Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.11

First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.

Major changes:

rtw88
 * major bluetooth co-existance improvements
wilc1000
 * Wi-Fi Multimedia (WMM) support
ath11k
 * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
   probe response support
 * qcom,ath11k-calibration-variant Device Tree setting
 * cold boot calibration support
 * new DFS region: JP
wnc36xx
 * enable connection monitoring and keepalive in firmware
ath10k
 * firmware IRAM recovery feature
mhi
 * merge mhi-ath11k-immutable branch to make MHI API change go smoothly

* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
  wl1251: remove trailing semicolon in macro definition
  airo: remove trailing semicolon in macro definition
  wilc1000: added queue support for WMM
  wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
  wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
  wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
  wilc1000: added 'ndo_set_mac_address' callback support
  brcmfmac: expose firmware config files through modinfo
  wlcore: Switch to using the new API kobj_to_dev()
  rtw88: coex: add feature to enhance HID coexistence performance
  rtw88: coex: upgrade coexistence A2DP mechanism
  rtw88: coex: add action for coexistence in hardware initial
  rtw88: coex: add function to avoid cck lock
  rtw88: coex: change the coexistence mechanism for WLAN connected
  rtw88: coex: change the coexistence mechanism for HID
  rtw88: coex: update AFH information while in free-run mode
  rtw88: coex: update the mechanism for A2DP + PAN
  rtw88: coex: add debug message
  rtw88: coex: run coexistence when WLAN entering/leaving LPS
  Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
  ...
====================

Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When building FSL_DPAA_ETH the following build error shows up:

/tmp/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function ‘dpaa_fq_init’:
/tmp/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1135:9: error: too few arguments to function ‘xdp_rxq_info_reg’
 1135 |   err = xdp_rxq_info_reg(&dpaa_fq->xdp_rxq, dpaa_fq->net_dev,
      |         ^~~~~~~~~~~~~~~~

Commit b02e5a0e ("xsk: Propagate napi_id to XDP socket Rx path")
added an extra argument to function xdp_rxq_info_reg and commit
d57e57d0

 ("dpaa_eth: add XDP_TX support") didn't know about that
extra argument.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20201203144343.790719-1-anders.roxell@linaro.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-12-03

The main changes are:

1) Support BTF in kernel modules, from Andrii.

2) Introduce preferred busy-polling, from Björn.

3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.

4) Memcg-based memory accounting for bpf objects, from Roman.

5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
  selftests/bpf: Fix invalid use of strncat in test_sockmap
  libbpf: Use memcpy instead of strncpy to please GCC
  selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
  selftests/bpf: Add tp_btf CO-RE reloc test for modules
  libbpf: Support attachment of BPF tracing programs to kernel modules
  libbpf: Factor out low-level BPF program loading helper
  bpf: Allow to specify kernel module BTFs when attaching BPF programs
  bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
  selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
  selftests/bpf: Add support for marking sub-tests as skipped
  selftests/bpf: Add bpf_testmod kernel module for testing
  libbpf: Add kernel module BTF support for CO-RE relocations
  libbpf: Refactor CO-RE relocs to not assume a single BTF object
  libbpf: Add internal helper to load BTF data by FD
  bpf: Keep module's btf_data_size intact after load
  bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
  selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
  bpf: Adds support for setting window clamp
  samples/bpf: Fix spelling mistake "recieving" -> "receiving"
  bpf: Fix cold build of test_progs-no_alu32
  ...
====================

Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

strncat()'s third argument is how many bytes will be added *in addition* to
already existing bytes in destination. Plus extra zero byte will be added
after that. So existing use in test_sockmap has many opportunities to overflow
the string and cause memory corruptions. And in this case, GCC complains for
a good reason.

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Fixes: 73563aa3 ("selftests/bpf: test_sockmap, print additional test options")
Fixes: 1ade9aba ("bpf: test_sockmap, add options for msg_pop_data() helper")
Fixes: 463bac5f ("bpf, selftests: Add test for ktls with skb bpf ingress policy")
Fixes: e9dd9047 ("bpf: add tls support for testing in test_sockmap")
Fixes: 753fb2ee

 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org

Some versions of GCC are really nit-picky about strncpy() use. Use memcpy(),
as they are pretty much equivalent for the case of fixed length strings.

Fixes: e459f49b

 ("libbpf: Separate XDP program load with xsk socket creation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-1-andrii@kernel.org

Andrii Nakryiko says:

====================

This patch sets extends kernel and libbpf with support for attaching
BTF-powered raw tracepoint (tp_btf) and tracing (fentry/fexit/fmod_ret/lsm)
BPF programs to BPF hooks defined in kernel modules. As part of that, libbpf
now supports performing CO-RE relocations against types in kernel module BTFs,
in addition to existing vmlinux BTF support.

Kernel UAPI for BPF_PROG_LOAD now allows to specify kernel module (or vmlinux)
BTF object FD in attach_btf_obj_fd field, aliased to attach_prog_fd. This is
used to identify which BTF object needs to be used for finding BTF type by
provided attach_btf_id.

This patch set also sets up a convenient and fully-controlled custom kernel
module (called "bpf_testmod"), that is a predictable playground for all the
BPF selftests, that rely on module BTFs. Currently pahole doesn't generate
BTF_KIND_FUNC info for ftrace-able static functions in kernel modules, so
expose traced function in bpf_sidecar.ko. Once pahole is enhanced, we can go
back to static function.

From end user perspective there are no extra actions that need to happen.
Libbpf will continue searching across all kernel module BTFs, if desired
attach BTF type is not found in vmlinux. That way it doesn't matter if BPF
hook that user is trying to attach to is built into vmlinux image or is
loaded in kernel module.

v5->v6:
  - move btf_put() back to syscall.c (kernel test robot);
  - added close(fd) in patch #5 (John);
v4->v5:
  - use FD to specify BTF object (Alexei);
  - move prog->aux->attach_btf putting into bpf_prog_free() for consistency
    with putting prog->aux->dst_prog;
  - fix BTF FD leak(s) in libbpf;
v3->v4:
  - merge together patch sets [0] and [1];
  - avoid increasing bpf_reg_state by reordering fields (Alexei);
  - preserve btf_data_size in struct module;
v2->v3:
  - fix subtle uninitialized variable use in BTF ID iteration code;
v1->v2:
  - module_put() inside preempt_disable() region (Alexei);
  - bpf_sidecar -> bpf_testmod rename (Alexei);
  - test_progs more relaxed handling of bpf_testmod;
  - test_progs marks skipped sub-tests properly as SKIP now.

  [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=393677&state=*
  [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=393679&state=*


====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add new selftest checking attachment of fentry/fexit/fmod_ret (and raw
tracepoint ones for completeness) BPF programs to kernel module function.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-15-andrii@kernel.org

Add another CO-RE relocation test for kernel module relocations. This time for
tp_btf with direct memory reads.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-14-andrii@kernel.org

Teach libbpf to search for BTF types in kernel modules for tracing BPF
programs. This allows attachment of raw_tp/fentry/fexit/fmod_ret/etc BPF
program types to tracepoints and functions in kernel modules.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-13-andrii@kernel.org

Refactor low-level API for BPF program loading to not rely on public API
types. This allows painless extension without constant efforts to cleverly not
break backwards compatibility.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-12-andrii@kernel.org

Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org

Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.

This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.

Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.

Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org

Add a self-tests validating libbpf is able to perform CO-RE relocations
against the type defined in kernel module BTF. if bpf_testmod.o is not
supported by the kernel (e.g., due to version mismatch), skip tests, instead
of failing.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-9-andrii@kernel.org

Previously skipped sub-tests would be counted as passing with ":OK" appened
in the log. Change that to be accounted as ":SKIP".

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-8-andrii@kernel.org

Add bpf_testmod module, which is conceptually out-of-tree module and provides
ways for selftests/bpf to test various kernel module-related functionality:
raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by
test_progs test runner and expected by some of selftests to be present and
loaded.

Pahole currently isn't able to generate BTF for static functions in kernel
modules, so make sure traced function is global.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org

Teach libbpf to search for candidate types for CO-RE relocations across kernel
modules BTFs, in addition to vmlinux BTF. If at least one candidate type is
found in vmlinux BTF, kernel module BTFs are not iterated. If vmlinux BTF has
no matching candidates, then find all kernel module BTFs and search for all
matching candidates across all of them.

Kernel's support for module BTFs are inferred from the support for BTF name
pointer in BPF UAPI.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-6-andrii@kernel.org

Refactor CO-RE relocation candidate search to not expect a single BTF, rather
return all candidate types with their corresponding BTF objects. This will
allow to extend CO-RE relocations to accommodate kernel module BTFs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-5-andrii@kernel.org

Add a btf_get_from_fd() helper, which constructs struct btf from in-kernel BTF
data by FD. This is used for loading module BTFs.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-4-andrii@kernel.org

Having real btf_data_size stored in struct module is benefitial to quickly
determine which kernel modules have associated BTF object and which don't.
There is no harm in keeping this info, as opposed to keeping invalid pointer.

Fixes: 607c543f

 ("bpf: Sanitize BTF data pointer after module is loaded")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-3-andrii@kernel.org

__module_address() needs to be called with preemption disabled or with
module_mutex taken. preempt_disable() is enough for read-only uses, which is
what this fix does. Also, module_put() does internal check for NULL, so drop
it as well.

Fixes: a38d1107

 ("bpf: support raw tracepoints in modules")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-2-andrii@kernel.org

Prankur gupta says:

====================

This patch contains support to set tcp window_field field from bpf setsockops.

v2: Used TCP_WINDOW_CLAMP setsockopt logic for bpf_setsockopt (review comment addressed)

v3: Created a common function for duplicated code (review comment addressed)

v4: Removing logic to pass struct sock and struct tcp_sock together (review comment addressed)
====================

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adding selftests for new added functionality to set TCP_WINDOW_CLAMP
from bpf setsockopt.

Signed-off-by: Prankur gupta <prankgup@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202213152.435886-3-prankgup@fb.com

Adds a new bpf_setsockopt for TCP sockets, TCP_BPF_WINDOW_CLAMP,
which sets the maximum receiver window size. It will be useful for
limiting receiver window based on RTT.

Signed-off-by: Prankur gupta <prankgup@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202213152.435886-2-prankgup@fb.com

Conflicts:
	drivers/net/ethernet/ibm/ibmvnic.c

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc7, including fixes from bpf, netfilter,
  wireless drivers, wireless mesh and can.

  Current release - regressions:

   - mt76: usb: fix crash on device removal

  Current release - always broken:

   - xsk: Fix umem cleanup from wrong context in socket destruct

  Previous release - regressions:

   - net: ip6_gre: set dev->hard_header_len when using header_ops

   - ipv4: Fix TOS mask in inet_rtm_getroute()

   - net, xsk: Avoid taking multiple skbuff references

  Previous release - always broken:

   - net/x25: prevent a couple of overflows

   - netfilter: ipset: prevent uninit-value in hash_ip6_add

   - geneve: pull IP header before ECN decapsulation

   - mpls: ensure LSE is pullable in TC and openvswitch paths

   - vxlan: respect needed_headroom of lower device

   - batman-adv: Consider fragmentation for needed packet headroom

   - can: drivers: don't count arbitration loss as an error

   - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal

   - inet_ecn: Fix endianness of checksum update when setting ECT(1)

   - ibmvnic: fix various corner cases around reset handling

   - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering

   - net/mlx5: Enforce HW TX csum offload with kTLS"

* tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering
  net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
  net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
  net/mlx5: Fix wrong address reclaim when command interface is down
  net/sched: act_mpls: ensure LSE is pullable before reading it
  net: openvswitch: ensure LSE is pullable before reading it
  net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
  net: mvpp2: Fix error return code in mvpp2_open()
  chelsio/chtls: fix a double free in chtls_setkey()
  rtw88: debug: Fix uninitialized memory in debugfs code
  vxlan: fix error return code in __vxlan_dev_create()
  net: pasemi: fix error return code in pasemi_mac_open()
  cxgb3: fix error return code in t3_sge_alloc_qset()
  net/x25: prevent a couple of overflows
  dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
  net: ip6_gre: set dev->hard_header_len when using header_ops
  mt76: usb: fix crash on device removal
  iwlwifi: pcie: add some missing entries for AX210
  iwlwifi: pcie: invert values of NO_160 device config entries
  iwlwifi: pcie: add one missing entry for AX210
  ...

Florian Westphal says:

====================
mptcp: reject invalid mp_join requests right away

At the moment MPTCP can detect an invalid join request (invalid token,
max number of subflows reached, and so on) right away but cannot reject
the connection until the 3WHS has completed.
Instead the connection will complete and the subflow is reset afterwards.

To send the reset most information is already available, but we don't have
good spot where the reset could be sent:

1. The ->init_req callback is too early and also doesn't allow to return an
   error that could be used to inform the TCP stack that the SYN should be
   dropped.

2. The ->route_req callback lacks the skb needed to send a reset.

3. The ->send_synack callback is the best fit from the available hooks,
   but its called after the request socket has been inserted into the queue
   already. This means we'd have to remove it again right away.

From a technical point of view, the second hook would be best:
 1. Its before insertion into listener queue.
 2. If it returns NULL TCP will drop the packet for us.

Problem is that we'd have to pass the skb to the function just for MPTCP.

Paolo suggested to merge init_req and route_req callbacks instead:
This makes all info available to MPTCP -- a return value of NULL drops the
packet and MPTCP can send the reset if needed.

Because 'route_req' has a 'const struct sock *', this means either removal
of const qualifier, or a bit of code churn to pass 'const' in security land.

This does the latter; I did not find any spots that need write access to struct
sock.

To recap, the two alternatives are:
1. Solve it entirely in MPTCP: use the ->send_synack callback to
   unlink the request socket from the listener & drop it.
2. Avoid 'security' churn by removing the const qualifier.
====================

Link: https://lore.kernel.org/r/20201130153631.21872-1-fw@strlen.de


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

RFC 8684 says:
 If the token is unknown or the host wants to refuse subflow establishment
 (for example, due to a limit on the number of subflows it will permit),
 the receiver will send back a reset (RST) signal, analogous to an unknown
 port in TCP, containing an MP_TCPRST option (Section 3.6) with an
 "MPTCP specific error" reason code.

mptcp-next doesn't support MP_TCPRST yet, this can be added in another
change.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Multipath-TCP standard (RFC 8684) says that an MPTCP host should send
a TCP reset if the token in a MP_JOIN request is unknown.

At this time we don't do this, the 3whs completes and the 'new subflow'
is reset afterwards.  There are two ways to allow MPTCP to send the
reset.

1. override 'send_synack' callback and emit the rst from there.
   The drawback is that the request socket gets inserted into the
   listeners queue just to get removed again right away.

2. Send the reset from the 'route_req' function instead.
   This avoids the 'add&remove request socket', but route_req lacks the
   skb that is required to send the TCP reset.

Instead of just adding the skb to that function for MPTCP sake alone,
Paolo suggested to merge init_req and route_req functions.

This saves one indirection from syn processing path and provides the skb
to the merged function at the same time.

'send reset on unknown mptcp join token' is added in next patch.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.

However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in an error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20201203114452.1060017-1-colin.king@canonical.com

This object lives inside the trunner output dir,
i.e. tools/testing/selftests/bpf/no_alu32/btf_data.o

At some point it gets copied into the parent directory during another
part of the build, but that doesn't happen when building
test_progs-no_alu32 from clean.

Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20201203120850.859170-1-jackmanb@google.com

I've seen a situation, where a process that's under pprof constantly
generates SIGPROF which prevents program loading indefinitely.
The right thing to do probably is to disable signals in the upper
layers while loading, but it still would be nice to get some error from
libbpf instead of an endless loop.

Let's add some small retry limit to the program loading:
try loading the program 5 (arbitrary) times and give up.

v2:
* 10 -> 5 retires (Andrii Nakryiko)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201202231332.3923644-1-sdf@google.com

Pull s390 fixes from Heiko Carstens:
 "One commit is fixing lockdep irq state tracing which broke with -rc6.

  The other one fixes logical vs physical CPU address mixup in our PCI
  code.

  Summary:

   - fix lockdep irq state tracing

   - fix logical vs physical CPU address confusion in PCI code"

* tag 's390-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix irq state tracing
  s390/pci: fix CPU address in MSI for directed IRQ

When we added sanitising of map names before loading programs to libbpf, we
still allowed periods in the name. While the kernel will accept these for
the map names themselves, they are not allowed in file names when pinning
maps. This means that bpf_object__pin_maps() will fail if called on an
object that contains internal maps (such as sections .rodata).

Fix this by replacing periods with underscores when constructing map pin
paths. This only affects the paths generated by libbpf when
bpf_object__pin_maps() is called with a path argument. Any pin paths set
by bpf_map__set_pin_path() are unaffected, and it will still be up to the
caller to avoid invalid characters in those.

Fixes: 113e6b7e

 ("libbpf: Sanitise internal map names so they are not rejected by the kernel")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com

Pull 9p fixes from Dominique Martinet:
 "Restore splice functionality for 9p"

* tag '9p-for-5.10-rc7' of git://github.com/martinetd/linux:
  fs: 9p: add generic splice_write file operation
  fs: 9p: add generic splice_read file operations

Before this patch, a program with unspecified type
(BPF_PROG_TYPE_UNSPEC) would be passed to the BPF syscall, only to have
the kernel reject it with an opaque invalid argument error. This patch
makes libbpf reject such programs with a nicer error message - in
particular libbpf now tries to diagnose bad ELF section names at both
open time and load time.

Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203043410.59699-1-andreimatei1@gmail.com

KP Singh says:

====================

From: KP Singh <kpsingh@google.com>

# v3 -> v4

* Fix typos.
* Update commit message for the indentation patch.
* Added Andrii's acks.

# v2 -> v3

* Added missing tags.
* Indentation fixes + some other fixes suggested by Andrii.
* Re-indent file to tabs.

The selftest for the bpf_ima_inode_hash helper uses a shell script to
setup the system for ima. While this worked without an issue on recent
desktop distros, it failed on environments with stripped out shells like
busybox which is also used by the bpf CI.

This series fixes the assumptions made on the availablity of certain
command line switches and the expectation that securityfs being mounted
by default.

It also adds the missing kernel config dependencies in
tools/testing/selftests/bpf and, lastly, changes the indentation of
ima_setup.sh to use tabs.
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

The file was formatted with spaces instead of tabs and went unnoticed
as checkpatch.pl did not complain (probably because this is a shell
script). Re-indent it with tabs to be consistent with other scripts.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-5-kpsingh@chromium.org

The ima selftest restricts its scope to a test filesystem image
mounted on a loop device and prevents permanent ima policy changes for
the whole system.

Fixes: 34b82d3a

 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-4-kpsingh@chromium.org

SecurityFS may not be mounted even if it is enabled in the kernel
config. So, check if the mount exists in /proc/mounts by parsing the
file and, if not, mount it on /sys/kernel/security.

Fixes: 34b82d3a

 ("bpf: Add a selftest for bpf_ima_inode_hash")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203191437.666737-3-kpsingh@chromium.org