON_RETHOOK=n)
will be removed eventually.
====================

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently the optprobe trampoline template code ganerate an
almost complete pt_regs on-stack, everything except regs->ss.
The 'regs->ss' points to the top of stack, which is not a
valid segment decriptor.

As same as the rethook does, complete the job by also pushing ss.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164826166027.2455864.14759128090648961900.stgit@devnote2

Currently arch_rethook_trampoline() generates an almost complete
pt_regs on-stack, everything except regs->ss that is, that currently
points to the fake return address, which is not a valid segment
descriptor.

Since interpretation of regs->[sb]p should be done in the context of
regs->ss, and we have code actually doing that (see
arch/x86/lib/insn-eval.c for instance), complete the job by also
pushing ss.

This ensures that anybody who does do look at regs->ss doesn't
mysteriously malfunction, avoiding much future pain.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/164826164851.2455864.17272661073069737350.stgit@devnote2

Replaces the kretprobe code with rethook on x86. With this patch,
kretprobe on x86 uses the rethook instead of kretprobe specific
trampoline code.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/164826163692.2455864.13745421016848209527.stgit@devnote2

Use rethook for kretprobe function return hooking if the arch sets
CONFIG_HAVE_RETHOOK=y. In this case, CONFIG_KRETPROBE_ON_RETHOOK is
set to 'y' automatically, and the kretprobe internal data fields
switches to use rethook. If not, it continues to use kretprobe
specific function return hooks.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164826162556.2455864.12255833167233452047.stgit@devnote2

Arnaldo reported perf compilation fail with:

  $ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 PYTHON=python3
  ...
  In file included from util/bpf_counter.c:28:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h: In function ‘bperf_leader_bpf__assert’:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h:351:51: error: unused parameter ‘s’ [-Werror=unused-parameter]
    351 | bperf_leader_bpf__assert(struct bperf_leader_bpf *s)
        |                          ~~~~~~~~~~~~~~~~~~~~~~~~~^
  cc1: all warnings being treated as errors

If there's nothing to generate in the new assert function,
we will get unused 's' warn/error, adding 'unused' attribute to it.

Fixes: 08d4dba6

 ("bpftool: Bpf skeletons assert type sizes")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220328083703.2880079-1-jolsa@kernel.org

14c17463

 ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.

Fix breakage by switching to kprobing urandom_read() function.

Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org

Since the m->arg_size array can hold up to MAX_BPF_FUNC_ARGS argument
sizes, it's ok that nargs is equal to MAX_BPF_FUNC_ARGS.

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220324164238.1274915-1-ytcoode@gmail.com

Commit ee2a0988 missed updating the comments for helper bpf_get_stack
in tools/include/uapi/linux/bpf.h. Sync it.

Fixes: ee2a0988

 ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ce54617746b7ed5e9ba3b844e55e74cb8a60e0b5.1648110794.git.geliang.tang@suse.com

Masami Hiramatsu says:

====================

Hi,

These fprobe patches are for fixing the warnings by Smatch and sparse.
This is arch independent part of the fixes.

Thank you,
---
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since ftrace_ops::local_hash::filter_hash field is an __rcu pointer,
we have to use rcu_access_pointer() to access it.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164802093635.1732982.4938094876018890866.stgit@devnote2

Fix the type mismatching warning of 'rethook_node vs fprobe_rethook_node'
found by Smatch.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164802092611.1732982.12268174743437084619.stgit@devnote2

In [1], we added a kconfig knob that can set
/proc/sys/kernel/unprivileged_bpf_disabled to 2

We now check against this value in bpftool feature probe

[1] https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net



Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220322145012.1315376-1-milan@mdaverde.com

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - llc: only change llc->dev when bind() succeeds, fix null-deref

  Current release - new code bugs:

   - smc: fix a memory leak in smc_sysctl_net_exit()

   - dsa: realtek: make interface drivers depend on OF

  Previous releases - regressions:

   - sched: act_ct: fix ref leak when switching zones

  Previous releases - always broken:

   - netfilter: egress: report interface as outgoing

   - vsock/virtio: enable VQs early on probe and finish the setup before
     using them

  Misc:

   - memcg: enable accounting for nft objects"

* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
  Revert "selftests: net: Add tls config dependency for tls selftests"
  net/smc: Send out the remaining data in sndbuf before close
  net: move net_unlink_todo() out of the header
  net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
  net: bnxt_ptp: fix compilation error
  selftests: net: Add tls config dependency for tls selftests
  memcg: enable accounting for nft objects
  net/sched: act_ct: fix ref leak when switching zones
  net/smc: fix a memory leak in smc_sysctl_net_exit()
  selftests: tls: skip cmsg_to_pipe tests with TLS=n
  octeontx2-af: initialize action variable
  net: sparx5: switchdev: fix possible NULL pointer dereference
  net/x25: Fix null-ptr-deref caused by x25_disconnect
  qlcnic: dcb: default to returning -EOPNOTSUPP
  net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
  net: hns3: fix phy can not link up when autoneg off and reset
  net: hns3: add NULL pointer check for hns3_set/get_ringparam()
  net: hns3: add netdev reset check for hns3_set_tunable()
  net: hns3: clean residual vf config after disable sriov
  net: hns3: add max order judgement for tx spare buffer
  ...

This reverts commit d9142e1c.

The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.

Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Fixes: d9142e1c

 ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The current autocork algorithms will delay the data transmission
in BH context to smc_release_cb() when sock_lock is hold by user.

So there is a possibility that when connection is being actively
closed (sock_lock is hold by user now), some corked data still
remains in sndbuf, waiting to be sent by smc_release_cb(). This
will cause:

- smc_close_stream_wait(), which is called under the sock_lock,
  has a high probability of timeout because data transmission is
  delayed until sock_lock is released.

- Unexpected data sends may happen after connction closed and use
  the rtoken which has been deleted by remote peer through
  LLC_DELETE_RKEY messages.

So this patch will try to send out the remaining corked data in
sndbuf before active close process, to ensure data integrity and
avoid unexpected data transmission after close.

Reported-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Fixes: 6b88af83

 ("net/smc: don't send in the BH context if sock_owned_by_user")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1648447836-111521-1-git-send-email-guwen@linux.alibaba.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kgdb update from Daniel Thompson:
 "Only a single patch this cycle. Fix an obvious mistake with the kdb
  memory accessors.

  It was a stupid mistake (to/from backwards) but it has been there for
  a long time since many architectures tolerated it with surprisingly
  good grace"

* tag 'kgdb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Fix the putarea helper function

Pull hexagon update from Brian Cain:
 "Maintainer email update"

* tag 'hexagon-5.18-0' of git://git.kernel.org/pub/scm/linux/kernel/git/bcain/linux:
  MAINTAINERS: update hexagon maintainer email, tree

Pull microblaze updates from Michal Simek:

 - Small fixups

 - Remove unused pci_phys_mem_access_prot()

* tag 'microblaze-v5.18' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Remove pci_phys_mem_access_prot() dead code
  microblaze: add const to of_device_id
  microblaze: fix typo in a comment

There's no reason for this to be in netdevice.h, it's all
just used in dev.c. Also make it no longer inline and let
the compiler decide to do that by itself.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220325225023.f49b9056fe1c.I6b901a2df00000837a9bd251a8dd259bd23f5ded@changeid


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The bug is here:
	return rule;

The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, return 'rule' when found, otherwise return NULL.

Fixes: ae7a5aff

 ("net: dsa: bcm_sf2: Keep copy of inserted rules")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220328032431.22538-1-xiam0nd.tong@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Forced transitions block only to-be-removed livepatches [Chengming]

 - Detect when ftrace handler could not be disabled in self-tests [David]

 - Calm down warning from a static analyzer [Tom]

* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Reorder to use before freeing a pointer
  livepatch: Don't block removal of patches that are safe to unload
  livepatch: Skip livepatch tests if ftrace cannot be configured

Pull xen updates from Juergen Gross:

 - A bunch of minor cleanups

 - A fix for kexec in Xen dom0 when executed on a high cpu number

 - A fix for resuming after suspend of a Xen guest with assigned PCI
   devices

 - A fix for a crash due to not disabled preemption when resuming as Xen
   dom0

* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: fix is_xen_pmu()
  xen: don't hang when resuming PCI device
  arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
  xen/grant-table: remove readonly parameter from functions
  xen/grant-table: remove gnttab_*transfer*() functions
  drivers/xen: use helper macro __ATTR_RW
  x86/xen: Fix kerneldoc warning
  xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
  xen: use time_is_before_eq_jiffies() instead of open coding it

Some email infrastructure changes required this switch.

Signed-off-by: Brian Cain <bcain@quicinc.com>

The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:

drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
  400 |  ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
      |  ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
   75 |         struct pps_pin pins[BNXT_MAX_TSIO_PINS];
      |                        ^~~~
cc1: all warnings being treated as errors

This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.

Cc: <stable@vger.kernel.org>
Fixes: 9e518f25

 ("bnxt_en: 1PPS functions to configure TSIO pins")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220328062708.207079-1-damien.lemoal@opensource.wdc.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver changes for 5.18-rc1.

  Nothing major, some more good cleanups from Jiri and 2 new serial
  drivers. Highlights include:

   - termbits cleanups

   - export symbol cleanups and other core cleanups from Jiri Slaby

   - new sunplus and mvebu uart drivers (amazing that people are still
     creating new uarts...)

   - samsung serial driver cleanups

   - ldisc 29 is now "reserved" for experimental/development line
     disciplines

   - lots of other tiny fixes and cleanups to serial drivers and
     bindings

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
  vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
  serial: 8250: fix XOFF/XON sending when DMA is used
  tty: serial: samsung: Add ARTPEC-8 support
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  serial: sc16is7xx: Clear RS485 bits in the shutdown
  tty: serial: samsung: simplify getting OF match data
  tty: serial: samsung: constify variables and pointers
  tty: serial: samsung: constify s3c24xx_serial_drv_data members
  tty: serial: samsung: constify UART name
  tty: serial: samsung: constify s3c24xx_serial_drv_data
  tty: serial: samsung: reduce number of casts
  tty: serial: samsung: embed s3c2410_uartcfg in parent structure
  tty: serial: samsung: embed s3c24xx_uart_info in parent structure
  serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
  tty: serial: bcm63xx: use more precise Kconfig symbol
  serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
  tty: serial: jsm: fix two assignments in if conditions
  tty: serial: jsm: remove redundant assignments to variable linestatus
  serial: 8250_mtk: make two read-only arrays static const
  serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 5.18-rc1.

  Loads of tiny cleanups for almost all staging drivers in here, nothing
  major at all. Highlights include:

   - remove the ashmem Android driver. It is long-dead and if there are
     any legacy userspace applications still using it, the Android
     kernel images will maintain it, the community shouldn't care about
     it anymore

   - wfx wifi driver major cleanups. Should be ready to merge out of
     staging soon, and will coordinate with the wifi maintainers after
     -rc1 is out

   - major cleanups and unwinding of the layers of the r8188eu driver.
     It's amazing just how many unneeded layers of abstraction is in
     there, just when we think it's done, another is found...

   - lots of tiny coding style cleanups in many other staging drivers.

  All have been in linux-next for a while with no reported problems"

* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
  staging: r8188eu: remove unnecessary memset in r8188eu
  staging: greybus: introduce pwm_ops::apply
  staging: rts5208: Resolve checkpatch.pl issues.
  staging: sm750fb: fix naming style
  staging: fbtft: Consider type of init sequence values in fbtft_init_display()
  staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
  staging: mmal-vchiq: clear redundant item named bulk_scratch
  mips: dts: ralink: add MT7621 SoC
  staging: r8188eu: remove some unused local ieee80211 macros
  staging: r8188eu: make rtl8188e_process_phy_info static
  staging: r8188eu: remove unused function prototype
  staging: r8188eu: remove three unused receive defines
  staging: r8188eu: remove unnecessary initializations
  staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
  MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
  staging: r8188eu: proper error handling in rtw_init_drv_sw
  staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
  staging: vt6656: Removed unused variable vt3342_vnt_threshold
  staging: vt6656: Removed unused variable bb_vga_0
  staging: remove ashmem
  ...

Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.18-rc1.

  Not much here, primarily it was a bunch of cleanups and small updates:

   - kobj_type cleanups for default_groups

   - documentation updates

   - firmware loader minor changes

   - component common helper added and take advantage of it in many
     drivers (the largest part of this pull request).

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  Documentation: update stable review cycle documentation
  drivers/base/dd.c : Remove the initial value of the global variable
  Documentation: update stable tree link
  Documentation: add link to stable release candidate tree
  devres: fix typos in comments
  Documentation: add note block surrounding security patch note
  s...

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Pro...

Pull pin control updates from Linus Walleij:
 "No core changes this time. Just new driver code and improvements!

  New drivers:

   - New driver for the Broadcom BCM4908 SoC.

   - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
     of the Samsung Exynos pin control driver.

   - New driver for the Amlogic Meson S4 SoC.

   - New driver for the Sunplus SP7021 SoC.

   - New driver for the Microsemi Ocelot family ServalT SoC.

   - New subdriver for Intel Alder Lake-M SoC.

   - New subdriver for Intel Ice Lake-N SoC, including PCH support.

   - New subdriver for Renesas R8A779F0 SoC.

   - New subdriver for Mediatek MT8186 SoC.

   - New subdriver for NXP Freescale i.MX93 SoC.

   - New driver for Nuvoton WPCM450 SoC.

   - New driver for Qualcomm SC8280XP SoC.

  Improvements:

   - Wakeup support on Samsung Exynos850 and ExynosAutov9.

   - Serious and voluminous maintenance cleanup and refactoring in the
     Renesas drivers. Mainly sharing similar data between the different
     SoC subdrivers.

   - Qualcomm SM8450 EGPIO support.

   - Drive strength support on the Mediatek MT8195.

   - Add some missing groups and functions to the Ralink RT2880"

* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
  pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
  pinctrl: nuvoton: wpcm450: Fix build error without OF
  pinctrl: qcom-pmic-gpio: Add support for pm8450
  dt-bindings: pinctrl: aspeed: Update gfx node in example
  dt-bindings: pinctrl: rt2880: add missing pin groups and functions
  pinctrl: ingenic: Fix regmap on X series SoCs
  pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
  pinctrl: nuvoton: Fix sparse warning
  pinctrl: mediatek: mt8186: Account for probe refactoring
  pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
  pinctrl: mediatek: common-v1: Commonize spec_pupd callback
  pinctrl: mediatek: common-v1: Use common probe function
  pinctrl: mediatek: common-v1: Add common probe function
  pinctrl: mediatek: paris: Unify probe function by using OF match data
  pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
  pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
  pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
  pinctrl: qcom: Introduce sc8280xp TLMM driver
  ...

Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better.  

And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.

So let's reinstate the cleanups from commit aa6f8dcb ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.

Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/

 [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
  - CONFIG_TLS=m

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Incorrect output device in nf_egress hook, from Phill Sutter.

2) Preserve liberal flag in TCP conntrack state, reported by Sven Auhagen.

3) Use GFP_KERNEL_ACCOUNT flag for nf_tables objects, from Vasily Averin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nftables replaces iptables, but it lacks memcg accounting.

This patch account most of the memory allocation associated with nft
and should protect the host from misusing nft inside a memcg restricted
container.

Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>