https://git.beagleboard.org/beagleconnect/linux/wpanusb/-/commit/6aa9bf65b9d88a2c9a111e7b4aed03de2be9413d


Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

https://github.com/sfjro/aufs-standalone/commit/accf229fa33ab8df2cdc6e9878220f9455cd6e6b


Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

v4l:vxd-dec:Flushing all the IO buffers and releasing all the held buffers while joing v4l2 job_abort.

This patch does the fulsh operation by releasing all the
locked up buffers in the driver.
It throws the v4l2 harmless traces while trying to
re-release the released buffers.

Signed-off-by: Prashanth Kumar Amai <prashanth.amai@ti.com>

Signed-off-by: Keerthy <j-keerthy@ti.com>

Confine the memory map changes into a separate rtos-memory-map.dts
which describes the common memory map for all RTOS remoteprocs.

vision-apps.dtbo uses this and also disables capture and display
related peripherals from Linux so that it can be used by RTOS.

edgeai-apps.dtbo expects these devices to be owned by linux, so
it uses the rtos-memory-map customization only.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>

TI-Feature: connectivity
TI-Branch: connectivity-ti-linux-5.10.y

* 'connectivity-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/connectivity

:
  net: ethernet: ti: icssg_prueth: Remove Rx enable in init sequence

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Ravi Gunasekaran authored 2 years ago and Vignesh Raghavendra committed 2 years ago

During startup, when network traffic is present and the PRU
firmware receives packets while the initialization is in process,
Rx stalls.

Fix this by moving the Rx enable from driver to firmware.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

TI-Feature: multimedia
TI-Branch: multimedia-ti-linux-5.10.y

* 'multimedia-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/multimedia

:
  vxe-vxd: decoder: Capture buffer cleanup
  vxe-vxd: decoder: Improve performance of h265 decoder

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Buffers were being left in active state when streams were stopped
which resulted in memory leaks and failures when restarting pipelines.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>

h265 decoder performance has been significantly worse than h264 decoder
due to latency in gstreamer format negotiation. Remove this latency by
aligning the pixel resolution earlier.

Signed-off-by: Brandon Brnich <b-brnich@ti.com>

TI-Feature: rpmsg
TI-Branch: rpmsg-ti-linux-5.10.y-intg

* 'rpmsg-ti-linux-5.10.y-intg' of git://git.ti.com/rpmsg/rpmsg

:
  remoteproc: ti_k3_m4_remoteproc: Fix build warnings around k3_m4_rproc_stop()
  remoteproc: ti_k3_m4_remoteproc: Fix unused-but-set-variable warnings

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

TI-Feature: platform_base
TI-Branch: platform-ti-linux-5.10.y

* 'platform-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/platform

:
  arm64: dts: ti: k3-am625-sk-lpmdemo: Add lpm region to dmsc
  arm64: dts: ti: k3-am62-main: rm lpm region from dmsc
  arm64: ti: dts: move 1.4GHZ OPP table to k3-am625
  ti_config_fragments: v8_baseport: Enable MCRC module

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

This region is needed for the lpm stub to load and execute full system
suspend. Also disable the wkup r5fss because it lacks LPM support.

Signed-off-by: Dhruva Gole <d-gole@ti.com>

Remove the "lpm" region from am62-main DT and rather have it in the
lpmdemo DT since Low Power Mode is currently said to be supported only
using k3-am625-sk-lpmdemo
This will help fix the k3_r5_rproc: probe issues

Signed-off-by: Dhruva Gole <d-gole@ti.com>

Move the OPP Table entry for 1.4GHz from am62x-sk-common to am625-sk DT
because it's not a common property across all sk variants of am62x

Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>

K3 devices include MCRC engine for crc64 calculation.
Enable module to be built for K3 devices.

Also enable algif_hash module, which is needed to access MCRC module
from userspace.

Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>

TI-Feature: platform_base
TI-Branch: platform-ti-linux-5.10.y

* 'platform-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/platform

:
  crypto: ti: mcrc: Add support for data length not multiple of 64-bit

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Merge branch 'rpmsg-ti-linux-5.10.y' of git://git.ti.com/rpmsg/rpmsg into rpmsg-ti-linux-5.10.y-intg

* 'rproc-linux-5.10.y' of git://git.ti.com/rpmsg/remoteproc:
  remoteproc: ti_k3_m4_remoteproc: Fix build warnings around k3_m4_rproc_stop()
  remoteproc: ti_k3_m4_remoteproc: Fix unused-but-set-variable warnings

Fix below warning:

 drivers/remoteproc/ti_k3_m4_remoteproc.c: In function 'k3_m4_rproc_stop':
   drivers/remoteproc/ti_k3_m4_remoteproc.c:379:46: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
     379 |         ret = mbox_send_message(kproc->mbox, (void *)msg);
         |                                              ^

Fixes: 99cff963

 ("remoteproc: k3-m4: extend stop to send shutdown message to m4 core")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Drop following unused variables

All warnings (new ones prefixed by >>):

   drivers/remoteproc/ti_k3_m4_remoteproc.c: In function 'k3_m4_rproc_start':
   drivers/remoteproc/ti_k3_m4_remoteproc.c:333:13: warning: variable 'boot_addr' set but not used [-Wunused-but-set-variable]
     333 |         u32 boot_addr;
         |             ^~~~~~~~~
   drivers/remoteproc/ti_k3_m4_remoteproc.c: In function 'k3_m4_rproc_resume':
   drivers/remoteproc/ti_k3_m4_remoteproc.c:916:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
     916 |         int ret = 0;
         |             ^~~

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Add support for length of input data which is not multiple of 64-bit.
Remaining bytes are processed using software calculation.

Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>

TI-Feature: connectivity
TI-Branch: connectivity-ti-linux-5.10.y

* 'connectivity-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/connectivity

:
  HACK: usb: dwc3-am62: Fix spurious wake up
  usb: dwc3-am62: Fix up wake-up configuration
  usb: dwc3: dwc3-am62: Enable as a wakeup soure by default
  arm64: dts: ti: k3-am62a7: Add overlay for second CPSW3G Port
  arm64: dts: ti: k3-am62a7-sk: Add alias for CPSW3G MAC port 1

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Roger Quadros authored 2 years ago and Vignesh Raghavendra committed 2 years ago

Enabling linestate wake up is causing spurious wake up
on deep sleep. Disable it till root caused.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Roger Quadros authored 2 years ago and Vignesh Raghavendra committed 2 years ago

Explicitly set and clear wakeup config so we don't leave anything
to chance.

Clear wakeup status on suspend so we know what caused wake up.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Roger Quadros authored 2 years ago and Vignesh Raghavendra committed 2 years ago

USB module can wakeup system. Enable it as a wakeup source
by default. Finer grain wakeup enable/disable can be done
from the power/wakeup system control file of the respective
USB device.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Siddharth Vadapalli authored 2 years ago and Vignesh Raghavendra committed 2 years ago

The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A-SK board supports
RGMII mode.

Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the
Add-On Ethernet Card.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

Siddharth Vadapalli authored 2 years ago and Vignesh Raghavendra committed 2 years ago

Add alias for CPSW3G MAC port 1 to enable kernel to fetch MAC Address
directly from U-Boot.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

TI-Feature: platform_base
TI-Branch: platform-ti-linux-5.10.y

* 'platform-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/platform

:
  Revert "ti_config_fragments: v8_baseport: Enable TPS6594X MFD & RTC configs"

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

This reverts commit e2cb4c14

.

This commit was leading to kernel crash at J7200 board.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>

Merge tag 'v5.10.168' of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux into ti-linux-5.10.y-cicd

This is the 5.10.168 stable release

* tag 'v5.10.168' of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux

: (286 commits)
  Linux 5.10.168
  Fix page corruption caused by racy check in __free_pages
  arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
  arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
  arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
  riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte
  ceph: flush cap releases when the session is flushed
  usb: typec: altmodes/displayport: Fix probe pin assign check
  usb: core: add quirk for Alcor Link AK9563 smartcard reader
  btrfs: free device in btrfs_close_devices for a single device filesystem
  net: USB: Fix wrong-direction WARNING in plusb.c
  cifs: Fix use-after-free in rdata->read_into_pages()
  pinctrl: intel: Restore the pins that used to be in Direct IRQ mode
  spi: dw: Fix wrong FIFO level setting for long xfers
  pinctrl: single: fix potential NULL dereference
  pinctrl: aspeed: Fix confusing types in return value
  ALSA: pci: lx6464es: fix a debug loop
  selftests: forwarding: lib: quote the sysctl values
  rds: rds_rm_zerocopy_callback() use list_first_entry()
  net/mlx5: fw_tracer, Zero consumer index when reloading the tracer
  ...

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

TI-Feature: connectivity
TI-Branch: connectivity-ti-linux-5.10.y

* 'connectivity-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/connectivity

:
  net: hsr: Fix build error after merging linux-stable

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Ravi Gunasekaran authored 2 years ago and Vignesh Raghavendra committed 2 years ago

Fix the build error in send_hsr_supervision_frame

Fixes: 8ffeeca9 ("Merge tag 'v5.10.165' of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux

 into ti-linux-5.10.y-cicd")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

TI-Feature: platform_base
TI-Branch: platform-ti-linux-5.10.y

* 'platform-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/platform

:
  ti_config_fragments: v8_baseport: Enable CPU Idle
  ti_config_fragments: v8_baseport: Enable TPS6594X MFD & RTC configs

Signed-off-by: LCPD Auto Merger <lcpd_integration@list.ti.com>

Enables CPU Idle framework and the default Menu governor for CPU idle
time management. The framework can be used to customize the CPU idle states
through the sysfs interface [1].

This should not impact existing K3 platforms that do not have idle states
defined in the DT files. Standby WFI state is considered standard on all ARM
platforms [2]. ARM core and cluster level power states other than WFI are
currently unexplored on K3 devices.

There was no noticeable change in power consumption or memory footprint
by enabling this option on AM62x-sk board.

[1] https://www.kernel.org/doc/html/latest/admin-guide/pm/cpuidle.html


[2] From __initdata in drivers/cpuidle/cpuidle-arm.c

Signed-off-by: Vibhore Vardhan <vibhore@ti.com>